Date: Sat, 30 Nov 2002 02:02:37 -0500 From: <freebsd-questions@audiorapture.com> To: <freebsd-questions@freebsd.org> Subject: No Disks Found Message-ID: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAXe5GJWfYwEiAKOk0SIZUUsKAAAAQAAAA0icN1HPW3ki5iLUwAoSZPgEAAAAA@audiorapture.com>
next in thread | raw e-mail | index | archive | help
Hi,
I am trying to install 4.7 on a laptop and was greeted with a "no disks
found" message in the installer. It seems like there is some kind of
conflict with the IDE controller, but this is way beyond me.
Below is the output of "boot -v", if anyone can offer any help it would
be highly appreciated.
Thanks.
-Jason
>> FreeBSD/i386 BOOT
Default: 0:fd(0,a)/boot/loader
boot:
Uncompressing ... done
Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 639kB/72704kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(toor@raleigh1.FreeBSD.Org, Tue Sep 10 00:51:15 EDT 2002)
/kernel text=0x283391 data=0x3223c+0x33258 /
Please insert MFS root floppy and press enter:
-
Hit [Enter] to boot immediately, or any other key for command prompt.
avail memory = 65036288 (63512K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00ec050
bios32: Entry = 0xee600 (c00ee600) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x263e
pnpbios: Found PnP BIOS data at 0xc00ff000
pnpbios: Entry = ea000:13de Rev = 1.0
pnpbios: OEM ID 744e
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0823000.
Preloaded mfs_root "/mfsroot" at 0xc0823090.
Intel Pentium detected, installing workaround for F00F bug
md0: Preloaded image </mfsroot> 4423680 bytes at 0xc03e9834
Creating DISK md0
Creating DISK md1
md1: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x800008b0
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=04061039)
pcib-: pcib0 exists, using next available unit number
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 86647604 bytes/sec
bzero() bandwidth = 43476370 bytes/sec
pcib0: <SiS 85c501> on motherboard
found-> vendor=0x1039, dev=0x0406, revid=0x00
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1039, dev=0x0008, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1039, dev=0x0601, revid=0x01
class=01-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 00000174, size 2
map[14]: type 1, range 32, base 000001f4, size 2
map[18]: type 1, range 32, base 00000374, size 2
map[1c]: type 1, range 32, base 000003f4, size 2
found-> vendor=0x1023, dev=0x9660, revid=0xd3
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
map[10]: type 1, range 32, base 08000000, size 22
map[14]: type 1, range 32, base 08800000, size 16
map[18]: type 1, range 32, base 08400000, size 22
found-> vendor=0x119b, dev=0x1221, revid=0x02
class=06-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
map[10]: type 1, range 32, base 000003e0, size 2
found-> vendor=0x119b, dev=0x1221, revid=0x02
class=06-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
map[10]: type 1, range 32, base 000003e4, size 2
pci0: <PCI bus> on pcib0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port
0x3f4-0x3f7,0x374-0x377,0x1f4-0x1f7,0x174-0x177 at device 1.1 on pci0
atapci0: Busmastering DMA not supported
ata-: ata2 exists, using next available unit number
ata2: iobase=0x0174 altiobase=0x01f6 bmaddr=0x0000
ata2: at 0x174 on atapci0
ata2: unable to allocate interrupt
device_probe_and_attach: ata2 attach returned 6
ata3: iobase=0x0374 altiobase=0x03f6 bmaddr=0x0000
ata3: mask=03 ostat0=13 ostat2=13
ata3-master: ATAPI 13 78
ata3-slave: ATAPI 13 78
ata3: mask=03 stat0=13 stat1=13
ata3-master: ATA ff a5
ata3-slave: ATA ff a5
ata3: devices=03
ata3: at 0x374 on atapci0
ata3: unable to allocate interrupt
device_probe_and_attach: ata3 attach returned 6
pci0: <Trident model 9660 VGA-compatible display device> (vendor=0x1023,
dev=0x9660) at 6.0
pci_cfgintr: can't route an interrupt to 0:13 INTA
pcic0: <Omega 82C094G> port 0x3e0-0x3e3 at device 13.0 on pci0
pcic0: Polling mode
pcic0: PCI Configuration space:
0x00: 0x1221119b 0x04800143 0x06050002 0x00000000
0x10: 0x000003e1 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x000001ff
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pccard1: <PC Card 16-bit bus (classic)> on pcic0
pci_cfgintr: can't route an interrupt to 0:14 INTA
pcic1: <Omega 82C094G> port 0x3e4-0x3e7 at device 14.0 on pci0
pcic1: Polling mode
pcic1: PCI Configuration space:
0x00: 0x1221119b 0x04800143 0x06050002 0x00000000
0x10: 0x000003e5 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x000001ff
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard2: <PC Card 16-bit bus (classic)> on pcic1
pccard3: <PC Card 16-bit bus (classic)> on pcic1
pcib1: <SiS 85c601> on motherboard
pci1: <PCI bus> on pcib1
ex_isa_identify()
pcic-: pcic0 exists, using next available unit number
pcic-: pcic1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 failed to probe at port 0x1f0 irq 14 on isa0
ata1 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 0c 02 3c
psm: status 0c 02 3c
psm: status 0c 02 3c
psm: data 08 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 06 90 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic2: Cannot get I/O range
pcic2 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic3: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at port 0x378-0x37f irq 7 on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:0345ef3f 0..837=838 cylinders, 0..239=240 heads, 1..63=63 sectors
1:03feff00 0..1022=1023 cylinders, 0..255=256 heads, 1..0=0 sectors
2:03fdfe3f 0..1021=1022 cylinders, 0..254=255 heads, 1..63=63 sectors
3:02fe0200 0..766=767 cylinders, 0..2=3 heads, 1..0=0 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: sl0 attached
Mounting root from ufs:/dev/md0c
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /stand/sysinstall
pcic1: Power: Vcc=0 Vpp=0
pcic1: Power applied
Power complete.
pcic1: Power: Vcc=-1 Vpp=-1
pcic1: Autodetected 5.0V card
pcic1: Power applied
pcic1: Output enabled
pcic1: Settling complete
Power complete.
pccard: card inserted, slot 2
pcic1: reset 1 int is 0 stat is 4f
pcic1: reset 2 int is 60 stat is 6f
pcic1: reset 3 int is 60 stat is 6f
/stand/sysinstall running as init on serial console
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAXe5GJWfYwEiAKOk0SIZUUsKAAAAQAAAA0icN1HPW3ki5iLUwAoSZPgEAAAAA>