Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 9 Aug 1998 08:51:07 -0400 (EDT)
From:      Spidey <beaupran@JSP.UMontreal.CA>
To:        Stefan Veith <veith@bigfoot.com>
Cc:        freebsd-questions@FreeBSD.ORG
Subject:   Re: problems with Luigis4s sound driver
Message-ID:  <Pine.BSF.3.96.980809085000.6478A-100000@outpost.nada.org>
In-Reply-To: <35CD8B4D.5EFE31B8@bigfoot.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 9 Aug 1998, Stefan Veith wrote:

> Hello!
> 
> I have just installed FreeBSD-2.2.6 and want to add sound support for my
> SoundBlaster 16 (original) card. As I heared a lot of positive comments
> on the new driver, I included the following lines into my kernel
> configureation file to make it work:
> 
> controller	pnp0
> device pcm0	at isa? port? tty irq 7 drq 1 flags 0x0 vector pcmintr
> 
> Nevertheless I now get this dmesg output:
> 
> Probing for PnP devices:
> CSN 1 Vendor ID: CTL00f0 [0xf0008c0e] Serial 0xffffffff
> pcm1 (SB16pnp <Vibra16X> sn 0xffffffff) at 0x220 irq 7 drq 3 flags 0x11
> id 8
> Probing for devices on the ISA bus:
> sc0 at 0x60-0x6f irq 1 on motherboard
> sc0: VGA color <16 virtual consoles, flags=0x0>
> pcm0 not found at 0xffffffff                  
> 
> Why does the kernel recognize pcm1 but not pcm0 whereas I have only one
> card? Is everything working well then???
> 
> However doing a "cat chords.wav > /dev/audio1" produces only crushing
> noises instead of a melody. Where is my mistake then, I read all
> available information materail very carefully.

This is normal. Try to do cat sound.au > /dev/audio ... convert .wav to
.au , it's the standard used for the audio device.
 
> 	Stefan.
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
> 

Spidey

How 'bout a little ride through your own world?
http://www.JSP.UMontreal.CA/~beaupran/


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980809085000.6478A-100000>