Date: Sat, 3 Feb 1996 00:31:04 -0800 (PST) From: Paul Traina <pst@Shockwave.COM> To: FreeBSD-gnats-submit@freebsd.org Subject: kern/989: devfs error messages on boot Message-ID: <199602030831.AAA00376@precipice.shockwave.com> Resent-Message-ID: <199602030840.AAA09794@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 989
>Category: kern
>Synopsis: devfs error messages on boot
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sat Feb 3 00:40:01 PST 1996
>Last-Modified:
>Originator: Paul Traina
>Organization:
Shockwave Engineering
>Release: FreeBSD 2.2-CURRENT i386
>Environment:
FreeBSD 2.2-CURRENT #0: Sat Feb 3 00:10:22 PST 1996
pst@precipice.shockwave.com:/usr/src.current/sys/compile/PRECIPICE
>Description:
FreeBSD 2.2-CURRENT #0: Sat Feb 3 00:10:22 PST 1996
pst@precipice.shockwave.com:/usr/src.current/sys/compile/PRECIPICE
CPU: Pentium (59.99-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x515 Stepping=5
Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC>
real memory = 16777216 (16384K bytes)
avail memory = 14729216 (14384K bytes)
DEVFS: ready for devices
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 9 maddr 0xd8000 msize 8192 on isa
ed0: address 00:00:c0:93:88:53, type WD8013EPC (8 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 at 0x3e8-0x3ef irq 5 on isa
sio2: type 16550A
lpt0 at 0x3bc-0x3c3 irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 765
fd0: 1.44MB 3.5in
bt0: Bt445S/ 0-(32bit) bus
bt0: Your card cannot DMA above 16MB boundary. Bounce buffering enabled.
bt0: reading board settings, dma=5, int=11
bt0: version 3.37, fast sync, no parity, 32 mbxs, 32 ccbs
bt0: targ 0 sync rate=10.00MB/s(100ns), offset=15
bt0: targ 1 sync rate= 4.54MB/s(220ns), offset=15
bt0: targ 2 sync rate=10.00MB/s(100ns), offset=15
bt0: targ 4 async
bt0: targ 6 sync rate= 4.54MB/s(220ns), offset=15
bt0: Using Strict Round robin scheme
bt0 at 0x330 irq 11 drq 5 on isa
(bt0:0:0): "QUANTUM PD1800S 3161" type 0 fixed SCSI 2
sd0(bt0:0:0): Direct-Access 1717MB (3517856 512 byte sectors)
(bt0:1:0): "MAXTOR P0-12S JB22" type 0 fixed SCSI 1
sd1(bt0:1:0): Direct-Access 997MB (2042265 512 byte sectors)
(bt0:2:0): "QUANTUM EMPIRE_1080S 111V" type 0 fixed SCSI 2
sd2(bt0:2:0): Direct-Access 1029MB (2109376 512 byte sectors)
(bt0:4:0): "NEC CD-ROM DRIVE:210 1.0" type 5 removable SCSI 1
cd0(bt0:4:0): CD-ROM
cd0(bt0:4:0): NOT READY csi:20,b,0,0 asc:b,0
can't get the size
(bt0:6:0): "CONNER CTMS 3200 7.00" type 1 removable SCSI 2
st0(bt0:6:0): Sequential-Access density code 0x0, drive empty
npx0 on motherboard
npx0: INT 16 interface
qcam0 at 0x3bc on isa
joy0 at 0x201 on isa
joy0: joystick
gus0 at 0x220 irq 12 drq 1 flags 0x3 on isa
at 0x220 irq 12 dma 1,3
devfs ready to run
Device sd2s1a: name slot allocation failed (E=17)
Device rsd2s1a: name slot allocation failed (E=17)
Device sd2s1b: name slot allocation failed (E=17)
Device rsd2s1b: name slot allocation failed (E=17)
Device sd2s1e: name slot allocation failed (E=17)
Device rsd2s1e: name slot allocation failed (E=17)
Device sd2s1a: name slot allocation failed (E=17)
Device rsd2s1a: name slot allocation failed (E=17)
Device sd2s1b: name slot allocation failed (E=17)
Device rsd2s1b: name slot allocation failed (E=17)
Device sd2s1e: name slot allocation failed (E=17)
Device rsd2s1e: name slot allocation failed (E=17)
>How-To-Repeat:
Boot 2.2-current as of today (2/2/96) with DEVFS.
>Fix:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199602030831.AAA00376>