Date: Sat, 7 Jan 2006 01:57:14 +0200 From: <gooroo@list.ru> To: <questions@FreeBSD.org> Subject: problem with USB Mobile data cabel prolific 2303 FreeBSD v5.3 Message-ID: <000c01c6131c$f0f83c10$0a05a8c0@gooroo>
next in thread | raw e-mail | index | archive | help
Sorry, I am russian and bad know English! <Cat> of kernel config machine i386cpu I686_CPUident GENERIChints "gooroo.hints" # Default = places to look for devices.options PAEoptions SCHED_4BSD # 4BSD = scheduleroptions INET # InterNETworkingoptions FFS # Berkeley Fast = Filesystemoptions SOFTUPDATES # Enable FFS soft updates support##options = UFS_ACL # Support for access control lists##options UFS_DIRHASH # = Improve performance on big directoriesoptions MD_ROOT # MD is a = potential root device##options NFSCLIENT # Network Filesystem = Client##options NFSSERVER # Network Filesystem Server##options NFS_ROOT = # NFS usable as /, requires NFSCLIENToptions MSDOSFS # MSDOS = Filesystemoptions CD9660 # ISO 9660 Filesystem##options PROCFS # Process = filesystem (requires PSEUDOFS)##options PSEUDOFS # Pseudo-filesystem = frameworkoptions GEOM_GPT # GUID Partition Tables.##options COMPAT_43 # = Compatible with BSD 4.3 [KEEP THIS!]##options COMPAT_FREEBSD4 # = Compatible with FreeBSD4##options KTRACE # ktrace(1) support##options = SYSVSHM # SYSV-style shared memory##options SYSVMSG # SYSV-style message = queues##options SYSVSEM # SYSV-style semaphoresoptions = _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensionsoptions = KBD_INSTALL_CDEV # install a CDEV entry in /dev##options = AHC_REG_PRETTY_PRINT # Print register bitfields in debug# output. Adds = ~128k to driver.##options AHD_REG_PRETTY_PRINT # Print register = bitfields in debug# output. Adds ~215k to driver.##options = ADAPTIVE_GIANT # Giant mutex is adaptive.device apic # I/O APICdevice = acpi # I/O APIC# Bus support. Do not remove isa, even if you have no isa = slotsdevice isadevice eisadevice pci# Floppy drivesdevice fdc# ATA and = ATAPI devicesdevice atadevice atadisk # ATA disk drivesdevice ataraid # = ATA RAID drivesdevice atapicd # ATAPI CDROM drivesdevice atapifd # ATAPI = floppy drivesdevice atapist # ATAPI tape drivesoptions ATA_STATIC_ID # = Static device numbering# atkbdc0 controls both the keyboard and the PS/2 = mousedevice atkbdc # AT keyboard controllerdevice atkbd # AT = keyboarddevice psm # PS/2 mousedevice vga # VGA video card driverdevice = splash # Splash screen and screen saver support# syscons is the default = console driver, resembling an SCO consoledevice scdevice agp # support = several AGP chipsets# Floating point support - do not disable.device = npx# Power management support (see NOTES for more options)#device apm# = Add suspend/resume support for the i8254.device pmtimer# PCCARD (PCMCIA) = support# PCMCIA and cardbus bridge supportdevice cbb # cardbus (yenta) = bridgedevice pccard # PC Card (16-bit) busdevice cardbus # CardBus = (32-bit) bus# Serial (COM) portsdevice sio # 8250, 16[45]50 based serial = ports# Parallel portdevice ppcdevice ppbus # Parallel port bus = (required)device lpt # Printerdevice plip # TCP/IP over paralleldevice = ppi # Parallel port interface device#device vpo # Requires scbus and da# = PCI Ethernet NICs that use the common MII bus controller code.# NOTE: Be = sure to keep the 'device miibus' line in order to use these NICs!device = miibus # MII bus supportdevice rl # RealTek 8129/8139device wb # Winbond = W89C840F# Wireless NIC cardsdevice wlan # 802.11 supportdevice wi # = WaveLAN/Intersil/Symbol 802.11 wireless NICs.# Pseudo devices.device = loop # Network loopbackdevice mem # Memory and kernel memory = devicesdevice io # I/O devicedevice random # Entropy devicedevice ether = # Ethernet supportdevice ppp # Kernel PPPdevice tun # Packet = tunnel.device pty # Pseudo-ttys (telnet etc)device md # Memory = "disks"device tap #Virtual Ethernet driverdevice sl #Serial Line IP# USB = supportdevice uhci # UHCI PCI->USB interfacedevice ohci # OHCI PCI->USB = interfacedevice usb # USB Bus (required)device ugen # Genericdevice uhid = # "Human Interface Devices"options NETGRAPHoptions = NETGRAPH_BRIDGEoptions NETGRAPH_DEVICEoptions NETGRAPH_ECHOoptions = NETGRAPH_IP_INPUToptions NETGRAPH_KSOCKEToptions = NETGRAPH_MPPC_ENCRYPTIONoptions NETGRAPH_PPPoptions = NETGRAPH_PPPOEoptions NETGRAPH_PPTPGREoptions NETGRAPH_SOCKEToptions = NETGRAPH_SPLIToptions NETGRAPH_SPPPoptions NETGRAPH_TTY#options = NETGRAPH_MPPC_COMPRESSIONoptions NETGRAPH_ONE2MANYoptions = NETGRAPH_RFC1490options NETGRAPH_TEEoptions NETGRAPH_UIoptions = NETGRAPH_VJCdevice spppdevice gre#device umodemdevice pppoptions = PPP_BSDCOMPoptions PPP_DEFLATEoptions PPP_FILTERoptions = IPFIREWALLoptions IPFIREWALL_VERBOSEoptions = IPFIREWALL_VERBOSE_LIMIT=3D100options IPFIREWALL_FORWARDoptions = IPDIVERToptions DUMMYNEToptions HZ=3D10device uhcioptions = CPU_ENABLE_SSE# Options for sio:options COM_ESP # Code for Hayes = ESP.options COM_MULTIPORT # Code for some cards with shared IRQs.options = CONSPEED=3D115200 # Speed for serial consoleAfter config and install = kernel I am run:kldload uplcom.kokldload ucom.kokldload uvscom.koBut = device </dev/ucom0> not createdbut deamon usbd runing and kernel = compiled with ucom,uplcom options.What me do.If We can answer me in = Russian.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000c01c6131c$f0f83c10$0a05a8c0>