Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 17 Oct 2016 13:31:48 +0100
From:      krad <kraduk@gmail.com>
To:        Rostislav Krasny <rosti.bsd@gmail.com>
Cc:        freebsd-stable <freebsd-stable@freebsd.org>, "Eugene M. Zheganin" <emz@norma.perm.ru>
Subject:   Re: I'm upset about FreeBSD
Message-ID:  <CALfReyfVTMJDUk=0i=6y-6HUaAYHPV2PNiXbB1MpNB2fwKMNDg@mail.gmail.com>
In-Reply-To: <CANt7McGNVuZks=jn_%2BJGdn6GSwB0p917gmDiJDVJyq5nYskRrw@mail.gmail.com>
References:  <CANt7McFNq%2BYSGc_9%2BH%2BUuTDO=df9Q29psRMVmiYR=q53DdBcRQ@mail.gmail.com> <CANt7McGNVuZks=jn_%2BJGdn6GSwB0p917gmDiJDVJyq5nYskRrw@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Does this just affect MBR layouts? If possible you might want to consider
UEFI booting for both windows and other os's, It's probably safer as you
dont need to plays with partitions and bootloaders.

On 17 October 2016 at 13:11, Rostislav Krasny <rosti.bsd@gmail.com> wrote:

> On 17.10.2016 11:57:16 +0500, Eugene M. Zheganin wrote:
> > Hi.
> >
> > On 17.10.2016 5:44, Rostislav Krasny wrote:
> > > Hi,
> > >
> > > I've been using FreeBSD for many years. Not as my main operating
> > > > system, though. But anyway several bugs and patches were contributed
> > > and somebody even added my name into the additional contributors list.
> > > That's pleasing but today I tried to install the FreeBSD 11.0 and I'm
> > > > upset about this operating system.
> > >
> > > First of all I faced an old problem that I reported here a year ago:
> > > http://comments.gmane.org/gmane.os.freebsd.stable/96598
> > > > Completely new USB flash drive flashed by the
> > > FreeBSD-11.0-RELEASE-i386-mini-memstick.img file kills every Windows
> > > again. If I use the Rufus util to write the img file (using DD mode)
> > > the Windows dies immediately after the flashing. If I use the
> > > Win32DiskImager (suggested by the Handbook) it doesn't reinitialize
> > > the USB storage and Windows dies only if I remove and put that USB
> > > flash drive again or boot Windows when it is connected. Nothing was
> > > done to fix this nasty bug for a year.
> >
> > I saw this particular bug, and I must say - man, it's not FreeBSD, it's
> Rufus.
> > So far Windows doesn't have any decent tool to write the image with. As
> > about Rufus - somehow it does produce broken images on a USB stick
> > (not always though), which make every Windows installation to BSOD
> > immediately after inserting. And this continues until you reinitialize
> the
> > stick boot area.
>
> The DD mode in Rufus and in any other flashing util that supports the
> DD mode (including the native dd(1) program) just writes the image
> file byte by byte without any change, isn't it? If you say the boot
> area re-initialization resolves the BSOD issue then why the boot area
> isn't fixed in the image file at the first place? I agree that Windows
> has a serious bug but why FreeBSD doesn't try to workaround it? After
> all people try to install FreeBSD and if the Windows bug and the
> FreeBSD developers stubbornness prevent them to do so they just can't
> and won't install FreeBSD. This is a lose-lose situation.
>
> > P.S. By the way, win32diskimager is a total mess too. Sometimes it just
> > does nothing instead of writing an image. I did try almost all of the
> free
> >  win32 tools to write image with, and didn't find any that would
> completely
> > satisfy me. Rufus would be the best, if it didn't have this ridiculous
> bug with
> > BSOD.
>
> Did you try the native FreeBSD dd(1) program or a MinGW version of dd(1)?
>
> And what about other issues I've described in my first email? I
> managed to install FreeBSD 11.0 but it still unbootable.
>
>
> P.S. please Cc your replies to me since I don't receive this mailing
> list emails directly, although I'm subscribed.
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CALfReyfVTMJDUk=0i=6y-6HUaAYHPV2PNiXbB1MpNB2fwKMNDg>