Date: Thu, 29 Dec 1994 10:07:46 -0500 (EST) From: "Jonathan M. Bresler" <jmb@kryten.atinc.com> To: "Jordan K. Hubbard" <jkh@time.cdrom.com> Cc: hackers@freefall.cdrom.com, install@freefall.cdrom.com Subject: Re: It's time to release.. The worms! Hahahahaha! Message-ID: <Pine.3.89.9412290916.J15762-0100000@kryten.atinc.com> In-Reply-To: <199412291408.GAA04544@time.cdrom.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--when using the '-c' option at boot. the new values for port, irq, drq, iomem are recorded in the boot messages. use this information to these values listed when setting up the network. so instead of seeing 'ep0 at 0x300' when i '-c'ed the 3c5x9 to 0x340, i would see 'ep0 at 0x340'. a little nit, but i sparked some discussion here when installing 2.0 --when prompted for additional flags for the ifconfig command, provide info: what's available and what's it do to each card. (lets see was it altphys? link2? -link2?, damn it i dont remember!) --continue the install sytle boot till a "done" option is selected from one of the menus. the ncftp fetch of X locked up on me and i had to do the rest by hand--and the way i type that's a very real disadvantage ;) --ncftp has worked fine here during installs, so lets keep it, can the error message that it produces on the alt-f2 screen. dont really remember it--some file or file descriptor message that does not indicate a show stopper, but does cause unfounded concern. jmb Jonathan M. Bresler jmb@kryten.atinc.com | Analysis & Technology, Inc. | 2341 Jeff Davis Hwy play go. | Arlington, VA 22202 ride bike. hack FreeBSD.--ah the good life | 703-418-2800 x346
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.3.89.9412290916.J15762-0100000>