Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 7 Mar 2014 21:41:57 -0500 (EST)
From:      "Michael L. Squires" <mikes@siralan.org>
To:        freebsd-stable@freebsd.org
Subject:   Broadcomm bge in Dell 745/FreeBSD 10-STABLE = no gigabit Ethernet
Message-ID:  <alpine.BSF.2.00.1403072139050.97115@familysquires.net>

next in thread | raw e-mail | index | archive | help

I'm unable to get a Broadcom DCM5754 GigeE (allegedly) interface on a Dell
745 desktop to talk gigabit Ethernet.

It works fine at 100 Mbits/full duplex and works fine, to the extent that one
can tell, under Windows 7 x64 and Centos 5.

Attempts to force it to gigabit through options in rc.conf fail.

The errors look like those reported some years ago for another 745, but I would 
have guessed that that particular problem no longer existed.

I have a workaround (installing an Intel 1000 MT into a PCI slot) so this is
not a critical problem. I'm using the 745 to control an HP MSL6000 tape library 
(2 LTO-3 drives) and amanda from ports and dump are working without
problems, thank you very much.

Mike Squires
mikes@siralan.org
UN*X at home
Since 1986

>From dmesg:

FreeBSD 10.0-STABLE #0 r262738: Tue Mar  4 11:42:23 EST 2014
     root@testbsd:/usr/obj/usr/src/sys/TESTBSD amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz (2126.49-MHz K8-class CPU)
   Origin = "GenuineIntel"  Id = 0x6f2  Family = 0x6  Model = 0xf  Stepping = 2
   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
avail memory = 4038057984 (3850 MB)

bge0: CHIP ID 0x0000b002; ASIC REV 0x0b; CHIP REV 0xb0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5754/5787 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-m
aster, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:19:b9:37:0c:b21

>From pciconf -lv:

bge0@pci0:3:0:0:        class=0x020000 card=0x01da1028 chip=0x167a14e4 rev=0x02 
hdr=0x00
     vendor     = 'Broadcom Corporation'
     device     = 'NetXtreme BCM5754 Gigabit Ethernet PCI Express'
     class      = network
     subclass   = ethernet

ifconfig at 100Mbits DHCP:

ge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>

        ether 00:19:b9:37:0c:b2
        inet 10.100.52.178 netmask 0xfffffe00 broadcast 10.100.53.255
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active

ifconfig forced to 1000Mbits full-duplex with fixed IP(failed):

oge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>

        ether 00:19:b9:37:0c:b2
        inet 10.100.52.178 netmask 0xfffffe00 broadcast 10.100.53.255
        inet6 fe80::219:b9ff:fe37:cb2%bge0 prefixlen 64 scopeid 0x1
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet 1000baseT <full-duplex> (none)
        status: no carrier




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1403072139050.97115>