Date: Thu, 18 May 2000 19:33:25 -0500 From: "Randall D. DuCharme" <randyd@tcainternet.com> To: smp@freebsd.org Subject: Re: FreeBSD 4.0-Release and P6DNF Message-ID: <39248BD5.2D9F885B@tcainternet.com> References: <200005181423.IAA79672@Ilsa.StevesCafe.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks Steve, The BIOS is the latest available for the board. I CVSup'ed the CURRENT sources, built a kernel (and the world) and all is happy.... well at least it runs and doesn't panic on boot. The MPTable output hasn't changed. I'll continue to mess around with it. Thanks again. Steve Passe wrote: > > Hi, > > =============================================================================== > > > > MPTable, version 2.0.15 > > > ... > > -- > > Bus: Bus ID Type > > 0 PCI > > 1 ISA > > -- > > I/O APICs: APIC ID Version State Address > > 2 0x11 usable 0xfec00000 > > -- > > I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# > > ExtINT conforms conforms 1 0 2 0 > > INT conforms conforms 1 1 2 1 > > INT conforms conforms 1 0 2 2 > > INT conforms conforms 1 3 2 3 > > INT conforms conforms 1 4 2 4 > > INT conforms conforms 1 5 2 5 > > INT conforms conforms 1 6 2 6 > > INT conforms conforms 1 7 2 7 > > INT conforms conforms 1 8 2 8 > > INT conforms conforms 1 10 2 10 > > INT conforms conforms 1 12 2 12 > > INT conforms conforms 1 13 2 13 > > INT conforms conforms 1 15 2 20 > > INT active-lo level 1 11 2 16 > > INT active-lo level 1 11 2 17 > > INT active-lo level 1 14 2 18 > > INT active-lo level 1 9 2 19 > ^ ^^ > > This BIOS is definitaly wrong. It shows your PCI slots as being on the > ISA bus. The INTs themselves show up in 'ISA' notation as oppossed to > 'PCI' notation, but that is probably because mptable believes them to be > ISA (as will the kernel!). Another user reports the same warning, but > no PANIC, I suspect that is an issue of what cards are in which PCI slot... > > Play with different PCI slot positions, try to load a newer BIOS. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39248BD5.2D9F885B>