Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 30 Sep 2017 23:38:45 +0200
From:      Harry Schmalzbauer <freebsd@omnilan.de>
To:        freebsd-stable@freebsd.org
Subject:   Re: panic: Solaris(panic): blkptr invalid CHECKSUM1
Message-ID:  <59D00EE5.7090701@omnilan.de>
In-Reply-To: <59CFD37A.8080009@omnilan.de>
References:  <59CFC6A6.6030600@omnilan.de> <59CFD37A.8080009@omnilan.de>

next in thread | previous in thread | raw e-mail | index | archive | help
 Bezüglich Harry Schmalzbauer's Nachricht vom 30.09.2017 19:25 (localtime):
>  Bezüglich Harry Schmalzbauer's Nachricht vom 30.09.2017 18:30 (localtime):
>>  Bad surprise.
>> Most likely I forgot to stop a PCIe-Passthrough NIC before shutting down
>> that (byhve(8)) guest – jhb@ helped my identifying this as the root
>> cause for sever memory corruptions I regularly had (on stable-11).
>>
>> Now this time, corruption affected ZFS's RAM area, obviously.
>>
>> What I haven't expected is the panic.
>> The machine has memory disk as root, so luckily I still can boot (from
>> ZFS, –> mdpreload rootfs) into single user mode, but early rc stage
>> (most likely mounting ZFS datasets) leads to the following panic:
>>
>> Trying to mount root from ufs:/dev/ufs/cetusROOT []...
>> panic: Solaris(panic): blkptr at 0xfffffe0005b6b000 has invalid CHECKSUM 1
>> cpuid = 1
>> KDB: stack backtrace:
>> #0 0xffffffff805e3837 at kdb_backtrace+0x67
>> #1 0xffffffff805a2286 at vpanic+0x186
>> #2 0xffffffff805a20f3 at panic+0x43
>> #3 0xffffffff81570192 at vcmn_err+0xc2
>> #4 0xffffffff812d7dda at zfs_panic_recover+0x5a
>> #5 0xffffffff812ff49b at zfs_blkptr_verify+0x8b
>> #6 0xffffffff812ff72c at zio_read+0x2c
>> #7 0xffffffff812761de at arc_read+0x6de
>> #8 0xffffffff81298b4d at traverse_prefetch_metadata+0xbd
>> #9 0xffffffff812980ed at traverse_visitbp+0x39d
>> #10 0xffffffff81298c27 at traverse_dnode+0xc7
>> #11 0xffffffff812984a3 at traverse_visitbp+0x753
>> #12 0xffffffff8129788b at traverse_impl+0x22b
>> #13 0xffffffff81297afc at traverse_pool+0x5c
>> #14 0xffffffff812cce06 at spa_load+0x1c06
>> #15 0xffffffff812cc302 at spa_load+0x1102
>> #16 0xffffffff812cac6e at spa_load_best+0x6e
>> #17 0xffffffff812c73a1 at spa_open_common+0x101
>> Uptime: 37s
>> Dumping 1082 out of 15733 MB:..2%..…
>> Dump complete
>> mps0: Sending StopUnit: path (xpt0:mps0:0:2:ffffffff): handle 12
>> mps0: Incrementing SSU count
>> …
>>
>> Haven't done any scrub attempts yet – expectation is to get all datasets
>> of the striped mirror pool back...
>>
>> Any hints highly appreciated.
> Now it seems I'm in really big trouble.
> Regular import doesn't work (also not if booted from cd9660).
> I get all pools listed, but trying to import (unmounted) leads to the
> same panic as initialy reported – because rc is just doning the same.
>
> I booted into single user mode (which works since the bootpool isn't
> affected and root is a memory disk from the bootpool)
> and set vfs.zfs.recover=1.
> But this time I don't even get the list of pools to import 'zpool'
> import instantaniously leads to that panic:
>
> Solaris: WARNING: blkptr at 0xfffffe0005a8e000 has invalid CHECKSUM 1
> Solaris: WARNING: blkptr at 0xfffffe0005a8e000 has invalid COMPRESS 0
> Solaris: WARNING: blkptr at 0xfffffe0005a8e000 DVA 0 has invalid VDEV
> 2337865727
> Solaris: WARNING: blkptr at 0xfffffe0005a8e000 DVA 1 has invalid VDEV
> 289407040
> Solaris: WARNING: blkptr at 0xfffffe0005a8e000 DVA 2 has invalid VDEV
> 3959586324
>
>
> Fatal trap 12: page fault while in kernel mode
> cpuid = 0; apic id = 00
> fault virtual address   = 0x50
> fault code              = supervisor read data, page not present
> instruction pointer     = 0x20:0xffffffff812de904
> stack pointer           = 0x28:0xfffffe043f6bcbc0
> frame pointer           = 0x28:0xfffffe043f6bcbc0
> code segment            = base 0x0, limit 0xfffff, type 0x1b
>                         = DPL 0, pres 1, long 1, def32 0, gran 1
> processor eflags        = interrupt enabled, resume, IOPL = 0
> current process         = 44 (zpool)
> trap number             = 12
> panic: page fault
> cpuid = 0

…

OpenIndiana also panics at regular import.
Unfortunately I don't know the aequivalent of vfs.zfs.recover in OI.

panic[cpu1]/thread=ffffff06dafe8be0: blkptr at ffffff06dbe63000 has
invalid CHECKSUM 1

Warning - stack not written to the dump buffer
ffffff001f67f070 genunix:vcmn_err+42 ()
ffffff001f67f0e0 zfs:zfs_panic_recover+51 ()
ffffff001f67f140 zfs:zfs_blkptr_verify+8d ()
ffffff001f67f220 zfs:zio_read+55 ()
ffffff001f67f310 zfs:arc_read+662 ()
ffffff001f67f370 zfs:traverse_prefetch_metadata+b5 ()
ffffff001f67f450 zfs:traverse_visitbp+1c3 ()
ffffff001f67f4e0 zfs:traverse_dnode+af ()
ffffff001f67f5c0 zfs:traverse_visitbp+6dd ()
ffffff001f67f720 zfs:traverse_impl+1a6 ()
ffffff001f67f830 zfs:traverse_pool+9f ()
ffffff001f67f8a0 zfs:spa_load_verify+1e6 ()
ffffff001f67f990 zfs:spa_load_impl+e1c ()
ffffff001f67fa30 zfs:spa_load+14e ()
ffffff001f67fad0 zfs:spa_load_best+7a ()
ffffff001f67fb90 zfs:spa_import+1b0 ()
ffffff001f67fbe0 zfs:zfs_ioc_pool_import+10f ()
ffffff001f67fc80 zfs:zfsdev_ioctl+4b7 ()
ffffff001f67fcc0 genunix:cdev_ioctl+39 ()
ffffff001f67fd10 specfs:spec_ioctl+60 ()
ffffff001f67fda0 genunix:fop_ioctl+55 ()
ffffff001f67fec0 genunix:ioctl+9b ()
ffffff001f67ff10 unix:brand_sys_sysenter+1c9 ()

This is a important lesson.
My impression was that it's not possible to corrupt a complete pool, but
there's always a way to recover healthy/redundant data.
Now my striped mirror has all 4 devices healthy available, but all
datasets seem to be lost.
No problem for 450G (99,9_%), but there's a 80M dataset which I'm really
missing :-(

Unfortunately I don't know the DVA and blkptr internals, so I won't
write a zfs_fsck(8) soon ;-)

Does it make sense to dump the disks for further analysis?
I need to recreate the pool because I need the machine's resources... :-(
Any help highly appreciated!

-harry



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?59D00EE5.7090701>