Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 23 Aug 1999 14:25:36 -0700 (PDT)
From:      Kevin Lynn <klynn@santacruz.org>
To:        Luiz Morte da Costa Junior <morte@correionet.com.br>
Cc:        freebsd-hackers@freefall.cdrom.com, freebsd-hackers@freebsd.org
Subject:   Re: L440GX+ Server Board
Message-ID:  <Pine.BSF.4.10.9908231424400.984-100000@noc.santacruz.org>
In-Reply-To: <Pine.BSF.4.10.9908231711380.65319-100000@caxton.correionet.com.br>

next in thread | previous in thread | raw e-mail | index | archive | help
Has anyone else gotten this server board to work?

I've got an N440BX and have been considering getting the L440GX+ but
haven't because I don't know if it works..

Kevin

On Mon, 23 Aug 1999, Luiz Morte da Costa Junior wrote:

> 
> Hi list,
> 
> About the problem bellow, I bought a 2940 Adaptec Ultra2 Wide SCSI
> controller, but it didn't work too.
> 
> I wrote to Justin T. Gibbs and he told me that my problem is not SCSI.
> 
> Somebody has any idea?
> 
> []s,
> 
> Luiz Morte da Costa Junior
> Analista de Redes                E-mail: morte@correionet.com.br
> Telefone: +55 19 754-2532        Fax: +55 19 255-7576
> CorreioNet - Correio Popular     Campinas - SP - Brazil
> 
> 
> On Sun, 22 Aug 1999, Luiz Morte da Costa Junior wrote:
> 
> > 
> > Hi all,
> > 
> > I have a problem with a server running a FreeBSD 3.2.
> > 
> > My Server has a L440GX+ Serber Board (intel), with network card 10/100,
> > SCSI AIC 7896 (80MB/s), 2 SCSI disk with 9GB (80MB/s), 2 pentium III
> > 450Mhz (not overclocked). The NIC and SCSI are onboard.
> > 
> > I recompiled a kernel to SMP, and it worked. The server is ok, but when I
> > run a comand with disk access (whith vipw or mysql), the performance of
> > server goes down. My server stays very very very slow. If I use pine to
> > read my messages, it doesn't work. When the comand finishes, the server
> > stays "ok" again.
> > 
> > I recompiled the kernel with "maxusers 128", but it doesn't work.
> > 
> > My SCSI cable has a terminator and the scsi setup is ok (I think :) ).
> > 
> > The dmesg command output is in attchmnt.
> > 
> > I appreciate any help.
> > 
> > []s,
> > 
> > Luiz Morte da Costa Junior
> > Analista de Redes                E-mail: morte@correionet.com.br
> > Telefone: +55 19 754-2532        Fax: +55 19 255-7576
> > CorreioNet - Correio Popular     Campinas - SP - Brazil
> > 
> 
> []s,
> 
> Luiz Morte da Costa Junior
> Analista de Redes                E-mail: morte@correionet.com.br
> Telefone: +55 19 754-2532        Fax: +55 19 255-7576
> CorreioNet - Correio Popular     Campinas - SP - Brazil
> 
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-hackers" in the body of the message
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9908231424400.984-100000>