Date: Sun, 17 Dec 2006 01:06:24 +0900 From: Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> To: Palle Girgensohn <girgen@FreeBSD.org> Cc: questions@FreeBSD.org, obrien@FreeBSD.org Subject: Re: if_nfe on nVidia chipset Message-ID: <45841980.5090100@se.hiroshima-u.ac.jp> In-Reply-To: <92F17ADAEC575CF1EDBE870C@rambutan.pingpong.net> References: <92F17ADAEC575CF1EDBE870C@rambutan.pingpong.net>
next in thread | previous in thread | raw e-mail | index | archive | help
I have the same one. And if_nfe works well on it, in both FreeBSD 6.2-PRERELEASE and 7-CURRENT. Please try to initialize if_nfe using ifconfig command; # ifconfig nfe1 down; ifconfig nfe1 up --- S. Tagashira Palle Girgensohn wrote: > Hi! Sorry for the cross post, I'd love to know if I can get this working > or not. > > Regards, > Palle > > ---------- Forwarded Message ---------- > Date: tisdag, december 12, 2006 18.52.35 +0100 > From: Palle Girgensohn <girgen@FreeBSD.org> > To: hardware@freebsd.org > Subject: if_nfe on Asus M2N-SLI deluxe? > > Hi! > > Does anybody know if if_nfe should work on the above motherboard? I snached > the patch for FreeBSD-6.2 from > <http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html>; and > tried it. The kernel and ifconfig seems happy, but it does not work; > ifconfig reports "active" but ifconfig reports: > > nfe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> > ether 00:17:31:86:aa:31 > media: Ethernet autoselect (none) > status: no carrier > nfe1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> > inet6 fe80::217:31ff:fe86:b4c6%nfe1 prefixlen 64 scopeid 0x4 > inet 192.168.1.191 netmask 0xffffff00 broadcast 192.168.1.255 > ether 00:17:31:86:b4:c6 > media: Ethernet autoselect (none) > status: active > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 > scopeid 0x5 inet 127.0.0.1 netmask 0xff000000 > The media part of nfe1 looks bad, eh? > > Is it supposed to work? How can I help to get it working? > > FreeBSD 6.2-stable, around RC1. Enclosed is a dmesg. Anything else needed? > > /Palle > > > > ---------- End Forwarded Message ---------- > > > > > ------------------------------------------------------------------------ > > Subject: > if_nfe on Asus M2N-SLI deluxe? > From: > Palle Girgensohn <girgen@FreeBSD.org> > Date: > Tue, 12 Dec 2006 18:52:35 +0100 > To: > hardware@freebsd.org > > To: > hardware@freebsd.org > CC: > obrien@freebsd.org > > > Hi! > > Does anybody know if if_nfe should work on the above motherboard? I snached > the patch for FreeBSD-6.2 from > <http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html>; and > tried it. The kernel and ifconfig seems happy, but it does not work; > ifconfig reports "active" but ifconfig reports: > > nfe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> > ether 00:17:31:86:aa:31 > media: Ethernet autoselect (none) > status: no carrier > nfe1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> > inet6 fe80::217:31ff:fe86:b4c6%nfe1 prefixlen 64 scopeid > 0x4 inet 192.168.1.191 netmask 0xffffff00 broadcast 192.168.1.255 > ether 00:17:31:86:b4:c6 > media: Ethernet autoselect (none) > status: active > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 > scopeid 0x5 inet 127.0.0.1 netmask 0xff000000 > The media part of nfe1 looks bad, eh? > > Is it supposed to work? How can I help to get it working? > > FreeBSD 6.2-stable, around RC1. Enclosed is a dmesg. Anything else needed? > > /Palle > > > > ------------------------------------------------------------------------ > > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 6.2-PRERELEASE #0: Wed Nov 29 11:57:06 CET 2006 > girgen@rambutan.pingpong.net:/usr/obj/.a/banan/usr/src/sys/WORKSTATION > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(tm) 64 Processor 3500+ (2210.20-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x40ff2 Stepping = 2 > Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> > Features2=0x2001<SSE3,CX16> > AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> > AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8> > real memory = 2146369536 (2046 MB) > avail memory = 2091245568 (1994 MB) > ACPI APIC Table: <Nvidia AWRDACPI> > ioapic0 <Version 1.1> irqs 0-23 on motherboard > acpi0: <Nvidia AWRDACPI> on motherboard > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi0: Power Button (fixed) > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: <memory, RAM> at device 0.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 1.0 on pci0 > isa0: <ISA bus> on isab0 > pci0: <serial bus, SMBus> at device 1.1 (no driver attached) > pci0: <memory, RAM> at device 1.2 (no driver attached) > ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 2.0 on pci0 > ohci0: [GIANT-LOCKED] > usb0: OHCI version 1.0, legacy support > usb0: SMM does not respond, resetting > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 10 ports with 10 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 2.1 on pci0 > ehci0: [GIANT-LOCKED] > usb1: EHCI version 1.0 > usb1: companion controller, 10 ports each: usb0 > usb1: <EHCI (generic) USB 2.0 controller> on ehci0 > usb1: USB revision 2.0 > uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub1: 10 ports with 10 removable, self powered > atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 4.0 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > atapci1: <nVidia nForce MCP55 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 23 at device 5.0 on pci0 > ata2: <ATA channel 0> on atapci1 > ata3: <ATA channel 1> on atapci1 > atapci2: <nVidia nForce MCP55 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 0xfe02c000-0xfe02cfff irq 20 at device 5.1 on pci0 > ata4: <ATA channel 0> on atapci2 > ata5: <ATA channel 1> on atapci2 > atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb80f mem 0xfe02b000-0xfe02bfff irq 21 at device 5.2 on pci0 > ata6: <ATA channel 0> on atapci3 > ata7: <ATA channel 1> on atapci3 > pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > fxp0: <Intel 82558 Pro/100 Ethernet> port 0xac00-0xac1f mem 0xfdeff000-0xfdefffff,0xfdc00000-0xfdcfffff irq 16 at device 6.0 on pci1 > miibus0: <MII bus> on fxp0 > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > fxp0: Ethernet address: 00:a0:c9:ce:11:26 > fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfddff000-0xfddff7ff,0xfddf8000-0xfddfbfff irq 19 at device 11.0 on pci1 > fwohci0: OHCI version 1.10 (ROM=1) > fwohci0: No. of Isochronous channels is 4. > fwohci0: EUI64 00:11:d8:00:00:c8:2b:85 > fwohci0: Phy 1394a available S400, 2 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > fwe0: <Ethernet over FireWire> on firewire0 > if_fwe0: Fake Ethernet address: 02:11:d8:c8:2b:85 > fwe0: Ethernet address: 02:11:d8:c8:2b:85 > fwe0: if_start running deferred for Giant > sbp0: <SBP-2/SCSI over FireWire> on firewire0 > fwohci0: Initiate bus reset > fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode > firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) > firewire0: bus manager 0 (me) > pci0: <multimedia> at device 6.1 (no driver attached) > nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 23 at device 8.0 on pci0 > miibus1: <MII bus> on nfe0 > e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus1 > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto > nfe0: Ethernet address: 00:17:31:86:aa:31 > nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem 0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq 20 at device 9.0 on pci0 > miibus2: <MII bus> on nfe1 > e1000phy1: <Marvell 88E1116 Gigabit PHY> on miibus2 > e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto > nfe1: Ethernet address: 00:17:31:86:b4:c6 > pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0 > pci5: <ACPI PCI bus> on pcib5 > pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0 > pci6: <ACPI PCI bus> on pcib6 > atapci4: <JMicron JMB363 SATA300 controller> port 0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407,0x9000-0x9003,0x8c00-0x8c0f mem 0xfdafe000-0xfdafffff irq 16 at device 0.0 on pci6 > atapci4: AHCI Version 01.00 controller with 2 ports detected > ata8: <ATA channel 0> on atapci4 > ata9: <ATA channel 1> on atapci4 > ata10: <ATA channel 2> on atapci4 > pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0 > pci7: <ACPI PCI bus> on pcib7 > nvidia0: <GeForce 6200 TurboCache(TM)> mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xfb000000-0xfbffffff irq 16 at device 0.0 on pci7 > nvidia0: [GIANT-LOCKED] > acpi_tz0: <Thermal Zone> on acpi0 > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: [FAST] > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > ppi0: <Parallel I/O> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd67ff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ukbd0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass 3/1 > kbd1 at ukbd0 > uhid0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass 3/1 > ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/18.00, addr 3, iclass 3/1 > ums0: 6 buttons and Z dir. > Timecounter "TSC" frequency 2210201999 Hz quality 800 > Timecounters tick every 0.801 msec > ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging disabled > ad0: 152627MB <Seagate ST3160212A 3.AAJ> at ata0-master UDMA100 > acd0: DVDR <Optiarc DVD RW AD-5170A/1.11> at ata0-slave UDMA66 > cd0 at ata0 bus 0 target 1 lun 0 > cd0: <Optiarc DVD RW AD-5170A 1.11> Removable CD-ROM SCSI-0 device > cd0: 66.000MB/s transfers > cd0: Attempt to query device size failed: NOT READY, Medium not present > Trying to mount root from ufs:/dev/ad0s1a > > > ------------------------------------------------------------------------ > > _______________________________________________ > freebsd-hardware@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45841980.5090100>