Date: Mon, 14 Jan 2002 22:43:35 +0000 From: David Malone <dwmalone@maths.tcd.ie> To: Matthew Dillon <dillon@apollo.backplane.com> Cc: "Robin P. Blanchard" <Robin_Blanchard@gactr.uga.edu>, stable@FreeBSD.ORG Subject: Re: dell 4350 SMP faults Message-ID: <20020114224335.GA13648@maths.tcd.ie> In-Reply-To: <200201142206.g0EM6fa59700@apollo.backplane.com> References: <3C42DBC6.532E932@gactr.uga.edu> <200201142206.g0EM6fa59700@apollo.backplane.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Jan 14, 2002 at 02:06:41PM -0800, Matthew Dillon wrote:
> Robin's tried everything except replacing the machine entirely.
>
> I wonder... is there anyone else on -stable running FreeBSD on
> a DELL 4350 w/ SMP?
We have a 4400 (I think) running -stable which seems to be OK. It
does a lot of NFS serving and some backups, but not much else. Dmesg
included below, incase it is useful to Robin. The machine seems
stable enough (no crashes yet, up for 38 days). We're still having
problems with our 2550s and the bge driver. Do 4350s have a bge
type card?
David.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-STABLE #3: Fri Dec 7 19:23:33 GMT 2001
iedowse@temp2.maths.tcd.ie:/mnt/obj/usr/src/sys/MACCULLAGH
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (993.33-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073733632 (1048568K bytes)
avail memory = 1041604608 (1017192K bytes)
Changing APIC ID for IO APIC #0 from 0 to 2 on chip
Changing APIC ID for IO APIC #1 from 0 to 3 on chip
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc03b5000.
ccd0-3: Concatenated disk drivers
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 13 entries at 0xc00fc1e0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 0 -> irq 2
pci0: <PCI bus> on pcib0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfcc0-0xfcff mem 0xfe900000-0xfe9fffff,0xfeb02000-0xfeb02fff irq 2 at device 4.0 on pci0
fxp0: Ethernet address 00:b0:d0:ea:00:ac
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <ATI model 4759 graphics accelerator> at 6.0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> mem 0xfeb00000-0xfeb00fff irq 11 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 6 -> irq 5
pci1: <PCI bus> on pcib1
wx0: <Intel PRO/1000 T Gigabit Ethernet> mem 0xfcf20000-0xfcf2ffff,0xfcf00000-0xfcf1ffff irq 5 at device 8.0 on pci1
miibus1: <MII bus> on wx0
e1000phy0: <Marvell Semiconductor 88E1000* gigabit PHY> on miibus1
e1000phy0: 1000baseTX-FDX, 100baseTX-FDX, 100baseTX, 10baseTX-FDX, 10baseTX, auto
wx0: Ethernet address 00:03:47:72:9c:c5
pcib6: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 15 -> irq 10
pci6: <PCI bus> on pcib6
pcib2: <PCI to PCI bridge (vendor=8086 device=0962)> at device 4.0 on pci6
IOAPIC #1 intpin 8 -> irq 13
IOAPIC #1 intpin 9 -> irq 14
pci7: <PCI bus> on pcib2
pci7: <unknown card> (vendor=0x9005, dev=0x00c5) at 4.0 irq 10
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xc800-0xc8ff mem 0xfbcfe000-0xfbcfefff irq 13 at device 4.1 on pci7
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7880 Ultra SCSI adapter> port 0xc400-0xc4ff mem 0xfbcfd000-0xfbcfdfff irq 14 at device 6.0 on pci7
aic7880: Ultra Single Channel A, SCSI Id=7, 16/255 SCBs
aac0: <Dell PERC 3/Di> mem 0xf0000000-0xf7ffffff irq 10 at device 4.1 on pci6
aac0: i960RX 100MHz, 118MB cache memory, optional battery present
aac0: Kernel 2.5-0, Build 2991, S/N 9c10d1
pcib8: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 4 -> irq 16
IOAPIC #1 intpin 11 -> irq 17
pci8: <PCI bus> on pcib8
ahc2: <Adaptec 3960D Ultra160 SCSI adapter> port 0xbc00-0xbcff mem 0xeff01000-0xeff01fff irq 16 at device 6.0 on pci8
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc3: <Adaptec 3960D Ultra160 SCSI adapter> port 0xb800-0xb8ff mem 0xeff00000-0xeff00fff irq 17 at device 6.1 on pci8
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255 SCBs
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
IPFW: MOD_LOAD
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, unlimited logging
Waiting 5 seconds for SCSI devices to settle
aacd0: <RAID 5> on aac0
aacd0: 12288MB (25165824 sectors)
aacd1: <RAID 5> on aac0
aacd1: 267706MB (548262400 sectors)
aacd2: <Volume> on aac0
aacd2: 34731MB (71130752 sectors)
SMP: AP CPU #1 Launched!
sa0 at ahc2 bus 0 target 6 lun 0
sa0: <HP Ultrium 1-SCSI E16V> Removable Sequential Access SCSI-3 device
sa0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit)
Mounting root from ufs:/dev/aacd0s1a
cd0 at ahc1 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:466 1.07> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020114224335.GA13648>