Date: Thu, 24 Feb 2005 10:12:54 +0100 From: "Daniel S. Haischt" <me@daniel.stefan.haischt.name> To: Robert Fitzpatrick <robert@webtent.com> Cc: FreeBSD <freebsd-questions@freebsd.org> Subject: Re: clamd after upgrade to 0.83 Message-ID: <421D9A96.8040609@daniel.stefan.haischt.name> In-Reply-To: <FAA3386A7C82397ED78862DD@[192.168.1.57]> References: <7177EE1A5FAAB03DADCD41D2@[192.168.1.57]> <421CDAF1.2010805@daniel.stefan.haischt.name> <FBC6FB6D287AB01375CEE198@[192.168.1.57]> <421CE34A.8070908@daniel.stefan.haischt.name> <FAA3386A7C82397ED78862DD@[192.168.1.57]>
next in thread | previous in thread | raw e-mail | index | archive | help
The status request simply fails because in /etc/rc.subr ...
status)
if [ -n "$rc_pid" ]; then
echo "${name} is running as pid $rc_pid."
else
echo "${name} is not running."
return 1
fi
;;
there's only a check whether the pid specified in ...
/usr/local/etc/clamav-clamd.sh
... exists.
Two things you can test:
If you are running ClamAV in UNIX domain socket mode,
there must be an appropriate UNIX domain socket file
somewhere, because Amavis tries to connect to the ClamAV
daemon using this socket. Usually this socket is specified
in 'clamd.conf'.
I would say if there's not such a socket file, your
ClamAV daemon is quiete unusable because nobody is able
to connect to the daemon instance.
If you are running ClamAV in TCP/IP mode you can do the
telnet test again. The TCP/IP port ClamAV listens to is
specified in 'clamd.conf' as well.
Finally try running /usr/local/sbin/clamd manually from
the command line to see whether it spits out some error
messages ...
Robert Fitzpatrick schrieb:
> Thanks, that explains why postfix is still logging. But clamd is running...
>
> esmtp# ps -ax | grep clam
> 26441 ?? Ss 0:00.37 /usr/local/sbin/clamd
> 26467 ?? Is 0:00.00 /usr/local/bin/freshclam --daemon
> 26494 ?? Is 0:00.00 /usr/local/bin/freshclam --daemon
>
> But still the server thinks it is not and there is no pid file...
>
> esmtp# /usr/local/etc/rc.d/clamav-clamd.sh status
> clamav_clamd is not running.
> esmtp# ls -la /var/run/clamav/
> total 4
> drwxr-xr-x 2 clamav clamav 512 Feb 23 21:51 .
> drwxr-xr-x 6 root wheel 512 Feb 23 21:51 ..
> esmtp#
>
> I even uninstalled and re-installed. Any ideas why this is not reporting
> as running?
>
> --
> Robert
>
>
> --On Wednesday, February 23, 2005 9:10 PM +0100 "Daniel S. Haischt"
> <me@daniel.stefan.haischt.name> wrote:
>
>> I think the following section in /usr/local/amavisd.conf
>> should answer your question:
>>
>> ### http://www.clamav.net/ - backs up clamd or Mail::ClamAV
>> ['ClamAV-clamscan', 'clamscan',
>> "--stdout --disable-summary -r --tempdir=$TEMPBASE {}", [0], [1],
>> qr/^.*?: (?!Infected Archive)(.*) FOUND$/ ],
>>
>> Basically if clamd is not running Amavis will execute the
>> commandline scanner version of ClamAV. That's the reason why
>> you are still getting log entries.
>>
>> So to sumarize: ClamAV's daemon is not running, thus
>> there is neither a PID file nor a UNIX domain socket.
>>
>> So if you want to use the daemonized version of ClamAV,
>> you need to elaborate why the daemon isn't started.
>>
>> Robert Fitzpatrick schrieb:
>>
>>> I do not have anything in /var/run/clamav and that is the location in
>>> clamd.conf for placing the PID file. I cannot connect to the localhost
>>> as well:
>>>
>>> esmtp# telnet localhost 3310
>>> Trying ::1...
>>> telnet: connect to address ::1: Connection refused
>>> Trying 127.0.0.1...
>>> telnet: connect to address 127.0.0.1: Connection refused
>>> telnet: Unable to connect to remote host
>>>
>>> However, according to the clamd.log, clamav is intercepting viruses. Do
>>> you think it is working and why would I not be able to connect via
>>> telnet or view the pid file if it is?
>>>
>>> --
>>> Robert
>>>
>>>
>>> --On Wednesday, February 23, 2005 8:35 PM +0100 "Daniel S. Haischt"
>>> <me@daniel.stefan.haischt.name> wrote:
>>>
>>>> Usually if you are running ClamAV in UNI domain socket mode,
>>>> there should be a UNIX domain socket called 'clamd' in ...
>>>>
>>>> -> /var/run/clamav
>>>>
>>>> Tho - this file can be configured in /usr/local/etc/clamd.conf.
>>>>
>>>> If ClamAv is running in TCP/IP mode it should be possible to
>>>> test whether the server is responding by connecting to its
>>>> TCP/IP port using a telnet client ...
>>>>
>>>> -> telnet localhost 3310
>>>>
>>>> Robert Fitzpatrick schrieb:
>>>>
>>>>> After doing a portupgrade of clamd from 0.81 to 0.83, the service
>>>>> reports that it is not running using 'clamav-clamd.sh status'.
>>>>>
>>>>> esmtp# cd /usr/local/etc
>>>>> esmtp# rc.d/clamav-clamd.sh status
>>>>> clamav_clamd is not running.
>>>>> esmtp# ps -ax|grep clam
>>>>> 781 ?? Ss 0:10.96 /usr/local/sbin/clamd
>>>>>
>>>>> However, all seems to be fine, postfix 2.1.5, amavisd-new and clamd
>>>>> all
>>>>> seem to be running and Webmin reports them all as running.
>>>>>
>>>>> Any thoughts or something I should know regarding the upgrading? I
>>>>> checked /usr/ports/UPDATING, but nothing regarding this. All conf
>>>>> files
>>>>> are reflecting the new settings.
>>>>>
>>>>> --
>>>>> Robert
>>>>>
>>>>> _______________________________________________
>>>>> freebsd-questions@freebsd.org mailing list
>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>>>> To unsubscribe, send any mail to
>>>>> "freebsd-questions-unsubscribe@freebsd.org"
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> freebsd-questions@freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>> To unsubscribe, send any mail to
>>> "freebsd-questions-unsubscribe@freebsd.org"
>
>
>
>
>
>
--
Mit freundlichen Gruessen / With kind regards
DAn.I.El S. Haischt
Want a complete signature??? Type at a shell prompt:
$ > finger -l haischt@daniel.stefan.haischt.name
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?421D9A96.8040609>