Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 16 Oct 1998 13:54:25 -0700 (PDT)
From:      Doug White <dwhite@resnet.uoregon.edu>
To:        Joe Abley <jabley@clear.co.nz>
Cc:        freebsd-questions@FreeBSD.ORG, freebsd-current@FreeBSD.ORG
Subject:   Re: Luigi's Sound Drivers on Digital PC5000
Message-ID:  <Pine.BSF.4.03.9810161352380.28399-100000@resnet.uoregon.edu>
In-Reply-To: <19981016095632.A25175@clear.co.nz>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 16 Oct 1998, Joe Abley wrote:

> I am running FreeBSD 3.0-BETA, CVSUPped a few days ago, on a P2
> Digital PC5000 with some kind of (supposedly sb16- and wss-compatible)
> on-board audio.

ok.

> I have the following in my kernel config:
> 
> controller      pnp0
> device          pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0 vector pcmintr

ok.

> I get the following on boot:
> 
> ...
> Probing for PnP devices:
> CSN 1 Vendor ID: CSC0735 [0x3507630e] Serial 0xffffffff Comp ID: @@@0000 [0x0000
> 0000]
> This is a CS4236, but LDN 0 is disabled
> Probing for devices on the ISA bus:
> sc0 at 0x60-0x6f irq 1 on motherboard
> sc0: VGA color <16 virtual consoles, flags=0x0>
> pcm0 not found
> ...
> 
> What is LDN 0? Why is it disabled?

LDN is Logical Device Number, it's a PNP thing.

You can do one of these two:

1.  Go into the BIOS Setup and Set PnP OS to No.

.OR.


2. Boot -c and type at the config> prompt:

pnp 1 0 os enable port0 0x530 irq0 5 drq0 1 drq1 3

quit and your card should come up.  Change the resources if necessary.

Doug White                               
Internet:  dwhite@resnet.uoregon.edu    | FreeBSD: The Power to Serve
http://gladstone.uoregon.edu/~dwhite    | www.freebsd.org


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.03.9810161352380.28399-100000>