Date: 11 Sep 2001 13:34:38 +0900 From: NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp> To: Mitsuru IWASAKI <iwasaki@jp.FreeBSD.org> Cc: acpi-jp@jp.FreeBSD.org, current@freebsd.org Subject: Re: ACPI kills my current-box frequently. Message-ID: <87ae02tkf5.fsf@boggy.acest.tutrp.tut.ac.jp> In-Reply-To: <87d74ytkpx.fsf@boggy.acest.tutrp.tut.ac.jp> (NAKAJI Hiroyuki's message of "11 Sep 2001 13:28:10 %2B0900") References: <87u1ycist7.fsf@boggy.acest.tutrp.tut.ac.jp> <20010911.011913.71083688.iwasaki@jp.FreeBSD.org> <87d74ytkpx.fsf@boggy.acest.tutrp.tut.ac.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
Oops.
>>>>> In <87d74ytkpx.fsf@boggy.acest.tutrp.tut.ac.jp>
>>>>> NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp> wrote:
HN> Dmesgs with and without acpi are attached below.
===> with acpi.ko loaded
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #12: Sat Sep 8 16:56:16 JST 2001
root@boggy.acest.tutrp.tut.ac.jp:/usr/obj/usr/src/sys/NAKAJI
Calibrating clock(s) ... TSC clock: 936722721 Hz, i8254 clock: 1193160 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (936.75-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 671072256 (655344K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x004fa000 - 0x27ff3fff, 665821184 bytes (162554 pages)
avail memory = 647581696 (632404K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f92a0
bios32: Entry = 0xf0690 (c00f0690) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x890
pnpbios: Found PnP BIOS data at 0xc00fc260
pnpbios: Entry = f0000:c290 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc04d4000.
Preloaded elf module "acpi.ko" at 0xc04d40a8.
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106)
Using $PIR table, 8 entries at 0xc00f0e60
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P3V_4X > on motherboard
acpi0: power button is handled as a fixed feature programming model.
acpi_button0: <Power Button> on acpi0
fdc0: <NEC 72065B or clone> port 0x3f7,0x3f2-0x3f5 irq 6 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP/ECP_RLE/NIBBLE_ID/ECP_ID/ECP_RLE_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: <EPSON LP-8400PS3> PRINTER POSTSCRIPT
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc1: cannot reserve I/O port range
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd1: unable to allocate IRQ
psm0: unable to allocate IRQ
atkbd1: unable to allocate IRQ
psm0: current command byte:0047
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:00, syncbits:00
psmcpnp0 irq 12 on acpi0
ppc1: cannot reserve I/O port range
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
map[10]: type 3, range 32, base e4000000, size 26, enabled
found-> vendor=0x1106, dev=0x0691, revid=0xc2
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x8598, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x1106, dev=0x0596, revid=0x12
bus=0, slot=4, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000b800, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=4, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000b400, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x08
bus=0, slot=4, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=5
found-> vendor=0x1106, dev=0x3050, revid=0x20
bus=0, slot=4, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
map[10]: type 4, range 32, base 0000b000, size 7, enabled
map[14]: type 1, range 32, base e1800000, size 7, enabled
found-> vendor=0x10b7, dev=0x9055, revid=0x30
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=5
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e1000000, size 12, enabled
map[14]: type 1, range 32, base e0800000, size 20, enabled
found-> vendor=0x1013, dev=0x6003, revid=0x01
bus=0, slot=11, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000a800, size 8, enabled
map[14]: type 1, range 64, base e0000000, size 12, enabled
found-> vendor=0x9005, dev=0x0010, revid=0x00
bus=0, slot=12, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000a400, size 3, enabled
map[14]: type 4, range 32, base 0000a000, size 2, enabled
map[18]: type 4, range 32, base 00009800, size 3, enabled
map[1c]: type 4, range 32, base 00009400, size 2, enabled
map[20]: type 4, range 32, base 00009000, size 8, enabled
found-> vendor=0x1103, dev=0x0004, revid=0x03
bus=0, slot=13, func=0
class=01-80-00, hdrtype=0x00, mfdev=0
intpin=a, irq=5
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xe2000000-0xe2dfffff
pcib1: prefetched decode 0xe2f00000-0xe3ffffff
pci1: physical bus=1
map[10]: type 3, range 32, base e3000000, size 24, enabled
map[14]: type 4, range 32, base 0000d800, size 8, enabled
map[18]: type 1, range 32, base e2000000, size 12, enabled
found-> vendor=0x1002, dev=0x475a, revid=0x7a
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 ATA66 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xb800
ata0: mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=50
ata0-master: ATA probe 01 a5
ata0-slave: ATA probe 01 a5
ata0: devices=03
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xb808
ata1: mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI probe 14 eb
ata1-slave: ATAPI probe 00 00
ata1: mask=03 stat0=10 stat1=50
ata1-slave: ATA probe 01 a5
ata1: devices=06
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 5 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xb000-0xb07f mem 0xe1800000-0xe180007f irq 5 at device 9.0 on pci0
xl0: Ethernet address: 00:01:02:c2:15:af
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0xe0800000-0xe08fffff,0xe1000000-0xe1000fff irq 10 at device 11.0 on pci0
csa: card is Unknown/invalid SSID (CS4614)
pcm0: <CS461x PCM Audio> on csa0
pcm0: ac97 codec id 0x43525913 (Cirrus Logic CS4297A)
pcm0: ac97 codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Crystal Semi 3D Stereo Enhancement
pcm0: ac97 primary codec extended features AMAP
pcm: setmap 5bb000, 1000; 0xc2067000 -> 5bb000
pcm: setmap 5bd000, 1000; 0xc2069000 -> 5bd000
ahc0: <Adaptec 2940 Ultra2 SCSI adapter (OEM)> port 0xa800-0xa8ff mem 0xe0000000-0xe0000fff irq 11 at device 12.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 422 instructions downloaded
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs
atapci1: <HighPoint HPT370 ATA100 controller> port 0x9000-0x90ff,0x9400-0x9403,0x9800-0x9807,0xa000-0xa003,0xa400-0xa407 irq 5 at device 13.0 on pci0
ata-: ata2 already exists, using ata3 instead
ata2: iobase=0xa400 altiobase=0xa002 bmaddr=0x9000
ata2: mask=03 ostat0=50 ostat2=00
ata2-master: ATAPI probe 00 00
ata2-slave: ATAPI probe 00 00
ata2: mask=03 stat0=50 stat1=00
ata2-master: ATA probe 01 a5
ata2: devices=01
ata2: at 0xa400 on atapci1
ata3: iobase=0x9800 altiobase=0x9402 bmaddr=0x9008
ata3: mask=03 ostat0=50 ostat2=00
ata3-master: ATAPI probe 00 00
ata3-slave: ATAPI probe 00 00
ata3: mask=03 stat0=50 stat1=00
ata3-master: ATA probe 01 a5
ata3: devices=01
ata3: at 0x9800 on atapci1
ata-: ata0 already exists, using ata4 instead
ata-: ata1 already exists, using ata5 instead
atkbdc-: atkbdc0 already exists, using atkbdc1 instead
fdc-: fdc0 already exists, using fdc1 instead
ppc-: ppc0 already exists, using ppc1 instead
ppc-: ppc1 already exists, using ppc2 instead
sio-: sio0 already exists, using sio2 instead
sio-: sio1 already exists, using sio3 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
ata4 failed to probe at port 0x1f0 irq 14 on isa0
ata5 failed to probe at port 0x170 irq 15 on isa0
atkbdc1: <Keyboard controller (i8042)> failed to probe at port 0x60 on isa0
bt0 failed to probe on isa0
fdc1: cannot reserve I/O port range (6 ports)
fdc1 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc1: parallel port found at 0x378
ppc1: cannot reserve I/O port range
ppc1: <Parallel port> failed to probe at port 0x378-0x37f irq 7 on isa0
ppc2: parallel port found at 0x278
ppc2: using extended I/O port range
ppc2: ECP SPP ECP+EPP SPP
ppc2: <Parallel port> at port 0x278-0x27f irq 5 on isa0
ppc2: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc2: FIFO with 16/16/15 bytes threshold
plip-: plip0 already exists, using plip1 instead
lpt-: lpt0 already exists, using lpt1 instead
ppi-: ppi0 already exists, using ppi1 instead
plip1: <PLIP network interface> on ppbus1
bpf: lp1 attached
lpt1: <Printer> on ppbus1
lpt1: Interrupt-driven port
ppi1: <Parallel I/O> on ppbus1
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio3 failed to probe at port 0x2f8 irq 3 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
sc1: no video adapter found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:026b7f3f 0..619=620 cylinders, 0..127=128 heads, 1..63=63 sectors
1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
2:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
3:0082fe3f 0..130=131 cylinders, 0..254=255 heads, 1..63=63 sectors
4:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
5:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
6:0104fe3f 0..260=261 cylinders, 0..254=255 heads, 1..63=63 sectors
7:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: faith0 attached
bpf: lo0 attached
bpf: ppp0 attached
ad0: success setting WDMA2 on VIA chip
Creating DISK ad0
ad0: <WDC AC32500H/24.09P07> ATA-0 disk at ata0-master
ad0: 2441MB (4999680 sectors), 4960 C, 16 H, 63 S, 512 B
ad0: 1 secs/int, 1 depth queue, WDMA2
ad0: piomode=4 dmamode=2 udmamode=-1 cblid=0
ad1: success setting UDMA4 on VIA chip
Creating DISK ad1
ad1: <Maxtor 31536U2/BAC51NJ0> ATA-6 disk at ata0-slave
ad1: 14655MB (30015216 sectors), 29777 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA66
ad1: piomode=4 dmamode=2 udmamode=4 cblid=1
ad3: success setting UDMA2 on VIA chip
Creating DISK ad3
ad3: <FUJITSU MPC3102AT E/6207> ATA-3 disk at ata1-slave
ad3: 9765MB (20000536 sectors), 19841 C, 16 H, 63 S, 512 B
ad3: 16 secs/int, 1 depth queue, UDMA33
ad3: piomode=4 dmamode=2 udmamode=2 cblid=0
ad4: success setting UDMA5 on HighPoint chip
Creating DISK ad4
ad6: success setting UDMA5 on HighPoint chip
Creating DISK ad6
ar0: 43979MB <ATA RAID1 array> [5606/255/63] subdisks:
ad4: <IBM-DTLA-307045/TX6OA60A> ATA-5 disk at ata2-master
ad4: 43979MB (90069840 sectors), 89355 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA100
ad4: piomode=4 dmamode=2 udmamode=5 cblid=1
ad6: <IBM-DTLA-307045/TX6OA60A> ATA-5 disk at ata3-master
ad6: 43979MB (90069840 sectors), 89355 C, 16 H, 63 S, 512 B
ad6: 16 secs/int, 1 depth queue, UDMA100
ad6: piomode=4 dmamode=2 udmamode=5 cblid=1
Creating DISK ar0
ata1-master: piomode=3 dmamode=1 udmamode=-1 dmaflag=1
ata1-master: success setting PIO3 on generic chip
acd0: <TOSHIBA CD-ROM XM-5602B/1796> CDROM drive at ata1 as master
acd0: read 1377KB/s (32754KB/s), 256KB buffer, PIO3
acd0: Reads: CD-R, CD-DA
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(probe0:ahc0:0:0:0): Retrying Command
(probe3:ahc0:0:3:0): Retrying Command
(probe4:ahc0:0:4:0): Retrying Command
(probe5:ahc0:0:5:0): Retrying Command
(probe6:ahc0:0:6:0): Retrying Command
(probe5:ahc0:0:5:0): error 22
(probe5:ahc0:0:5:0): Unretryable Error
(ahc0:A:0:0): Sending SDTR period c, offset 7f
(ahc0:A:0:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
ahc0: target 0 synchronous at 10.0MHz, offset = 0xf
(ahc0:A:3:0): Sending WDTR 1
(ahc0:A:3:0): Received WDTR 1 filtered to 1
ahc0: target 3 using 16bit transfers
(ahc0:A:3:0): Sending SDTR period a, offset 7f
(ahc0:A:3:0): Received SDTR period a, offset 3f
Filtered to period a, offset 3f
ahc0: target 3 synchronous at 40.0MHz, offset = 0x3f
(ahc0:A:4:0): Sending WDTR 1
(ahc0:A:4:0): Received WDTR 1 filtered to 1
ahc0: target 4 using 16bit transfers
(ahc0:A:4:0): Sending SDTR period a, offset 7f
(ahc0:A:4:0): Received SDTR period a, offset 3f
Filtered to period a, offset 3f
ahc0: target 4 synchronous at 40.0MHz, offset = 0x3f
(ahc0:A:6:0): Sending SDTR period c, offset 7f
(ahc0:A:6:0): Received SDTR period c, offset f
Filtered to period c, offset f
ahc0: target 6 synchronous at 20.0MHz, offset = 0xf
Creating DISK da0
Creating DISK da1
Creating DISK da2
Creating DISK da3
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <IBM DPES-31080 S31Q> Fixed Direct Access SCSI-2 device
pass0: Serial Number 2C602798
pass0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
pass1 at ahc0 bus 0 target 3 lun 0
pass1: <IBM DPSS-318350N S96H> Fixed Direct Access SCSI-3 device
pass1: Serial Number ZE1FY518
pass1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
pass2 at ahc0 bus 0 target 4 lun 0
pass2: <IBM DPSS-318350N S96H> Fixed Direct Access SCSI-3 device
pass2: Serial Number ZE1G7243
pass2: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
pass3 at ahc0 bus 0 target 5 lun 0
pass3: <COMPAQ CD-ROM CR-503BCQ 1.1i> Removable CD-ROM SCSI-2 device
pass3: 3.300MB/s transfers
pass4 at ahc0 bus 0 target 6 lun 0
pass4: <QUANTUM FIREBALL SE2.1S PJ09> Fixed Direct Access SCSI-2 device
pass4: Serial Number 632731429223
pass4: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
Creating DISK cd0
Mounting root from ufs:/dev/ad0s3a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DPES-31080 S31Q> Fixed Direct Access SCSI-2 device
da0: Serial Number 2C602798
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 1034MB (2118144 512 byte sectors: 255H 63S/T 131C)
da1 at ahc0 bus 0 target 3 lun 0
da1: <IBM DPSS-318350N S96H> Fixed Direct Access SCSI-3 device
da1: Serial Number ZE1FY518
da1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da2 at ahc0 bus 0 target 4 lun 0
da2: <IBM DPSS-318350N S96H> Fixed Direct Access SCSI-3 device
da2: Serial Number ZE1G7243
da2: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da2: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da3 at ahc0 bus 0 target 6 lun 0
da3: <QUANTUM FIREBALL SE2.1S PJ09> Fixed Direct Access SCSI-2 device
da3: Serial Number 632731429223
da3: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da3: 2051MB (4201304 512 byte sectors: 255H 63S/T 261C)
(cd0:ahc0:0:5:0): error 6
(cd0:ahc0:0:5:0): Unretryable Error
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <COMPAQ CD-ROM CR-503BCQ 1.1i> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ad0s1: type 0xb, start 63, end = 4193279, size 4193217 : OK
ad0s2: type 0x5, start 4193280, end = 4249727, size 56448 : OK
ad0s3: type 0xa5, start 4249728, end = 4999679, size 749952 : OK
ad0s5: type 0x4, start 4193343, end = 4249727, size 56385 : OK
start_init: trying /sbin/init
ad1s1: type 0xa5, start 63, end = 30015215, size 30015153 : OK
da3s1: type 0x5, start 16065, end = 2474009, size 2457945 : OK
da3s2: type 0xa5, start 2474010, end = 4192964, size 1718955 : OK
da3s5: type 0xb, start 16128, end = 2474009, size 2457882 : OK
ad3s1: type 0xa5, start 63, end = 19999727, size 19999665 : OK
ad3s1: type 0xa5, start 63, end = 19999727, size 19999665 : OK
ad3s1: type 0xa5, start 63, end = 19999727, size 19999665 : OK
ad3s1: type 0xa5, start 63, end = 19999727, size 19999665 : OK
da3s1: type 0x5, start 16065, end = 2474009, size 2457945 : OK
da3s2: type 0xa5, start 2474010, end = 4192964, size 1718955 : OK
da3s5: type 0xb, start 16128, end = 2474009, size 2457882 : OK
da0s1: type 0xa5, start 63, end = 2104514, size 2104452 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 2104514, size 2104452 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
ar0s1: type 0xa5, start 63, end = 90060389, size 90060327 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
ar0s1: type 0xa5, start 63, end = 90060389, size 90060327 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da3s1: type 0x5, start 16065, end = 2474009, size 2457945 : OK
da3s2: type 0xa5, start 2474010, end = 4192964, size 1718955 : OK
da3s5: type 0xb, start 16128, end = 2474009, size 2457882 : OK
ad3s1: type 0xa5, start 63, end = 19999727, size 19999665 : OK
da0s1: type 0xa5, start 63, end = 2104514, size 2104452 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
ar0s1: type 0xa5, start 63, end = 90060389, size 90060327 : OK
Linux ELF exec handler installed
lpt0: switched to polled standard mode
link_elf: symbol linux_ioctl_register_handler undefined
===> without acpi.ko loaded
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #12: Sat Sep 8 16:56:16 JST 2001
root@boggy.acest.tutrp.tut.ac.jp:/usr/obj/usr/src/sys/NAKAJI
Calibrating clock(s) ... TSC clock: 936720050 Hz, i8254 clock: 1193157 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (936.75-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 671072256 (655344K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x004ba000 - 0x27ff3fff, 666083328 bytes (162618 pages)
avail memory = 647843840 (632660K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f92a0
bios32: Entry = 0xf0690 (c00f0690) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x890
pnpbios: Found PnP BIOS data at 0xc00fc260
pnpbios: Entry = f0000:c290 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc0494000.
random: <entropy source>
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106)
Using $PIR table, 8 entries at 0xc00f0e60
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
map[10]: type 3, range 32, base e4000000, size 26, enabled
found-> vendor=0x1106, dev=0x0691, revid=0xc2
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x8598, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x1106, dev=0x0596, revid=0x12
bus=0, slot=4, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000b800, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=4, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000b400, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x08
bus=0, slot=4, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=5
found-> vendor=0x1106, dev=0x3050, revid=0x20
bus=0, slot=4, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
map[10]: type 4, range 32, base 0000b000, size 7, enabled
map[14]: type 1, range 32, base e1800000, size 7, enabled
found-> vendor=0x10b7, dev=0x9055, revid=0x30
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=5
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e1000000, size 12, enabled
map[14]: type 1, range 32, base e0800000, size 20, enabled
found-> vendor=0x1013, dev=0x6003, revid=0x01
bus=0, slot=11, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000a800, size 8, enabled
map[14]: type 1, range 64, base e0000000, size 12, enabled
found-> vendor=0x9005, dev=0x0010, revid=0x00
bus=0, slot=12, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000a400, size 3, enabled
map[14]: type 4, range 32, base 0000a000, size 2, enabled
map[18]: type 4, range 32, base 00009800, size 3, enabled
map[1c]: type 4, range 32, base 00009400, size 2, enabled
map[20]: type 4, range 32, base 00009000, size 8, enabled
found-> vendor=0x1103, dev=0x0004, revid=0x03
bus=0, slot=13, func=0
class=01-80-00, hdrtype=0x00, mfdev=0
intpin=a, irq=5
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xe2000000-0xe2dfffff
pcib1: prefetched decode 0xe2f00000-0xe3ffffff
pci1: physical bus=1
map[10]: type 3, range 32, base e3000000, size 24, enabled
map[14]: type 4, range 32, base 0000d800, size 8, enabled
map[18]: type 1, range 32, base e2000000, size 12, enabled
found-> vendor=0x1002, dev=0x475a, revid=0x7a
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 ATA66 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xb800
ata0: mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=50
ata0-master: ATA probe 01 a5
ata0-slave: ATA probe 01 a5
ata0: devices=03
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xb808
ata1: mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI probe 14 eb
ata1-slave: ATAPI probe 00 00
ata1: mask=03 stat0=10 stat1=50
ata1-slave: ATA probe 01 a5
ata1: devices=06
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 5 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xb000-0xb07f mem 0xe1800000-0xe180007f irq 5 at device 9.0 on pci0
xl0: Ethernet address: 00:01:02:c2:15:af
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0xe0800000-0xe08fffff,0xe1000000-0xe1000fff irq 10 at device 11.0 on pci0
csa: card is Unknown/invalid SSID (CS4614)
pcm0: <CS461x PCM Audio> on csa0
pcm0: ac97 codec id 0x43525913 (Cirrus Logic CS4297A)
pcm0: ac97 codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Crystal Semi 3D Stereo Enhancement
pcm0: ac97 primary codec extended features AMAP
pcm: setmap 534000, 1000; 0xc2040000 -> 534000
pcm: setmap 556000, 1000; 0xc2042000 -> 556000
ahc0: <Adaptec 2940 Ultra2 SCSI adapter (OEM)> port 0xa800-0xa8ff mem 0xe0000000-0xe0000fff irq 11 at device 12.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 422 instructions downloaded
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs
atapci1: <HighPoint HPT370 ATA100 controller> port 0x9000-0x90ff,0x9400-0x9403,0x9800-0x9807,0xa000-0xa003,0xa400-0xa407 irq 5 at device 13.0 on pci0
ata-: ata2 already exists, using ata3 instead
ata2: iobase=0xa400 altiobase=0xa002 bmaddr=0x9000
ata2: mask=03 ostat0=50 ostat2=00
ata2-master: ATAPI probe 00 00
ata2-slave: ATAPI probe 00 00
ata2: mask=03 stat0=50 stat1=00
ata2-master: ATA probe 01 a5
ata2: devices=01
ata2: at 0xa400 on atapci1
ata3: iobase=0x9800 altiobase=0x9402 bmaddr=0x9008
ata3: mask=03 ostat0=50 ostat2=00
ata3-master: ATAPI probe 00 00
ata3-slave: ATAPI probe 00 00
ata3: mask=03 stat0=50 stat1=00
ata3-master: ATA probe 01 a5
ata3: devices=01
ata3: at 0x9800 on atapci1
ata-: ata0 already exists, using ata4 instead
ata-: ata1 already exists, using ata5 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 15 devices, largest 114 bytes
PNP0401: adding dma mask 0x8
PNP0401: adding irq mask 0x80
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0
pnpbios: handle 1 device ID PNP0401 (0104d041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 2 device ID PNP0501 (0105d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 3 device ID PNP0501 (0105d041)
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0
pnpbios: handle 4 device ID PNP0700 (0007d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 5 device ID PNP0f13 (130fd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0x100000-0x27ffffff, size=0x27f00000
PNP0c01: adding fixed memory32 range 0xe8000-0xeffff, size=0x8000
PNP0c01: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c01: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c01: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000
PNP0c01: adding fixed memory32 range 0xd3400-0xd3fff, size=0xc00
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
pnpbios: handle 6 device ID PNP0c01 (010cd041)
PNP0000: adding irq mask 0x4
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
PNP0000: adding io range 0x4d0-0x4d1, size=0x2, align=0
pnpbios: handle 7 device ID PNP0000 (0000d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 8 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x75, size=0x6, align=0
pnpbios: handle 9 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 10 device ID PNP0303 (0303d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xf0, size=0x1, align=0
pnpbios: handle 11 device ID PNP0c04 (040cd041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x80-0x90, size=0x11, align=0
PNP0200: adding io range 0x94-0x9f, size=0xc, align=0
PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0
pnpbios: handle 12 device ID PNP0200 (0002d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 13 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 14 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0xe400-0xe47f, size=0x80, align=0
PNP0c02: adding io range 0xe800-0xe83f, size=0x40, align=0
pnpbios: handle 15 device ID PNP0c02 (020cd041)
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
ata4 failed to probe at port 0x1f0 irq 14 on isa0
ata5 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd1: unable to allocate IRQ
psm0: current command byte:0047
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:00, syncbits:00
bt0 failed to probe on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP/ECP_RLE/NIBBLE_ID/ECP_ID/ECP_RLE_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: <EPSON LP-8400PS3> PRINTER POSTSCRIPT
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppc1: parallel port found at 0x278
ppc1: using extended I/O port range
ppc1: ECP SPP ECP+EPP SPP
ppc1: <Parallel port> at port 0x278-0x27f irq 5 on isa0
ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc1: FIFO with 16/16/15 bytes threshold
ppi-: ppi0 already exists, using ppi1 instead
plip-: plip0 already exists, using plip1 instead
lpt-: lpt0 already exists, using lpt1 instead
ppi1: <Parallel I/O> on ppbus1
plip1: <PLIP network interface> on ppbus1
bpf: lp1 attached
lpt1: <Printer> on ppbus1
lpt1: Interrupt-driven port
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
sc1: no video adapter found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
BIOS Geometries:
0:026b7f3f 0..619=620 cylinders, 0..127=128 heads, 1..63=63 sectors
1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
2:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
3:0082fe3f 0..130=131 cylinders, 0..254=255 heads, 1..63=63 sectors
4:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
5:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
6:0104fe3f 0..260=261 cylinders, 0..254=255 heads, 1..63=63 sectors
7:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
bpf: faith0 attached
ad0: success setting WDMA2 on VIA chip
Creating DISK ad0
ad0: <WDC AC32500H/24.09P07> ATA-0 disk at ata0-master
ad0: 2441MB (4999680 sectors), 4960 C, 16 H, 63 S, 512 B
ad0: 1 secs/int, 1 depth queue, WDMA2
ad0: piomode=4 dmamode=2 udmamode=-1 cblid=0
ad1: success setting UDMA4 on VIA chip
Creating DISK ad1
ad1: <Maxtor 31536U2/BAC51NJ0> ATA-6 disk at ata0-slave
ad1: 14655MB (30015216 sectors), 29777 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA66
ad1: piomode=4 dmamode=2 udmamode=4 cblid=1
ad3: success setting UDMA2 on VIA chip
Creating DISK ad3
ad3: <FUJITSU MPC3102AT E/6207> ATA-3 disk at ata1-slave
ad3: 9765MB (20000536 sectors), 19841 C, 16 H, 63 S, 512 B
ad3: 16 secs/int, 1 depth queue, UDMA33
ad3: piomode=4 dmamode=2 udmamode=2 cblid=0
ad4: success setting UDMA5 on HighPoint chip
Creating DISK ad4
ad6: success setting UDMA5 on HighPoint chip
Creating DISK ad6
ar0: 43979MB <ATA RAID1 array> [5606/255/63] subdisks:
ad4: <IBM-DTLA-307045/TX6OA60A> ATA-5 disk at ata2-master
ad4: 43979MB (90069840 sectors), 89355 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA100
ad4: piomode=4 dmamode=2 udmamode=5 cblid=1
ad6: <IBM-DTLA-307045/TX6OA60A> ATA-5 disk at ata3-master
ad6: 43979MB (90069840 sectors), 89355 C, 16 H, 63 S, 512 B
ad6: 16 secs/int, 1 depth queue, UDMA100
ad6: piomode=4 dmamode=2 udmamode=5 cblid=1
Creating DISK ar0
ata1-master: piomode=3 dmamode=1 udmamode=-1 dmaflag=1
ata1-master: success setting PIO3 on generic chip
acd0: <TOSHIBA CD-ROM XM-5602B/1796> CDROM drive at ata1 as master
acd0: read 1377KB/s (32754KB/s), 256KB buffer, PIO3
acd0: Reads: CD-R, CD-DA
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(probe0:ahc0:0:0:0): Retrying Command
(probe3:ahc0:0:3:0): Retrying Command
(probe4:ahc0:0:4:0): Retrying Command
(probe5:ahc0:0:5:0): Retrying Command
(probe6:ahc0:0:6:0): Retrying Command
(probe5:ahc0:0:5:0): error 22
(probe5:ahc0:0:5:0): Unretryable Error
(ahc0:A:0:0): Sending SDTR period c, offset 7f
(ahc0:A:0:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
ahc0: target 0 synchronous at 10.0MHz, offset = 0xf
(ahc0:A:3:0): Sending WDTR 1
(ahc0:A:3:0): Received WDTR 1 filtered to 1
ahc0: target 3 using 16bit transfers
(ahc0:A:3:0): Sending SDTR period a, offset 7f
(ahc0:A:3:0): Received SDTR period a, offset 3f
Filtered to period a, offset 3f
ahc0: target 3 synchronous at 40.0MHz, offset = 0x3f
(ahc0:A:4:0): Sending WDTR 1
(ahc0:A:4:0): Received WDTR 1 filtered to 1
ahc0: target 4 using 16bit transfers
(ahc0:A:4:0): Sending SDTR period a, offset 7f
(ahc0:A:4:0): Received SDTR period a, offset 3f
Filtered to period a, offset 3f
ahc0: target 4 synchronous at 40.0MHz, offset = 0x3f
(ahc0:A:6:0): Sending SDTR period c, offset 7f
(ahc0:A:6:0): Received SDTR period c, offset f
Filtered to period c, offset f
ahc0: target 6 synchronous at 20.0MHz, offset = 0xf
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <IBM DPES-31080 S31Q> Fixed Direct Access SCSI-2 device
pass0: Serial Number 2C602798
pass0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
pass1 at ahc0 bus 0 target 3 lun 0
pass1: <IBM DPSS-318350N S96H> Fixed Direct Access SCSI-3 device
pass1: Serial Number ZE1FY518
pass1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
pass2 at ahc0 bus 0 target 4 lun 0
pass2: <IBM DPSS-318350N S96H> Fixed Direct Access SCSI-3 device
pass2: Serial Number ZE1G7243
pass2: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
pass3 at ahc0 bus 0 target 5 lun 0
pass3: <COMPAQ CD-ROM CR-503BCQ 1.1i> Removable CD-ROM SCSI-2 device
pass3: 3.300MB/s transfers
pass4 at ahc0 bus 0 target 6 lun 0
pass4: <QUANTUM FIREBALL SE2.1S PJ09> Fixed Direct Access SCSI-2 device
pass4: Serial Number 632731429223
pass4: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
Creating DISK cd0
Creating DISK da0
Creating DISK da1
Creating DISK da2
Creating DISK da3
Mounting root from ufs:/dev/ad0s3a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DPES-31080 S31Q> Fixed Direct Access SCSI-2 device
da0: Serial Number 2C602798
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 1034MB (2118144 512 byte sectors: 255H 63S/T 131C)
da1 at ahc0 bus 0 target 3 lun 0
da1: <IBM DPSS-318350N S96H> Fixed Direct Access SCSI-3 device
da1: Serial Number ZE1FY518
da1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da2 at ahc0 bus 0 target 4 lun 0
da2: <IBM DPSS-318350N S96H> Fixed Direct Access SCSI-3 device
da2: Serial Number ZE1G7243
da2: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da2: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
(cd0:ahc0:0:5:0): error 6
(cd0:ahc0:0:5:0): Unretryable Error
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <COMPAQ CD-ROM CR-503BCQ 1.1i> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da3 at ahc0 bus 0 target 6 lun 0
da3: <QUANTUM FIREBALL SE2.1S PJ09> Fixed Direct Access SCSI-2 device
da3: Serial Number 632731429223
da3: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da3: 2051MB (4201304 512 byte sectors: 255H 63S/T 261C)
ad0s1: type 0xb, start 63, end = 4193279, size 4193217 : OK
ad0s2: type 0x5, start 4193280, end = 4249727, size 56448 : OK
ad0s3: type 0xa5, start 4249728, end = 4999679, size 749952 : OK
ad0s5: type 0x4, start 4193343, end = 4249727, size 56385 : OK
start_init: trying /sbin/init
ad1s1: type 0xa5, start 63, end = 30015215, size 30015153 : OK
da3s1: type 0x5, start 16065, end = 2474009, size 2457945 : OK
da3s2: type 0xa5, start 2474010, end = 4192964, size 1718955 : OK
da3s5: type 0xb, start 16128, end = 2474009, size 2457882 : OK
ad3s1: type 0xa5, start 63, end = 19999727, size 19999665 : OK
ad3s1: type 0xa5, start 63, end = 19999727, size 19999665 : OK
ad3s1: type 0xa5, start 63, end = 19999727, size 19999665 : OK
ad3s1: type 0xa5, start 63, end = 19999727, size 19999665 : OK
da3s1: type 0x5, start 16065, end = 2474009, size 2457945 : OK
da3s2: type 0xa5, start 2474010, end = 4192964, size 1718955 : OK
da3s5: type 0xb, start 16128, end = 2474009, size 2457882 : OK
da0s1: type 0xa5, start 63, end = 2104514, size 2104452 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 2104514, size 2104452 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
ar0s1: type 0xa5, start 63, end = 90060389, size 90060327 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
ar0s1: type 0xa5, start 63, end = 90060389, size 90060327 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da3s1: type 0x5, start 16065, end = 2474009, size 2457945 : OK
da3s2: type 0xa5, start 2474010, end = 4192964, size 1718955 : OK
da3s5: type 0xb, start 16128, end = 2474009, size 2457882 : OK
ad3s1: type 0xa5, start 63, end = 19999727, size 19999665 : OK
da0s1: type 0xa5, start 63, end = 2104514, size 2104452 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
ar0s1: type 0xa5, start 63, end = 90060389, size 90060327 : OK
Linux ELF exec handler installed
lpt0: switched to polled standard mode
link_elf: symbol linux_ioctl_register_handler undefined
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?87ae02tkf5.fsf>