Date: Fri, 9 Jun 2006 20:12:02 -0000 (GMT) From: jhall@vandaliamo.net To: fbsd@a1poweruser.com Cc: jhall@vandaliamo.net, freebsd-questions@freebsd.org Subject: RE: FBSD 6.0 and ppp Message-ID: <2068.199.223.158.225.1149883922.squirrel@admintool.trueband.net> In-Reply-To: <MIEPLLIBMLEEABPDBIEGKEEDHIAA.fbsd@a1poweruser.com> References: <1798.199.223.158.225.1149876446.squirrel@admintool.trueband.net> <MIEPLLIBMLEEABPDBIEGKEEDHIAA.fbsd@a1poweruser.com>
next in thread | previous in thread | raw e-mail | index | archive | help
The modem is answering the call. However, it looks like the ppplogin script is not being called. No information for tun1 is showing up in the log file. Permissions on ppplogin are 650 and the owners are root:network. If I run ppplogin from the command line, tun1 information shows up in the log file, but other wise it doesn't. Have I done something wrong in /etc/gettytab? Jay > You have to use modem "AT" commands to tell FreeBSD modem to answer > in coming calls. > > I complete detailed write up on 'user ppp' for answering incoming > calls can be found in the install guide at www.a1poweruser.com. > > -----Original Message----- > From: owner-freebsd-questions@freebsd.org > [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of > jhall@vandaliamo.net > Sent: Friday, June 09, 2006 2:07 PM > To: freebsd-questions@freebsd.org > Subject: FBSD 6.0 and ppp > > > I am trying to setup a remote FreeBSD server to allow me to dial in > and > check the network in case the WAN link goes does. I accomplished > this > with 5.3, and cannot figure out what I am doing wrong on FBSD 6.0. > I am > dialing using WIndows XP to establish a PPP connection > > I am using the second method outlined in man ppp. > > I added the following line to /etc/gettytab. > :pp=/usr/local/bin/ppplogin:\ > > /etc/ttys was changed to > ttyd0 "/usr/libexec/getty std.38400" dialup on secure > > /usr/local/bin/ppplogin was created and permissions are 775. > > The following was added to /etc/ppp/ppp.conf > > incoming: > set device /dev/cuad0 > set ifaddr 10.0.0.1 10.0.0.0/24 > enable pap > enable chap > allow users xxxx > > /etc/ppp/ppp.secret > xxxx<TAB>password<TAB>10.0.0.95 > > When the connection is initially dialed, I see tun1 opened (tun0 is > a DSL > connection) and the PID displayed. However, the Windows system > hangs with > Verifying Password and will eventually report error 721. > > Firewall rules are in place and allow all traffic from tun1. > > Any suggestions would be greatly appreciated. > > Thanks, > > > > Jay > > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2068.199.223.158.225.1149883922.squirrel>