Date: Mon, 05 Nov 2007 15:28:55 +0200 From: Krassimir Slavchev <krassi@bulinfo.net> To: freebsd-arm@freebsd.org Subject: Detecting USB devices at startup? Message-ID: <472F1A97.3090308@bulinfo.net>
next in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I have strange problem with my at91rm9200 board. At boot I get: ... ohci0: <AT91 integrated ohci controller> mem 0xdfe00000-0xdfefffff irq 23 on atmelarm0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] uhub0: 2 ports with 2 removable, self powered usbd_get_config_desc: confidx=0, bad desc len=9 type=36 uhub_explore: usb_new_device failed, error=INVAL uhub0: device problem (INVAL), disabling port 1 usb_new_device: set address 2 failed - trying a port reset usb_new_device: set address 2 failed - trying a port reset usbd_new_device: addr=2, getting first desc failed uhub_explore: usb_new_device failed, error=IOERROR uhub0: device problem (IOERROR), disabling port 2 But if I unplug and plug the usb device: umass0: <vendor 0x3538 USB Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on uhub0 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:0:0:-1: Attached to scbus0 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Generic USB Flash Disk 0.00> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: 250MB (512000 512 byte sectors: 64H 32S/T 250C) Any ideas why this happens? Best Regards PS1: I have this problem with all USB devices I tested. PS2: Errors about port 2 should be ignored. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (FreeBSD) iD8DBQFHLxqXxJBWvpalMpkRAgWxAKCITUyQzSSM+yNag6BKH+a8Sg2JZACgknWJ owwpuHVE+BN8P8oXR6OueDU= =1d62 -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?472F1A97.3090308>