Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 29 Oct 2002 19:50:58 -0500
From:      "TooMany Mirrors" <freebsdguru@hotmail.com>
To:        freebsd-questions@FreeBSD.ORG, freebsd-stable@freebsd.org
Subject:   RE: SCSI emulation help and patching
Message-ID:  <F201oygXLsxpTljBOh800000166@hotmail.com>

next in thread | raw e-mail | index | archive | help
I have a custom kernel and I'm running Stable I am really just making sure 
this is a resonable solution. However I have applied all patches and am 
getting an error during the build process. This is all applicalbe info

4.7-STABLE FreeBSD 4.7-STABLE #0: Mon Oct 28 12:16:28 EST 2002

patch < atapicam-20020820.diff
Hunk #1 succeeded at 172.
done

patch < atapicam-STABLE-config-20020820.diff
Hunk #1 succeeded at 1235 (offset 4 lines).
done

make buildkernel KERNCONF=BSDGURU
mkdir -p /usr/obj/usr/src/sys
cd /usr/src/sys/i386/conf;  
PATH=/usr/obj/usr/src/i386/usr/sbin:/usr/obj/usr/src/i386/usr/bin:/usr/obj/usr/src/i386/usr/games:/sbin:/bin:/usr/sbin:/usr/bin 
  config  -d /usr/obj/usr/src/sys/BSDGURU BSDGURU
Don't forget to do a ``make depend''
Warning: device "atapicam" is unknown
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.

This is my current kernel configuration
machine         i386
cpu             I686_CPU
ident           BSDGURU
maxusers        32

#makeoptions    DEBUG=-g                #Build kernel with gdb(1) debug 
symbols

options         MATH_EMULATE            #Support for x87 emulation
options         INET                    #InterNETworking
options         INET6                   #IPv6 communications protocols
options         FFS                     #Berkeley Fast Filesystem
options         FFS_ROOT                #FFS usable as root device [keep 
this!]
options         SOFTUPDATES             #Enable FFS soft updates support
options         UFS_DIRHASH             #Improve performance on big 
directories
options         MFS                     #Memory Filesystem
options         MD_ROOT                 #MD is a potential root device
options         NFS                     #Network Filesystem
options         NFS_ROOT                #NFS usable as root device, NFS 
required
options         MSDOSFS                 #MSDOS Filesystem
options         CD9660                  #ISO 9660 Filesystem
options         CD9660_ROOT             #CD-ROM usable as root, CD9660 
required
options         PROCFS                  #Process filesystem
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP 
THIS!]
options         SCSI_DELAY=15000        #Delay (in ms) before probing SCSI
options         UCONSOLE                #Allow users to grab the console
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         P1003_1B                #Posix P1003_1B real-time extensions
options         _KPOSIX_PRIORITY_SCHEDULING
options         ICMP_BANDLIM            #Rate limit bad replies
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~128k to driver.
options         AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~215k to driver.
options         CPU_ENABLE_SSE
options         USER_LDT
options         TCP_DROP_SYNFIN
options         EXT2FS                  # Mount linux partition
options         COMPAT_LINUX

# To make an SMP kernel, the next two are needed
#options        SMP                     # Symmetric MultiProcessor Kernel
#options        APIC_IO                 # Symmetric (APIC) I/O

device          isa
device          eisa
device          pci
device          pcm

# Floppy drives
device          fdc0    at isa? port IO_FD1 irq 6 drq 2
device          fd0     at fdc0 drive 0

# ATA and ATAPI devices
device          ata0    at isa? port IO_WD1 irq 14
device          ata1    at isa? port IO_WD2 irq 15
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
#device         atapifd                 # ATAPI floppy drives
device atapicam
options         ATA_STATIC_ID           #Static device numbering

# SCSI peripherals
device          scbus           # SCSI bus (required)
device          da              # Direct Access (disks)
device          cd              # CD
device          pass
# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc0 at isa? port IO_KBD
device          atkbd0  at atkbdc? irq 1 flags 0x1
device          psm0    at atkbdc? irq 12

device          vga0    at isa?

# splash screen/screen saver
pseudo-device   splash

# syscons is the default console driver, resembling an SCO console
device          sc0     at isa? flags 0x100

# Floating point support - do not disable.
device          npx0    at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device          apm0    at nexus? disable flags 0x20 # Advanced Power 
Management

# PCCARD (PCMCIA) support
device          card
device          pcic0   at isa? irq 0 port 0x3e0 iomem 0xd0000
device          pcic1   at isa? irq 0 port 0x3e2 iomem 0xd4000 disable

# Serial (COM) ports
device          sio0    at isa? port IO_COM1 flags 0x10 irq 4
device          sio1    at isa? port IO_COM2 irq 3
device          sio2    at isa? disable port IO_COM3 irq 5
device          sio3    at isa? disable port IO_COM4 irq 9

# Parallel port
device          ppc0    at isa? irq 7
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da


# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support

# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device          ed0     at isa? port 0x280 irq 10 iomem 0xd8000
# The probe order of these is presently determined by i386/isa/isa_compat.c.
device          ie0     at isa? port 0x300 irq 10 iomem 0xd0000
#device         le0     at isa? port 0x300 irq 5 iomem 0xd0000
device          lnc0    at isa? port 0x280 irq 10 drq 0
device          cs0     at isa? port 0x300
device          sn0     at isa? port 0x300 irq 10

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device   loop            # Network loopback
pseudo-device   ether           # Ethernet support
pseudo-device   sl      1       # Kernel SLIP
pseudo-device   ppp     1       # Kernel PPP
pseudo-device   tun             # Packet tunnel.
pseudo-device   pty             # Pseudo-ttys (telnet etc)
pseudo-device   md              # Memory "disks"
pseudo-device   gif             # IPv6 and IPv4 tunneling
pseudo-device   faith   1       # IPv6-to-IPv4 relaying (translation)
pseudo-device   snp     10

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device   bpf             #Berkeley packet filter

# USB support
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          usb             # USB Bus (required)
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
device          uscanner        # Scanners
device          urio            # Diamond Rio MP3 Player
# USB Ethernet, requires mii
device          aue             # ADMtek USB ethernet
device          cue             # CATC USB ethernet
device          kue             # Kawasaki LSI USB ethernet


Let me know what I'm doing wrong here :) Thanks all

_________________________________________________________________
Broadband? Dial-up? Get reliable MSN Internet Access. 
http://resourcecenter.msn.com/access/plans/default.asp


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F201oygXLsxpTljBOh800000166>