Date: Fri, 15 Sep 2000 12:52:24 +0200 From: Irvine Short <irvine@sanbi.ac.za> To: freebsd-questions@freebsd.org Subject: ppp w PAP & Cisco 2511 Message-ID: <39C1FF68.24FD3697@sanbi.ac.za>
next in thread | raw e-mail | index | archive | help
Hi All I'm trying to get an analog leased line going. The modems are set to autonegotiate and connect with locked baud rates, which they do no problem, so I'm treating it as a direct cable connect. On the ISP side the modem is connected to an Async port on a Cisco 2511 A Radius server does the authentication. What happens is this: I'm using ppp 2.2.4 as I'm running 2.2.5-RELEASE and the latest on Brian's site (2.27) won't compile (although it does on 3.4-RELEASE) PPP Version 2.24 - Nov 16 1999 I have an Authname and an Authkey set with login and phone ste to null. I've tried openmode passive & active, no difference. Here's what the log says: Sep 14 18:55:00 mail ppp[1171]: Phase: deflink: hangup -> opening Sep 14 18:55:00 mail ppp[1171]: Phase: deflink: Enter pause (3) for redialing. Sep 14 18:55:03 mail ppp[1171]: Phase: deflink: Redial timer expired. Sep 14 18:55:03 mail ppp[1171]: Phase: deflink: Connected! Sep 14 18:55:03 mail ppp[1171]: Phase: deflink: opening -> dial Sep 14 18:55:03 mail ppp[1171]: Phase: deflink: dial -> carrier Sep 14 18:55:04 mail ppp[1171]: Phase: deflink: /dev/cuaa2: CD detected Sep 14 18:55:04 mail ppp[1171]: Phase: deflink: carrier -> login Sep 14 18:55:04 mail ppp[1171]: Phase: deflink: login -> lcp Sep 14 18:55:20 mail ppp[1171]: Phase: deflink: Disconnected! Sep 14 18:55:20 mail ppp[1171]: Phase: deflink: lcp -> logout Sep 14 18:55:20 mail ppp[1171]: Phase: deflink: logout -> hangup Sep 14 18:55:20 mail ppp[1171]: Phase: deflink: Disconnected! Sep 14 18:55:20 mail ppp[1171]: Phase: deflink: Connect time: 17 secs: 368 octet s in, 265 octets out Sep 14 18:55:20 mail ppp[1171]: Phase: total 37 bytes/sec, peak 48 bytes/sec on Thu Sep 14 18:55:20 2000 Sep 14 18:55:20 mail ppp[1171]: Phase: deflink: hangup -> opening Sep 14 18:55:20 mail ppp[1171]: Phase: deflink: Enter pause (3) for redialing. Sep 14 18:55:23 mail ppp[1171]: Phase: deflink: Redial timer expired. Sep 14 18:55:23 mail ppp[1171]: Phase: deflink: Connected! Sep 14 18:55:23 mail ppp[1171]: Phase: deflink: opening -> dial Sep 14 18:55:23 mail ppp[1171]: Phase: deflink: dial -> carrier Sep 14 18:55:24 mail ppp[1171]: Phase: deflink: /dev/cuaa2: CD detected It basically goes round & round, never getting anywhere. Any ideas? -- Irvine Short Sys Admin SANBI, University of the Western Cape, South Africa http://www.sanbi.ac.za tel: +27-21-959 3645 fax: +27-21-959 2512 cel: +27-82-494 3828 -- Irvine Short Sys Admin SANBI, University of the Western Cape, South Africa http://www.sanbi.ac.za tel: +27-21-959 3645 fax: +27-21-959 2512 cel: +27-82-494 3828 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39C1FF68.24FD3697>