Date: Tue, 7 Jul 2009 13:36:29 -0400 From: Gary Palmer <gpalmer@freebsd.org> To: Jiansong Liu <jiansong.liu@gmail.com> Cc: freebsd-scsi@freebsd.org Subject: Re: iscsi_initiator 2.2.2 slow to write and read Message-ID: <20090707173629.GA33007@in-addr.com> In-Reply-To: <7f834c1c0907070405mdab72u3223d90b84b2a201@mail.gmail.com> References: <7f834c1c0907070405mdab72u3223d90b84b2a201@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Jul 07, 2009 at 07:05:03PM +0800, Jiansong Liu wrote:
> Hello All,
>
> I downloaded the latest iscsi_initiator 2.2.2 from Danny's FTP,
> and compile kernel and iscontrol with 7.2 STABLE GENERIC config, only got
> about 800KB/Sec speed to a DELL MD3000i disk array, I searched in
> this malling list and found a patch, but it seems is not for this version
> (2.2.2), any advice would be great appreciated.
>
> here are some details about my system:
>
> # sysctl net.iscsi
> net.iscsi.driver_version: 2.2.2
> net.iscsi.isid: ???DIB00
> net.iscsi.sessions: 1
> net.iscsi.0.targetname:
> iqn.1984-05.com.dell:powervault.md3000i.60024e80004e71a9000000004a011120
> net.iscsi.0.targeaddress: 192.168.4.182
> net.iscsi.0.stats: recv=594 sent=594 flags=0x0000039f pdus-alloc=16
> pdus-max=16 cws=426 cmd=157 exp=157 max=300 stat=159 itt=157
> net.iscsi.0.douio: 0
> net.iscsi.0.pid: 754
>
> # cat /etc/iscsi.conf
> scpstorage01 {
> initiatorname =iqn.2005-01.il.ac.huji.cs::static01.com
> TargetName
> =iqn.1984-05.com.dell:powervault.md3000i.60024e80004e71a9000000004a011120
> TargetAddress =192.168.4.182:3260,1
> tags =4
> }
I'm no expert, but if that "tags" line refers to SCSI tags then that
number is too small. Try increasing it and see if that helps to
address the problem.
Regards,
Gary
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090707173629.GA33007>