Date: Mon, 27 Apr 1998 11:01:35 -0400 From: "Stephen Krzywicki" <sek@superiorcam.com> To: "Greg Troxel" <gdt@fnord.ir.bbn.com> Subject: Re: Digital 21143-PC network drivers Message-ID: <01bd71ed$5f3468e0$050000c0@seknb.superiorcam.com>
next in thread | raw e-mail | index | archive | help
Here's what I tried this morning: A different set of DE card that are older with the 21140-AE chip. Even though I have them plugged into a 10Mb hub FreeBSD still sees them running in 100Mb mode. Keep in mine that these cards work fine (and the newer ones) in stock NT4.0 install dated 10-14-96. I'm trying to dig up the address of the site that had the updated de0 drivers. I 'll post it when I find it but these are pretty common cards and I would like to get them working in the stock FreeBSD setup. Here's the messages I get a boot: Apr 27 10:37:58 sek3 /kernel: Copyright (c) 1992-1998 FreeBSD Inc. Apr 27 10:37:58 sek3 /kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993 Apr 27 10:37:58 sek3 /kernel: The Regents of the University of California. All rights reserved. Apr 27 10:37:58 sek3 /kernel: Apr 27 10:37:58 sek3 /kernel: FreeBSD 2.2-980413-SNAP #0: Mon Apr 13 15:41:02 GMT 1998 Apr 27 10:37:58 sek3 /kernel: root@make.ican.net:/usr/src/sys/compile/GENERIC Apr 27 10:37:58 sek3 /kernel: CPU: Pentium (150.34-MHz 586-class CPU) Apr 27 10:37:58 sek3 /kernel: Origin = "GenuineIntel" Id = 0x52c Stepping=12 Apr 27 10:37:58 sek3 /kernel: Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> Apr 27 10:37:58 sek3 /kernel: real memory = 33554432 (32768K bytes) Apr 27 10:37:58 sek3 /kernel: avail memory = 30445568 (29732K bytes) Apr 27 10:37:58 sek3 /kernel: Probing for devices on PCI bus 0: Apr 27 10:37:58 sek3 /kernel: chip0 <Intel 82437FX PCI cache memory controller> rev 2 on pci0:0:0 Apr 27 10:37:58 sek3 /kernel: chip1 <Intel 82371FB PCI-ISA bridge> rev 2 on pci0:7:0 Apr 27 10:37:58 sek3 /kernel: chip2 <Intel 82371FB IDE interface> rev 2 on pci0:7:1 Apr 27 10:37:58 sek3 /kernel: ahc0 <Adaptec 2940 SCSI host adapter> rev 3 int a irq 9 on pci0:17:0 Apr 27 10:37:58 sek3 /kernel: ahc0: aic7870 Single Channel, SCSI Id=7, 16 SCBs Apr 27 10:37:58 sek3 /kernel: ahc0 waiting for scsi devices to settle Apr 27 10:37:58 sek3 /kernel: (ahc0:0:0): "HP C3725S 6039" type 0 fixed SCSI 2 Apr 27 10:37:59 sek3 /kernel: sd0(ahc0:0:0): Direct-Access 2047MB (4194058 512 byte sectors) Apr 27 10:37:59 sek3 /kernel: vga0 <VGA-compatible display device> rev 9 on pci0:18:0 Apr 27 10:37:59 sek3 /kernel: de0 <Digital 21140A Fast Ethernet> rev 34 int a irq 11 on pci0:19:0 Apr 27 10:37:59 sek3 /kernel: de0: ACCTON EN1207 21140A [10-100Mb/s] pass 2.2 Apr 27 10:37:59 sek3 /kernel: de0: address 00:00:e8:40:db:90 Apr 27 10:37:59 sek3 /kernel: de0: enabling 100baseTX port Apr 27 10:37:59 sek3 /kernel: de1 <Digital 21140A Fast Ethernet> rev 34 int a irq 12 on pci0:20:0 Apr 27 10:37:59 sek3 /kernel: de1: ACCTON EN1207 21140A [10-100Mb/s] pass 2.2 Apr 27 10:37:59 sek3 /kernel: de1: address 00:00:e8:3c:5b:bc Apr 27 10:37:59 sek3 /kernel: de1: enabling 100baseTX port Apr 27 10:37:59 sek3 /kernel: Probing for devices on the ISA bus: Apr 27 10:37:59 sek3 /kernel: sc0 at 0x60-0x6f irq 1 on motherboard Apr 27 10:37:59 sek3 /kernel: sc0: VGA color <16 virtual consoles, flags=0x0> Apr 27 10:37:59 sek3 /kernel: ed0 not found at 0x300 Apr 27 10:37:59 sek3 /kernel: sio0 at 0x3f8-0x3ff irq 4 on isa Apr 27 10:37:59 sek3 /kernel: sio0: type 16550A Apr 27 10:37:59 sek3 /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa Apr 27 10:37:59 sek3 /kernel: sio1: type 16550A Apr 27 10:38:00 sek3 /kernel: lpt0 at 0x378-0x37f irq 7 on isa Apr 27 10:38:00 sek3 /kernel: lpt0: Interrupt-driven port Apr 27 10:38:00 sek3 /kernel: lp0: TCP/IP capable interface Apr 27 10:38:00 sek3 /kernel: lpt1 not found at 0xffffffff Apr 27 10:38:00 sek3 /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa Apr 27 10:38:00 sek3 /kernel: fdc0: FIFO enabled, 8 bytes threshold Apr 27 10:38:00 sek3 /kernel: fd0: 1.44MB 3.5in Apr 27 10:38:00 sek3 /kernel: wdc0 not found at 0x1f0 Apr 27 10:38:00 sek3 /kernel: wdc1 not found at 0x170 Apr 27 10:38:00 sek3 /kernel: npx0 flags 0x1 on motherboard Apr 27 10:38:00 sek3 /kernel: npx0: INT 16 interface Apr 27 10:38:00 sek3 /kernel: changing root device to sd0s3a Apr 27 10:38:00 sek3 /kernel: Intel Pentium F00F detected, installing workaround -----Original Message----- From: Greg Troxel <gdt@fnord.ir.bbn.com> To: Stephen Krzywicki <sek@superiorcam.com> Cc: freebsd-stable@freebsd.org <freebsd-stable@freebsd.org> Date: Saturday, April 25, 1998 8:55 PM Subject: Re: Digital 21143-PC network drivers >As far as I know the 21143 is fairly new, and is included on the >DE500-BA. II just got some, and the stock 2.2.6 kernel seems to work >fine with it. 970921 is a long time ago; did you try the driver >that's in -stable now? There have been a number of commits since >then, and one of them pulled in the -current driver. > >Here's dmesg output from a PII with a BA booting the 2.2.6 >release kernel. > >FreeBSD 2.2.6-RELEASE #0: Wed Mar 25 02:28:49 GMT 1998 > jkh@time.cdrom.com:/usr/src/sys/compile/GENERIC >CPU: Pentium Pro (300.68-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x634 Stepping=4 > Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,M MX> >... >de0 <Digital 21143 Fast Ethernet> rev 48 int a irq 10 on pci0:10:0 >de0: DEC DE500-BA 21143 [10-100Mb/s] pass 3.0 >de0: address 00:00:f8:08:5a:4f >de1 <Digital 21143 Fast Ethernet> rev 48 int a irq 10 on pci0:11:0 >de1: DEC DE500-BA 21143 [10-100Mb/s] pass 3.0 >de1: address 00:00:f8:1f:f7:7f >... >de1: autosense failed: cable problem? >de0: enabling 10baseT port > >There are two cards; one is plugged into a 10Mb/s hub, and the other >indeed has no cable in it. > > Greg Troxel <gdt@ir.bbn.com> > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01bd71ed$5f3468e0$050000c0>