Date: Mon, 13 Nov 2000 20:21:24 +0100 From: "Piotr K. Isajew" <piotr@piotr.zigzag.pl> To: Sean O'Connell <sean@stat.Duke.EDU> Cc: freebsd-mobile@freebsd.org Subject: Re: OZ6832 question Message-ID: <20001113202123.B1820@piotr.zigzag.pl> In-Reply-To: <20001113104714.E83818@stat.Duke.EDU>; from Sean O'Connell on Mon, Nov 13, 2000 at 10:47:14AM -0500 References: <20001113101311.A14933@piotr.zigzag.pl> <20001113104714.E83818@stat.Duke.EDU>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, First of all, I have FreeBSD 4.0-RELEASE installed on that notebook. Initially OZ6832 was detected by kernel as: /kernel: chip2: <PCI to CardBus bridge (vendor=1217 device=6832)> irq 9 at device 19.0 on pci0 /kernel: chip3: <PCI to CardBus bridge (vendor=1217 device=6832)> irq 9 at device 19.1 on pci0 I've modified the kernel according to your suggestions (that changes in pcic_p.*) and now dmesg looks like this: /kernel pcic-pci0: <O2micro OZ_6832 PC-Card Bridge> irq 9 at device 19.0 on pic0 /kernel pcic-pci1: <O2micro OZ_6832 PC-Card Bridge> irq 9 at device 19.1 on pci0 But: # pccardd pccardd[235]: fatal error: no PC-CARD slots pciconf -l for that chip shows: pcic-pci0@pci0:19:0: class=0x060700 card=0x10021025 chip=0x68321217 rev=0x34 hdr=0x02 pcic-pci1@pci0:19:1: class=0x060700 card=0x10021025 chip=0x68321217 rev=0x34 hdr=0x02 So, I've got a problem ;-) Any advice? Piotr On Mon, Nov 13, 2000 at 10:47:14AM -0500, Sean O'Connell wrote: > Piotr K. Isajew stated: > : Hi, > : > : I bought a new notebook (as in subject). It appears that it have a > : O2Micro OZ6832 chipset used in PCMICA controller. As I noticed FreeBSD > : installation floppies does not recognize this PCMCIA controller. Is > : there any way (besides of writing a new driver on my own) to get this > : working after setting up the system? > : > : Thanks in advance > > Piotr- > > It might help if we (the freebsd-mobile list) had some more info. > Do you have FreeBSD up and running on the machine now? If so, what > version? If you do, attaching/including /var/run/dmesg.boot might > help us figure out what is going on. > > Also, maybe the output from pciconf -l (might not be as useful). > > It might be as simple as adding an entry for the > > O2Micro OZ6832 > > to /sys/pci/pcic_p.c and /sys/pci/pcic_p.h with the info from > pciconf -l > > HTH, > S > ----------------------------------------------------------------------- > Sean O'Connell Email: sean@stat.Duke.EDU > Institute of Statistics and Decision Sciences Phone: (919) 684-5419 > Duke University Fax: (919) 684-8594 > -- Piotr Isajew ZigZag Sp. z o.o. System Administrator PIsajew@zigzag.pl tel. +4822 6272180 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001113202123.B1820>