Date: Mon, 27 Sep 2004 18:51:07 -0700 From: Eddie Dandrades <normal1@gmail.com> To: Scott Gasch <scott@wannabe.guru.org> Cc: freebsd-multimedia@freebsd.org Subject: Re: no sound with bktr driver Message-ID: <7df4e19b04092718512910db17@mail.gmail.com> In-Reply-To: <20040928013906.GA24571@wannabe.guru.org> References: <20040927163716.GA17469@wannabe.guru.org> <20040927195126.GA26386@fj.batmule.dk> <20040928013906.GA24571@wannabe.guru.org>
next in thread | previous in thread | raw e-mail | index | archive | help
I had the same issue with a Phillips FM Tuner Card and never got audio out of it so I gave up :( - I truly hope you get a real answer and a final solution. Cheers! On Mon, 27 Sep 2004 18:39:06 -0700, Scott Gasch <scott@wannabe.guru.org> wrote: > Hello, > > Still no luck getting audio on this device. I read bktr_audio.c / > bktr_carc.c and tried building a kernel with BKTR_OVERRIDE_MSP=1 with > no luck (trying to bypass the audio mux code). Looking at the card > (and knowing nothing about it) I do not see any obvious MSP or DPL > looking audio chips. I do see an Altera FPGA, a Conexant Fusion 878A > capture chip, and a VTech Kfir chip which I believe is an MPEG > encoder. > > FWIW here is the verbose dmesg output (with me not force/overriding > anything): > > bktr0: <BrookTree 878> mem 0xec100000-0xec100fff irq 17 at device 6.0 > on pci0 > brooktree0: PCI bus latency is 32. > bktr0: buffer size 3555328, addr 0x5000000 > bktr0: GPIO is 0x00ffffff > bktr0: subsystem 0x0070 0x4500 > bktr0: Hauppauge Model 45231 D323 > bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner. > bktr0: msp34xx: init: chip=MSP34255?-?31, has NICAM support > pci0: <multimedia> at device 6.1 (no driver attached) > > And here fxtv's -debug startup output: > > DETECTED CAPTURE CARD(S) [DRIVER PROBES]: > bktr0: <BrookTree 878> mem 0xec100000-0xec100fff irq 17 at device > 6.0 on pci0 > brooktree0: PCI bus latency is 32. > bktr0: buffer size 3555328, addr 0x5000000 > bktr0: GPIO is 0x00ffffff > bktr0: subsystem 0x0070 0x4500 > bktr0: Hauppauge Model 45231 D323 > bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner. > bktr0: msp34xx: init: chip=MSP34255?-?31, has NICAM support > bktr0: msp3400: thread started > ata0-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin > > SYSCTL MIB VALUES: > kern.version: FreeBSD 5.2.1-RELEASE-p10 #7: Mon Sep 27 19:18:46 > PDT 2004 > root@jukebox.smg:/usr/src/sys/i386/compile/JUKEBOX > > hw.bt848.card: -1 > hw.bt848.tuner: -1 > hw.bt848.reverse_mute: -1 > hw.bt848.format: -1 > hw.bt848.slow_msp_audio: -1 > hw.bt848.stereo_once: 0 > hw.bt848.amsound: 0 > hw.bt848.dolby: 0 > > TUNER SIGNATURE (0x01 - 0xff): > 00 00 00 00 00 00 00 00 00 00 ff 00 02 00 00 00 > > TUNER I2C DEVICES FOUND AT: > 0xa0, 0xa2, 0xa4, 0xa6, 0xa8, 0xaa, 0xac, 0xae, 0xc2 > > CAPTURE CARD EEPROM CONTENTS: > Read 256 EEPROM bytes (0x00 - 0xff) > 84 12 00 00 05 50 0e 7f 08 17 23 af b0 93 34 91 > 00 00 00 00 05 84 0a 00 01 01 20 77 00 40 20 fc > 40 00 74 02 01 8a 03 79 4a 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 45 00 00 70 > 84 12 00 00 05 50 0e 7f 08 17 23 af b0 93 34 91 > 00 00 00 00 05 84 0a 00 01 01 20 77 00 40 20 fc > 40 00 74 02 01 8a 03 79 4a 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 45 00 00 70 > > SUPPORTED FREQUENCY SETS: > 1 nabcst > 2 cableirc > 3 cablehrc > 4 weurope > 5 jpnbcst > 6 jpncable > 7 xussr > 8 australia > 9 france > > Supported RGB Capture Pixel Formats: > bpp Bpp RGB Masks Swap > --- --- ---------------------------- ---- > 15 2 00007c00, 000003e0, 0000001f NB > 16 2 0000f800, 000007e0, 0000001f NB > 24 3 00ff0000, 0000ff00, 000000ff B > 24 4 00ff0000, 0000ff00, 000000ff NBWb > > Supported YUV Capture Pixel Formats: > YUVSize HSamp VSamp Pack CompOrder T->B L->R YTrans > ------- ----- ----- ------ --------- ---- ---- ------ > 8,8,8 1,2,2 1,1,1 PLANAR YUV Y Y N > 8,8,8 1,2,2 1,1,1 PACKED YUYV Y Y N > 8,8,8 1,2,2 1,2,2 PLANAR YUV Y Y N > > I'm out of ideas at this point. Any advice greatly appreciated. > > Scott > > On Mon, Sep 27, 2004 at 09:51:26PM +0200, Flemming Jacobsen wrote: > ] Scott Gasch wrote: > ] > I'm trying to get a Hauppauge WinTV PVR 45xxx card working under > ] > FreeBSD 5.2.1. With the bktr driver I am able to get video but no > ] > sound. > ] > > ] > [ ... ] > ] > bktr0: <BrookTree 878> mem 0xec100000-0xec100fff irq 17 at device 6.0 on pci0 > ] > bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner. > ] > pci0: <multimedia> at device 6.1 (no driver attached) > ] > ] I think I have the same card at home (being at SANE2004 I can't > ] check). > ] Try selecting something like "Audio internal" from the fxtv menu. > ] > ] > ] Hyg' > ] Flemming > ] > ] -- > ] Flemming Jacobsen Email: fj@batmule.dk > ] ---=== If speed kills, Windows users may live forever. ===--- > > -- > Scott Gasch > scott@wannabe.guru.org > _______________________________________________ > freebsd-multimedia@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia > To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@freebsd.org" > -- -gabriel
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7df4e19b04092718512910db17>