Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 17 Dec 2019 11:13:09 +0800
From:      ykla <yklaxds@gmail.com>
To:        Kyle Evans <kevans@freebsd.org>
Cc:        "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org>
Subject:   Re: How to boot freebsd on rpi4b?
Message-ID:  <CA%2BPGaYDLDMwchHtm%2Be9X2SyQJu0hTmJrb6gE7ipZpS7WAj2SZQ@mail.gmail.com>
In-Reply-To: <CACNAnaEAcZxVjWuOFW5fbKNoPM1Sste1%2BWj7=uiy8Nx3dSzh5A@mail.gmail.com>
References:  <CA%2BPGaYB4_ef2xgdNv=0ZfHJXFOHTt4UgCgM02cZi1s5vo%2BaVXw@mail.gmail.com> <CACNAnaG7EMDX06_iuhNzKq=RgM8ZvzSrYApmKSMQN7VjkLGgmg@mail.gmail.com> <CA%2BPGaYDaUp2nQhN%2BtE23Wxa04sM2EZ7CeNkseRjWs2zUgzyK-g@mail.gmail.com> <CA%2BPGaYCwhVZ792hNLXrO-knReHC-85wXk5wrNzconOYWSGsJ0A@mail.gmail.com> <CACNAnaEAcZxVjWuOFW5fbKNoPM1Sste1%2BWj7=uiy8Nx3dSzh5A@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
I reboot for 10 times and now show me root login, but usually stops on lo0.
Here's log:

Connecting to COM10...
Connected.

MMC:   emmc2@7e340000: 0, mmc@7e300000: 1
Loading Environment from FAT... In:    serial
Out:   vidconsole
Err:   vidconsole
Net:   Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found EFI removable media binary efi/boot/bootaa64.efi
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Scanning disk emmc2@7e340000.blk...
Scanning disk mmc@7e300000.blk...
Disk mmc@7e300000.blk not ready
Found 3 disks
BootOrder not defined
EFI boot manager: Cannot load any image
677944 bytes read in 77 ms (8.4 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Consoles: EFI console
    Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p1:
FreeBSD/arm64 EFI loader, Revision 1.1
(Thu Dec 12 06:37:06 UTC 2019 root@releng1.nyi.freebsd.org)

   Command line arguments: loader.efi
   Image base: 0x39ea3000
   EFI version: 2.80
   EFI Firmware: Das U-Boot (rev 8217.4096)
   Console: efi (0x1000)
   Load Path: /efi\boot\bootaa64.efi
   Load Device:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,MBR,0xf6fc52a=
f,0x81f,0x18fa8)
Trying ESP:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,MBR,0xf6fc52a=
f,0x81f,0x18fa8)
Setting currdev to disk0p1:
Trying:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,MBR,0xf6fc52a=
f,0x197c7,0xeb68839)
Setting currdev to disk0p2:
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
Loading kernel...
/boot/kernel/kernel text=3D0x9785cc data=3D0x18f538 data=3D0x0+0x79b9e0
syms=3D[0x8+0x1441e0+0x8+0x12ebce]
Loading configured modules...
/boot/kernel/umodem.ko text=3D0x2100 text=3D0x13a0 data=3D0x6e0+0x10
syms=3D[0x8+0xf48+0x8+0xb6e]
/boot/entropy size=3D0x1000

Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by EFI at 0x7ef2000.
EFI framebuffer information:
addr, size     0x3eab2000, 0x148000
dimensions     656 x 512
stride         656
masks          0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r355634: Thu Dec 12 07:51:26 UTC 2019
    root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC
arm64
FreeBSD clang version 9.0.0 (tags/RELEASE_900/final 372316) (based on LLVM
9.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 656x512
module firmware already present!
KLD file umodem.ko is missing dependencies
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP 39f53000 mode 2 pages 1
MAP 39f57000 mode 2 pages 1
MAP 3b360000 mode 2 pages 16
MAP fe100000 mode 0 pages 1
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD
13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before
FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
simplebus1: <Flattened device tree simple bus> on ofwbus0
simplebus2: <Flattened device tree simple bus> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller> mem
0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x4004600=
0-0x40047fff
irq 46 on simplebus0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 22,23
on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
generic_timer0: <ARMv7 Generic Timer> irq 4,5,6,7 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq
9,10,11,12,13,14,15,16,17,18,19 on simplebus0
Checking root against brcm,bcm2837
Checking root against brcm,bcm2711
bcmwd0: <BCM2708/2835 Watchdog> mem
0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on
simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 21 on
simplebus0
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 24 on
simplebus0
uart0: console (115200,n,8,1)
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff irq
60 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
sdhci_bcm1: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq
61 on simplebus0
mmc1: <MMC/SD bus> on sdhci_bcm1
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: keeping existing fb bpp of 32
fbd0 on fb0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 13.0=
.
VT: Replacing driver "efifb" with new "fb".
fb0: 656x512(656x512@0,0) 32bpp
fb0: fbswap: 1, pitch 2624, base 0x3eab2000, screen_size 1343488
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <led1> failed to map pin
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usb_needs_explore_all: no devclass
mmcsd0: 126GB <SDHC AcMKS 0.2 SN 40400CB7 MFG 06/2019 by 156 SO> at mmc0
50.0MHz/4bit/65535-block
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active
command.
sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active
command.
sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active
command.
sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active
command.
sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active
command.
sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active
command.
sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active
command.
sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
mmc1: No compatible cards found on bus
Release APs...done
CPU  0: ARM Cortex-A72 r0p3 affinity:  0
 Instruction Set Attributes 0 =3D <CRC32>
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
 Instruction Set Attributes 1 =3D <>
         Processor Features 0 =3D <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
         Processor Features 1 =3D <>
      Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit
ASID,16TB PA>
      Memory Model Features 1 =3D <8bit VMID>
      Memory Model Features 2 =3D <32bit CCIDX,48bit VA>
             Debug Features 0 =3D <2 CTX BKPTs,4 Watchpoints,6
Breakpoints,PMUv3,Debugv8>
             Debug Features 1 =3D <>
         Auxiliary Features 0 =3D <>
         Auxiliary Features 1 =3D <>
CPU  1: ARM Cortex-A72 r0p3 affinity:  1
CPU  2: ARM Cortex-A72 r0p3 affinity:  2
CPU  3: ARM Cortex-A72 r0p3 affinity:  3
WARNING: WITNESS option enabled, expect reduced performance.
WARNING:  was not properly dismounted
Warning: no time-of-day clock registered, system time will not be set
accurately
Setting hostuuid: 30303031-3030-3030-3165-653364373161.
Setting hostid: 0x3c744718.
No suitable dump device was found.
Starting file system checks:
/dev/ufs/rootfs: INCORRECT BLOCK COUNT I=3D4470 (8 should be 0) (CORRECTED)
/dev/ufs/rootfs: LINK COUNT DIR I=3D11  OWNER=3Droot MODE=3D40755
/dev/ufs/rootfs: SIZE=3D512 MTIME=3DDec 12 09:12 2019  COUNT 25 SHOULD BE 2=
4
(ADJUSTED)
/dev/ufs/rootfs: UNREF FILE I=3D4466  OWNER=3Droot MODE=3D100644
/dev/ufs/rootfs: SIZE=3D0 MTIME=3DDec 12 09:12 2019
 (CLEARED)
/dev/ufs/rootfs: UNREF FILE I=3D4469  OWNER=3Droot MODE=3D100644
/dev/ufs/rootfs: SIZE=3D0 MTIME=3DDec 12 09:12 2019
 (CLEARED)
/dev/ufs/rootfs: UNREF FILE I=3D4470  OWNER=3Droot MODE=3D100444
/dev/ufs/rootfs: SIZE=3D0 MTIME=3DDec 12 09:12 2019
 (CLEARED)
/dev/ufs/rootfs: UNREF FILE I=3D4501  OWNER=3Droot MODE=3D100600
/dev/ufs/rootfs: SIZE=3D4096 MTIME=3DDec 12 09:11 2019
 (CLEARED)
/dev/ufs/rootfs: SUMMARY INFORMATION BAD (SALVAGED)
/dev/ufs/rootfs: BLK(S) MISSING IN BIT MAPS (SALVAGED)
/dev/ufs/rootfs: 23639 files, 705985 used, 29178238 free (302 frags,
3647242 blocks, 0.0% fragmentation)
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Setting hostname: generic.
Setting up harvesting:
[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,AT=
TACH,CACHED
Feeding entropy: .
lo0: link state changed to UP
Starting Network: lo0.
lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3D680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
groups: lo
nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL>
Starting devd.
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp (X related).
Updating motd:.
Mounting late filesystems:.
Updating /var/run/os-release done.
Configuring vt: blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.

Thu Dec 12 09:13:14 UTC 2019

FreeBSD/arm64 (generic) (ttyu0)

login:

Kyle Evans <kevans@freebsd.org> =E4=BA=8E2019=E5=B9=B412=E6=9C=8817=E6=97=
=A5=E5=91=A8=E4=BA=8C =E4=B8=8A=E5=8D=8810:33=E5=86=99=E9=81=93=EF=BC=9A

> On Mon, Dec 16, 2019 at 8:30 PM ykla <yklaxds@gmail.com> wrote:
> > ykla <yklaxds@gmail.com> =E4=BA=8E 2019=E5=B9=B412=E6=9C=8817=E6=97=A5=
=E5=91=A8=E4=BA=8C =E4=B8=8A=E5=8D=8810:27=E5=86=99=E9=81=93=EF=BC=9A
> >> Kyle Evans <kevans@freebsd.org> =E4=BA=8E 2019=E5=B9=B412=E6=9C=8817=
=E6=97=A5=E5=91=A8=E4=BA=8C =E4=B8=8A=E5=8D=8810:04=E5=86=99=E9=81=93=EF=BC=
=9A
> >>>
> >>> On Mon, Dec 16, 2019 at 7:50 PM ykla <yklaxds@gmail.com> wrote:
> >>> >
> >>> > Hi, I download latest version 12.12 current 13 img and write in TF
> card.
> >>> > Then I download  rpi-firmware(2019-12-05 16:15:16) and extract and
> copy it
> >>> > in BOOT partition. And look at my screen shows me that stop boot on
> lo0
> >>> > state. I know it can't support USB/PCI/ethernet and I just want to
> install
> >>> > it. Thanks.
> >>>
> >>> That's a most curious failure mode... if you got to the point where
> >>> we're bringing up lo0, it should have either been fine or blown up
> >>> terribly in an obvious way -- I'll reimage tomorrow-ish based on the
> >>> latest snapshot and see if I can reproduce.
> >>>
> >>> In the meantime, can you post a transcript of the boot?
> >>>
> >>> Thanks,
> >>>
> >>> Kyle Evans
> >>
> >> New error: stopped at
> >> Warning: no time-of-day clock registered. system time will not be set
> accurately.
> >
> > I just reboot and bugs show:
> > lo0 :link state change to UP.
> >
>
> Can you scroll up to just above that sdhci output and take another
> picture? (above the =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D)
>
> Thanks,
>
> Kyle Evans
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2BPGaYDLDMwchHtm%2Be9X2SyQJu0hTmJrb6gE7ipZpS7WAj2SZQ>