Date: Sun, 31 Oct 2004 14:54:22 -0500 From: Brian Reichert <reichert@numachi.com> To: "Graaf, Rob" <graaf@Phys.LeidenUniv.nl> Cc: "'freebsd-mobile@freebsd.org'" <freebsd-mobile@freebsd.org> Subject: Re: usb2 under 5.2, how to use ehci Message-ID: <20041031195422.GJ82832@numachi.com> In-Reply-To: <A16923DE912AD411B0F800A024519D4C01E1811B@lion-msrvp.leidenuniv.nl> References: <A16923DE912AD411B0F800A024519D4C01E1811B@lion-msrvp.leidenuniv.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Oct 31, 2004 at 06:09:15PM +0100, Graaf, Rob wrote: > Hi, > > i'm running FreeBSD 5.2.1 (installed right-out-of-the-box) > and make use of a LaCie external harddisk which is connected > by usb. > > The usb driver used is uhci, but this supports only usb1, > which is not fast. > > How can I use ehci, which seems to support usb2? I went through this very same firedrill recently: <http://lists.freebsd.org/pipermail/freebsd-mobile/2004-August/004653.html>; After I put 'device ehci' in my kernal. my laptop-to-LaCie throughput was pretty good: # dd if=/dev/zero of=/new/junk bs=4k count=125000 125000+0 records in 125000+0 records out 512000000 bytes transferred in 58.722096 secs (8719035 bytes/sec) > Anybody can give me directions how replace the ehci? > > Thanks > > Rob de Graaf -- Brian Reichert <reichert@numachi.com> 37 Crystal Ave. #303 Daytime number: (603) 434-6842 Derry NH 03038-1713 USA BSD admin/developer at large
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041031195422.GJ82832>