Date: Tue, 06 Jan 2009 07:20:15 -0800 From: Mark Atkinson <atkin901@yahoo.com> To: freebsd-current@freebsd.org Subject: Re: FreeBSD 8: fails booting from slice ad8s1a Message-ID: <gjvsrf$1ei$1@ger.gmane.org> References: <4962A0D3.1010704@mail.zedat.fu-berlin.de> <CE8C8ECA-8F08-4CE5-994C-3950C8EDE8A6@mac.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Marcel Moolenaar wrote:
> On Jan 5, 2009, at 4:07 PM, O. Hartmann wrote:
>
>> Since January, 3rd my FreeBSD 8/amd64 box won't boot anymore. I have
>> buildworld the most recent sources. Symptomes: after loading and
>> booting
>> kernel,
>> booting suddenly stops and I'm getting prompted for defining the boot
>> slice like
>>
>> ufs:/dev/ad8s1a
>>
>> Typing '?' offers GEOM managed slices/partitions/devices. What
>> changed?
>
> GEOM_PART is default.
>
> What are the GEOM managed slices/partitions/devices listed?
>
I am having the same problem updating yesterday to Jan 5th -current sources
from a Nov 25 kernel. The old kernel boots and mounts find, the Jan 5th
kernel does not. The way mountroot fails hints that it's just probably
looking in the wrong place.
lsdev from the bootloader finds the filesystem and I can
boot /boot/kernel.old/kernel from here. But the mountroot fallback cannot
find the slice.
OK lsdev
cd devices:
disk devices:
disk0: BIOS drive C:
disk0s1a: FFS
disk0s1b: swap
pxe devices:
Full verbose boot, mountroot failure and slice/label info below:
OK boot -v -s
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009f800
SMAP type=02 base=000000000009f800 len=0000000000000800
SMAP type=02 base=00000000000dc000 len=0000000000024000
SMAP type=01 base=0000000000100000 len=000000003fd90000
SMAP type=03 base=000000003fe90000 len=000000000000d000
SMAP type=04 base=000000003fe9d000 len=0000000000063000
SMAP type=02 base=000000003ff00000 len=0000000000100000
SMAP type=02 base=00000000fec00000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000ff000000 len=0000000001000000
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #27: Mon Jan 5 14:48:48 PST 2009
root@pogo-1.f5test.net:/usr/obj/usr/src/sys/POGO
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc1045000.
Preloaded acpi_dsdt "/boot/DSDT.aml" at 0xc10451ac.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3192016720 Hz
CPU: Intel(R) Pentium(R) D CPU 3.20GHz (3192.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf44 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
AMD Features=0x20100000<NX,LM>
TSC: P-state invariant
Cores per package: 2
Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128 entries
Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
1st-level data cache: 16 KB, 8-way set associative, sectored cache, 64 byte
line size
Trace cache: 12K-uops, 8-way set associative
2nd-level cache: 1 MB, 8-way set associative, sectored cache, 64 byte line
size
L2 cache: 1024 kbytes, 8-way associative, 64 bytes/line
real memory = 1072234496 (1022 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001425000 - 0x000000003ed4afff, 1033003008 bytes (252198 pages)
avail memory = 1031671808 (983 MB)
Table 'FACP' at 0x3fe9cda9
Table 'ASF!' at 0x3fe9ce1d
Table 'SPCR' at 0x3fe9cee4
Table 'MCFG' at 0x3fe9cf34
Table 'APIC' at 0x3fe9cf70
MADT: Found table at 0x3fe9cf70
MP Configuration Table version 1.4 found at 0xc009fda1
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
ACPI APIC Table: <PTLTD APIC >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
bios32: Found BIOS32 Service Directory header at 0xc00f6080
bios32: Entry = 0xfd450 (c00fd450) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd450+0x1e3
pnpbios: Found PnP BIOS data at 0xc00f6110
pnpbios: Entry = f0000:a9fd Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP @ 0x0xf60d0/0x0014 (v 0 PTLTD )
ACPI: RSDT @ 0x0x3fe97360/0x0040 (v 1 PTLTD RSDT 0x06040000 LTP
0x00000000)
ACPI: FACP @ 0x0x3fe9cda9/0x0074 (v 1 INTEL 0x06040000 PTL
0x00000003)
ACPI: DSDT @ 0x0x3fe9775a/0x564F (v 1 INTEL GLENWOOD 0x06040000 MSFT
0x0100000E)
ACPI: FACS @ 0x0x3fe9dfc0/0x0040
ACPI: ASF! @ 0x0x3fe9ce1d/0x00C7 (v 32 ISM CETP 0x06040000 PTL
0x00000001)
ACPI: SPCR @ 0x0x3fe9cee4/0x0050 (v 1 PTLTD $UCRTBL$ 0x06040000 PTL
0x00000001)
ACPI: MCFG @ 0x0x3fe9cf34/0x003C (v 1 PTLTD MCFG 0x06040000 LTP
0x00000000)
ACPI: APIC @ 0x0x3fe9cf70/0x0068 (v 1 PTLTD APIC 0x06040000 LTP
0x00000000)
ACPI: BOOT @ 0x0x3fe9cfd8/0x0028 (v 1 PTLTD $SBFTBL$ 0x06040000 LTP
0x00000001)
ACPI: SSDT @ 0x0x3fe973a0/0x03BA (v 1 PmRef CpuPm 0x00003000 INTL
0x20030224)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000200 err: 0x00010000 pcm: 0x00000400
ath_rate: version 1.9 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Jan 5 2009
14:46:50)
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
ACPI: Table DSDT replaced by host OS
ACPI: DSDT @ 0x0/0x5634 (v 1 INTEL GLENWOOD 0x06040000 INTL 0x20051021)
PCIe: Memory Mapped configuration base @ 0xe0000000
pcibios: BIOS version 2.10
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc41b0000 pa 0x1000
AcpiOsDerivePciId: \_SB_.PCI0.REGS -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \_SB_.PCI0.LPC0.MMTO -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \_SB_.PCI0.LPC0.REGS -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \_SB_.PCI0.LPC0.PIRX -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \_SB_.PCI0.LPC0.PIRY -> bus 0 dev 31 func 0
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 3 10 11 14 15
Validation 0 255 N 0 3 10 11 14 15
After Disable 0 255 N 0 3 10 11 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 12 N 0 3 10 11 14 15
Validation 0 255 N 0 3 10 11 14 15
After Disable 0 255 N 0 3 10 11 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 10 11 14 15
Validation 0 11 N 0 3 10 11 14 15
After Disable 0 255 N 0 3 10 11 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 10 11 14 15
Validation 0 10 N 0 3 10 11 14 15
After Disable 0 255 N 0 3 10 11 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 10 11 14 15
Validation 0 255 N 0 3 10 11 14 15
After Disable 0 255 N 0 3 10 11 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 10 11 14 15
Validation 0 255 N 0 3 10 11 14 15
After Disable 0 255 N 0 3 10 11 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 10 11 14 15
Validation 0 255 N 0 3 10 11 14 15
After Disable 0 255 N 0 3 10 11 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 10 11 14 15
Validation 0 255 N 0 3 10 11 14 15
After Disable 0 255 N 0 3 10 11 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2778, revid=0x81
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2779, revid=0x81
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0100, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27d0, revid=0x01
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x27e0, revid=0x01
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x27e2, revid=0x01
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27c8, revid=0x01
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type I/O Port, range 32, base 0x3000, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x27c9, revid=0x01
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x3020, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x27ca, revid=0x01
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type I/O Port, range 32, base 0x3040, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x27cb, revid=0x01
domain=0, bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=7
map[20]: type I/O Port, range 32, base 0x3060, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27cc, revid=0x01
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd8500000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0xe1
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27b8, revid=0x01
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27df, revid=0x01
domain=0, bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type I/O Port, range 32, base 0x30a0, size 4, enabled
found-> vendor=0x8086, dev=0x27c0, revid=0x01
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x30e8, size 3, enabled
map[14]: type I/O Port, range 32, base 0x30dc, size 2, enabled
map[18]: type I/O Port, range 32, base 0x30e0, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x30d8, size 2, enabled
map[20]: type I/O Port, range 32, base 0x30b0, size 4, enabled
map[24]: type Memory, range 32, base 0xd8500400, size 10, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x27da, revid=0x01
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x1100, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x4000-0x4fff
pcib3: memory decode 0xd8000000-0xd80fffff
pcib3: no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x8086, dev=0x108b, revid=0x03
domain=0, bus=3, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xd8000000, size 17, enabled
pcib3: requested memory range 0xd8000000-0xd801ffff: good
map[18]: type I/O Port, range 32, base 0x4000, size 5, enabled
pcib3: requested I/O range 0x4000-0x401f: in range
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x4000-0x401f mem
0xd8000000-0xd801ffff irq 16 at device 0.0 on pci3
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8000000
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to vector 49
em0: using IRQ 256 for MSI
em0: Using MSI interrupt
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:13:d3:fe:04:f2
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x5000-0x5fff
pcib4: memory decode 0xd8100000-0xd81fffff
pcib4: no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
found-> vendor=0x8086, dev=0x108b, revid=0x00
domain=0, bus=4, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xd8100000, size 17, enabled
pcib4: requested memory range 0xd8100000-0xd811ffff: good
map[18]: type I/O Port, range 32, base 0x5000, size 5, enabled
pcib4: requested I/O range 0x5000-0x501f: in range
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 17
em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x5000-0x501f mem
0xd8100000-0xd811ffff irq 17 at device 0.0 on pci4
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8100000
em1: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 257 to vector 50
em1: using IRQ 257 for MSI
em1: Using MSI interrupt
em1: [FILTER]
em1: bpf attached
em1: Ethernet address: 00:13:d3:fe:04:f3
uhci0: <UHCI (generic) USB controller> port 0x3000-0x301f irq 23 at device
29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3000
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 51
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x3020-0x303f irq 19 at device
29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3020
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 52
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x3040-0x305f irq 18 at device
29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3040
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 53
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x3060-0x307f irq 16 at device
29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3060
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 54
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xd8500000-0xd85003ff
irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8500000
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib5: domain 0
pcib5: secondary bus 10
pcib5: subordinate bus 10
pcib5: I/O decode 0x6000-0x6fff
pcib5: memory decode 0xd8200000-0xd82fffff
pcib5: prefetched decode 0xd0000000-0xd7ffffff
pcib5: Subtractively decoded bridge.
pci10: <ACPI PCI bus> on pcib5
pci10: domain=0, physical bus=10
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x30a0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=51 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55
ata0: [MPSAFE]
ata0: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port
0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem
0xd8500400-0xd85007ff irq 19 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x30b0
atapci1: [MPSAFE]
atapci1: [ITHREAD]
pci0: child atapci1 requested type 4 for rid 0x24, but the BAR says it is an
memio
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x30e8
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x30dc
ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x30e0
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x30d8
ata3: reset tp1 mask=03 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
ata3: [MPSAFE]
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
uart0: [FILTER]
uart0: fast interrupt
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 57
uart1: [FILTER]
uart1: fast interrupt
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 58
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
est0: enabling SpeedStep
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 102d00000e23
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 102d00000e23
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ex_isa_identify()
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcafff,0xdc000-0xdffff,0xe0000-0xe17ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata1 failed to probe at port 0x170 irq 15 on isa0
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sn0: not probed (disabled)
uart2: not probed (disabled)
uart3: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 99750516 hz
Timecounter "TSC" frequency 3192016720 Hz quality -100
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
ata0: identify ch->devices=00010000
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH7 chip
acd0: setting UDMA33 on ICH7 chip
acd0: <SONY CD-RW/DVD-ROM CRX835E/KYK2> CDRW drive at ata0 as master
acd0: 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2: identify ch->devices=00000000
ata3: identify ch->devices=00000001
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: 76319MB <WDC WD800JD-22LSA0 06.01D06> at ata3-master SATA150
ad6: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad6
ad6: Intel check1 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
ad6: FreeBSD check1 failed
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 3 to local APIC 1
ioapic0: Assigning ISA IRQ 4 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning PCI IRQ 16 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 1
ioapic0: Assigning PCI IRQ 23 to local APIC 0
msi: Assigning MSI IRQ 256 to local APIC 1
msi: Assigning MSI IRQ 257 to local APIC 0
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad6s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ?
List of GEOM managed disk devices:
ad6b ad6a ad6 acd0
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:ad6a
Trying to mount root from ufs:ad6a
WARNING: / was not properly dismounted
/: mount pending error: blocks 8 files 1
Lookup of /dev for devfs, error: 20
exec /sbin/init: error 20
exec /sbin/oinit: error 20
exec /sbin/init.bak: error 20
exec /rescue/init: error 20
exec /stand/sysinstall: error 20
init: not found in
path /sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init:/stand/sysinstall
panic: no init
cpuid = 1
KDB: enter: panic
[thread pid 1 tid 100002 ]
Stopped at kdb_enter+0x3a: movl $0,kdb_why
db>
If I boot back to the old kernel, here's what the slice layout looks like:
# fdisk -v /dev/ad6
******* Working on device /dev/ad6 *******
parameters extracted from in-core disklabel are:
cylinders=155061 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=155061 heads=16 sectors/track=63 (1008 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 63, size 156296322 (76316 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 1023/ head 254/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
and what bsdlabel thinks:
# bsdlabel -A /dev/ad6
# /dev/ad6:
type: ESDI
disk: ad6s1
label:
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 155061
sectors/unit: 156301488
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # milliseconds
track-to-track seek: 0 # milliseconds
drivedata: 0
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 152205312 0 4.2BSD 2048 16384 28552
b: 4096176 152205312 swap
c: 156301488 0 unused 0 0 # "raw" part, don't
edit
--
Mark Atkinson
atkin901@yahoo.com
(!wired)?(coffee++):(wired);
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?gjvsrf$1ei$1>