Date: Fri, 6 Sep 2002 12:17:38 +0200 From: stanojr <stanojr@iserver.sk> To: freebsd-questions@freebsd.org Subject: can't assign resources problem Message-ID: <20020906121738.A30223@iserver.sk>
next in thread | raw e-mail | index | archive | help
hello
i have problem
my soundcard and network card don`t work.
in linux or windows i don`t have this problem.
the soundcard is soundblaster 32pnp and network card is 3c509 (etherlink III).
there is a second onboard soundcard (cmi8330), which i don`t use, but this isn`t work properly too
i try to set the io and irq manually on kernel, but the problem resist
i try to use the latest cvsupped stable kernel, but the problem resist
if i try to exec `ifconfig ep0 IP`, machine freeze (and ep1 don`t freeze machine, but
nothing is going out from network card, the LED is off)
please help and sorry my english is bad
stanojr@iserver.sk
there is a `dmesg` after boot:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-PRERELEASE #23: Wed Sep 4 14:29:51 CEST 2002
root@zombija:/usr/src/sys/compile/ZOMBIJA
Timecounter "i8254" frequency 1193433 Hz
Timecounter "TSC" frequency 334163032 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (334.16-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x660 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
avail memory = 126771200 (123800K bytes)
ccd0-3: Concatenated disk drivers
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc035dee2 (1000022)
VESA: ATI MACH64
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00f7ed0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Ali Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <AcerLabs M5247 PCI-PCI(AGP Supported) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdfffe000-0xdfffefff irq 9 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AcerLabs Aladdin ATA33 controller> port 0xffa0-0xffaf irq 0 at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <ATI Mach64-GP graphics accelerator> at 16.0 irq 0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ep0: <3Com 3C509-TP EtherLink III> at port 0x300-0x30f irq 10 on isa0
ep0: eeprom failed to come ready.
ep0: eeprom failed to come ready.
ep0: eeprom failed to come ready.
ep0: eeprom failed to come ready.
ep0: eeprom failed to come ready.
ep0: Ethernet address 00:00:00:00:00:00
pcm0: <CMI8330> at port 0x530-0x537,0x388-0x38f irq 11 drq 0 on isa0
unknown: <Audio> can't assign resources
unknown: <IDE> can't assign resources
unknown: <Game> can't assign resources
ep1: <3Com 3C509B-TP EtherLink III (PnP)> at port 0x210-0x21f irq 12 on isa0
ep1: Ethernet address 00:20:af:91:d3:55
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0400> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0a03> can't assign resources
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 8063MB <WDC AC28400R> [16383/16/63] at ata0-master UDMA33
ad1: 1222MB <QUANTUM FIREBALL1280A> [2484/16/63] at ata0-slave WDMA2
ad2: 1549MB <WDC AC31600H> [3148/16/63] at ata1-master WDMA2
acd0: CDROM <TOSHIBA CD-ROM XM-6602B> at ata1-slave PIO4
Mounting root from ufs:ad2s2a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020906121738.A30223>