Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 20 Oct 2014 18:58:46 +0000 (UTC)
From:      Xin LI <delphij@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-10@freebsd.org
Subject:   svn commit: r273341 - in stable/10/sys/cddl/contrib/opensolaris/uts/common/fs/zfs: . sys
Message-ID:  <201410201858.s9KIwkXf040300@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: delphij
Date: Mon Oct 20 18:58:45 2014
New Revision: 273341
URL: https://svnweb.freebsd.org/changeset/base/273341

Log:
  MFC r272504: MFV r272494:
  
  Make space_map_truncate() always do space_map_reallocate().  Without
  this, setting space_map_max_blksz would cause panic for existing pool,
  as dmu_objset_set_blocksize would fail if the object have multiple blocks.
  
  Illumos issues:
     5164 space_map_max_blksz causes panic, does not work
     5165 zdb fails assertion when run on pool with recently-enabled
  	spacemap_histogram feature

Modified:
  stable/10/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/metaslab.c
  stable/10/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/space_map.c
  stable/10/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/space_map.h
Directory Properties:
  stable/10/   (props changed)

Modified: stable/10/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/metaslab.c
==============================================================================
--- stable/10/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/metaslab.c	Mon Oct 20 18:53:54 2014	(r273340)
+++ stable/10/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/metaslab.c	Mon Oct 20 18:58:45 2014	(r273341)
@@ -77,7 +77,7 @@ SYSCTL_INT(_vfs_zfs, OID_AUTO, condense_
 /*
  * Condensing a metaslab is not guaranteed to actually reduce the amount of
  * space used on disk. In particular, a space map uses data in increments of
- * MAX(1 << ashift, SPACE_MAP_INITIAL_BLOCKSIZE), so a metaslab might use the
+ * MAX(1 << ashift, space_map_blksize), so a metaslab might use the
  * same number of blocks after condensing. Since the goal of condensing is to
  * reduce the number of IOPs required to read the space map, we only want to
  * condense when we can be sure we will reduce the number of blocks used by the
@@ -1491,10 +1491,12 @@ metaslab_fragmentation(metaslab_t *msp)
 		uint64_t txg = spa_syncing_txg(spa);
 		vdev_t *vd = msp->ms_group->mg_vd;
 
-		msp->ms_condense_wanted = B_TRUE;
-		vdev_dirty(vd, VDD_METASLAB, msp, txg + 1);
-		spa_dbgmsg(spa, "txg %llu, requesting force condense: "
-		    "msp %p, vd %p", txg, msp, vd);
+		if (spa_writeable(spa)) {
+			msp->ms_condense_wanted = B_TRUE;
+			vdev_dirty(vd, VDD_METASLAB, msp, txg + 1);
+			spa_dbgmsg(spa, "txg %llu, requesting force condense: "
+			    "msp %p, vd %p", txg, msp, vd);
+		}
 		return (ZFS_FRAG_INVALID);
 	}
 
@@ -1938,6 +1940,15 @@ metaslab_sync(metaslab_t *msp, uint64_t 
 
 	mutex_enter(&msp->ms_lock);
 
+	/*
+	 * Note: metaslab_condense() clears the space_map's histogram.
+	 * Therefore we must verify and remove this histogram before
+	 * condensing.
+	 */
+	metaslab_group_histogram_verify(mg);
+	metaslab_class_histogram_verify(mg->mg_class);
+	metaslab_group_histogram_remove(mg, msp);
+
 	if (msp->ms_loaded && spa_sync_pass(spa) == 1 &&
 	    metaslab_should_condense(msp)) {
 		metaslab_condense(msp, txg, tx);
@@ -1946,9 +1957,6 @@ metaslab_sync(metaslab_t *msp, uint64_t 
 		space_map_write(msp->ms_sm, *freetree, SM_FREE, tx);
 	}
 
-	metaslab_group_histogram_verify(mg);
-	metaslab_class_histogram_verify(mg->mg_class);
-	metaslab_group_histogram_remove(mg, msp);
 	if (msp->ms_loaded) {
 		/*
 		 * When the space map is loaded, we have an accruate

Modified: stable/10/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/space_map.c
==============================================================================
--- stable/10/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/space_map.c	Mon Oct 20 18:53:54 2014	(r273340)
+++ stable/10/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/space_map.c	Mon Oct 20 18:58:45 2014	(r273341)
@@ -38,15 +38,12 @@
 #include <sys/zfeature.h>
 
 /*
- * This value controls how the space map's block size is allowed to grow.
- * If the value is set to the same size as SPACE_MAP_INITIAL_BLOCKSIZE then
- * the space map block size will remain fixed. Setting this value to something
- * greater than SPACE_MAP_INITIAL_BLOCKSIZE will allow the space map to
- * increase its block size as needed. To maintain backwards compatibilty the
- * space map's block size must be a power of 2 and SPACE_MAP_INITIAL_BLOCKSIZE
- * or larger.
+ * The data for a given space map can be kept on blocks of any size.
+ * Larger blocks entail fewer i/o operations, but they also cause the
+ * DMU to keep more data in-core, and also to waste more i/o bandwidth
+ * when only a few blocks have changed since the last transaction group.
  */
-int space_map_max_blksz = (1 << 12);
+int space_map_blksz = (1 << 12);
 
 /*
  * Load the space map disk into the specified range tree. Segments of maptype
@@ -233,58 +230,6 @@ space_map_entries(space_map_t *sm, range
 	return (entries);
 }
 
-void
-space_map_set_blocksize(space_map_t *sm, uint64_t size, dmu_tx_t *tx)
-{
-	uint32_t blksz;
-	u_longlong_t blocks;
-
-	ASSERT3U(sm->sm_blksz, !=, 0);
-	ASSERT3U(space_map_object(sm), !=, 0);
-	ASSERT(sm->sm_dbuf != NULL);
-	VERIFY(ISP2(space_map_max_blksz));
-
-	if (sm->sm_blksz >= space_map_max_blksz)
-		return;
-
-	/*
-	 * The object contains more than one block so we can't adjust
-	 * its size.
-	 */
-	if (sm->sm_phys->smp_objsize > sm->sm_blksz)
-		return;
-
-	if (size > sm->sm_blksz) {
-		uint64_t newsz;
-
-		/*
-		 * Older software versions treat space map blocks as fixed
-		 * entities. The DMU is capable of handling different block
-		 * sizes making it possible for us to increase the
-		 * block size and maintain backwards compatibility. The
-		 * caveat is that the new block sizes must be a
-		 * power of 2 so that old software can append to the file,
-		 * adding more blocks. The block size can grow until it
-		 * reaches space_map_max_blksz.
-		 */
-		newsz = ISP2(size) ? size : 1ULL << highbit64(size);
-		if (newsz > space_map_max_blksz)
-			newsz = space_map_max_blksz;
-
-		VERIFY0(dmu_object_set_blocksize(sm->sm_os,
-		    space_map_object(sm), newsz, 0, tx));
-		dmu_object_size_from_db(sm->sm_dbuf, &blksz, &blocks);
-
-		zfs_dbgmsg("txg %llu, spa %s, increasing blksz from %d to %d",
-		    dmu_tx_get_txg(tx), spa_name(dmu_objset_spa(sm->sm_os)),
-		    sm->sm_blksz, blksz);
-
-		VERIFY3U(newsz, ==, blksz);
-		VERIFY3U(sm->sm_blksz, <, blksz);
-		sm->sm_blksz = blksz;
-	}
-}
-
 /*
  * Note: space_map_write() will drop sm_lock across dmu_write() calls.
  */
@@ -298,7 +243,7 @@ space_map_write(space_map_t *sm, range_t
 	range_seg_t *rs;
 	uint64_t size, total, rt_space, nodes;
 	uint64_t *entry, *entry_map, *entry_map_end;
-	uint64_t newsz, expected_entries, actual_entries = 1;
+	uint64_t expected_entries, actual_entries = 1;
 
 	ASSERT(MUTEX_HELD(rt->rt_lock));
 	ASSERT(dsl_pool_sync_context(dmu_objset_pool(os)));
@@ -324,13 +269,6 @@ space_map_write(space_map_t *sm, range_t
 
 	expected_entries = space_map_entries(sm, rt);
 
-	/*
-	 * Calculate the new size for the space map on-disk and see if
-	 * we can grow the block size to accommodate the new size.
-	 */
-	newsz = sm->sm_phys->smp_objsize + expected_entries * sizeof (uint64_t);
-	space_map_set_blocksize(sm, newsz, tx);
-
 	entry_map = zio_buf_alloc(sm->sm_blksz);
 	entry_map_end = entry_map + (sm->sm_blksz / sizeof (uint64_t));
 	entry = entry_map;
@@ -457,46 +395,48 @@ space_map_close(space_map_t *sm)
 	kmem_free(sm, sizeof (*sm));
 }
 
-static void
-space_map_reallocate(space_map_t *sm, dmu_tx_t *tx)
-{
-	ASSERT(dmu_tx_is_syncing(tx));
-
-	space_map_free(sm, tx);
-	dmu_buf_rele(sm->sm_dbuf, sm);
-
-	sm->sm_object = space_map_alloc(sm->sm_os, tx);
-	VERIFY0(space_map_open_impl(sm));
-}
-
 void
 space_map_truncate(space_map_t *sm, dmu_tx_t *tx)
 {
 	objset_t *os = sm->sm_os;
 	spa_t *spa = dmu_objset_spa(os);
 	dmu_object_info_t doi;
-	int bonuslen;
 
 	ASSERT(dsl_pool_sync_context(dmu_objset_pool(os)));
 	ASSERT(dmu_tx_is_syncing(tx));
 
-	VERIFY0(dmu_free_range(os, space_map_object(sm), 0, -1ULL, tx));
 	dmu_object_info_from_db(sm->sm_dbuf, &doi);
 
-	if (spa_feature_is_enabled(spa, SPA_FEATURE_SPACEMAP_HISTOGRAM)) {
-		bonuslen = sizeof (space_map_phys_t);
-		ASSERT3U(bonuslen, <=, dmu_bonus_max());
-	} else {
-		bonuslen = SPACE_MAP_SIZE_V0;
-	}
-
-	if (bonuslen != doi.doi_bonus_size ||
-	    doi.doi_data_block_size != SPACE_MAP_INITIAL_BLOCKSIZE) {
+	/*
+	 * If the space map has the wrong bonus size (because
+	 * SPA_FEATURE_SPACEMAP_HISTOGRAM has recently been enabled), or
+	 * the wrong block size (because space_map_blksz has changed),
+	 * free and re-allocate its object with the updated sizes.
+	 *
+	 * Otherwise, just truncate the current object.
+	 */
+	if ((spa_feature_is_enabled(spa, SPA_FEATURE_SPACEMAP_HISTOGRAM) &&
+	    doi.doi_bonus_size != sizeof (space_map_phys_t)) ||
+	    doi.doi_data_block_size != space_map_blksz) {
 		zfs_dbgmsg("txg %llu, spa %s, reallocating: "
 		    "old bonus %u, old blocksz %u", dmu_tx_get_txg(tx),
 		    spa_name(spa), doi.doi_bonus_size, doi.doi_data_block_size);
-		space_map_reallocate(sm, tx);
-		VERIFY3U(sm->sm_blksz, ==, SPACE_MAP_INITIAL_BLOCKSIZE);
+
+		space_map_free(sm, tx);
+		dmu_buf_rele(sm->sm_dbuf, sm);
+
+		sm->sm_object = space_map_alloc(sm->sm_os, tx);
+		VERIFY0(space_map_open_impl(sm));
+	} else {
+		VERIFY0(dmu_free_range(os, space_map_object(sm), 0, -1ULL, tx));
+
+		/*
+		 * If the spacemap is reallocated, its histogram
+		 * will be reset.  Do the same in the common case so that
+		 * bugs related to the uncommon case do not go unnoticed.
+		 */
+		bzero(sm->sm_phys->smp_histogram,
+		    sizeof (sm->sm_phys->smp_histogram));
 	}
 
 	dmu_buf_will_dirty(sm->sm_dbuf, tx);
@@ -535,7 +475,7 @@ space_map_alloc(objset_t *os, dmu_tx_t *
 	}
 
 	object = dmu_object_alloc(os,
-	    DMU_OT_SPACE_MAP, SPACE_MAP_INITIAL_BLOCKSIZE,
+	    DMU_OT_SPACE_MAP, space_map_blksz,
 	    DMU_OT_SPACE_MAP_HEADER, bonuslen, tx);
 
 	return (object);

Modified: stable/10/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/space_map.h
==============================================================================
--- stable/10/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/space_map.h	Mon Oct 20 18:53:54 2014	(r273340)
+++ stable/10/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/space_map.h	Mon Oct 20 18:58:45 2014	(r273341)
@@ -133,17 +133,6 @@ typedef enum {
 	SM_FREE
 } maptype_t;
 
-/*
- * The data for a given space map can be kept on blocks of any size.
- * Larger blocks entail fewer i/o operations, but they also cause the
- * DMU to keep more data in-core, and also to waste more i/o bandwidth
- * when only a few blocks have changed since the last transaction group.
- * Rather than having a fixed block size for all space maps the block size
- * can adjust as needed (see space_map_max_blksz). Set the initial block
- * size for the space map to 4k.
- */
-#define	SPACE_MAP_INITIAL_BLOCKSIZE	(1ULL << 12)
-
 int space_map_load(space_map_t *sm, range_tree_t *rt, maptype_t maptype);
 
 void space_map_histogram_clear(space_map_t *sm);



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201410201858.s9KIwkXf040300>