Date: Sat, 31 Mar 2018 18:12:12 +0000 From: Chris <syseng@gfsys.co.uk> To: freebsd-xen@freebsd.org Subject: Re: [Bug 224003] xen kernel panics Message-ID: <5ABFCF7C.1050903@gfsys.co.uk> In-Reply-To: <201803301805.w2UI531x069099@pdx.rh.CN85.dnsmgr.net> References: <201803301805.w2UI531x069099@pdx.rh.CN85.dnsmgr.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 03/30/18 18:05, Rodney W. Grimes wrote:
> I can affirm that a E56xx cpu should be very capable of supporting Xen.
> CPU: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz (3059.07-MHz K8-class CPU)
> Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
> AMD Features2=0x1<LAHF>
> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
> TSC: P-state invariant, performance statistics
>
Rodney,
Thanks for that and that test does confirm the DMAP table.
Built xen from source yesterday, which pulls in a gcc build and
loads of warnings during that and the build of various other
packages, but when rebooting, am getting a stack underflow at
the boot screen. Probably a typo in one of the config files,
but they look ok, so include the config files below. Haven't
defined any networking yet, as gettng the bare kernel
running must be the first step. A bit like bringing up a
an embedded system board from bare metal, though far more
complex.
Building from source and getting the same error suggests it's
nothing out of sync, packages etc, put the disk aside and
reinstalled the os and xen from scratch on another disk, to
get a fresh start. It's a slightly later iso image,
31-July-2017. Still panics, with the following boot log via
the serial port com 1. Sorry, lots of it, some line lengths
edited:-
-----------------------------------------------------------
ProLiant System BIOS - P67 (01/30/2011)
Copyright 1982, 2011 Hewlett-Packard Development Company, L.P.
32 GB Installed 1 Processor(s) detected, 6 total cores enabled,
Hyperthreading is disabled
Proc 1: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz
QPI Speed: 5.8 GT/s
HP Power Profile Mode: Balanced Power and Performance
Power Regulator Mode: Dynamic Power Savings
Advanced Memory Protection Mode: Advanced ECC Support
Redundant ROM Detected - This system contains a valid backup
system ROM.
Inlet Ambient Temperature: 13C/55F
<snipped>
Setup Utility
Press "F10" key for System Maintenance Menu
Press "F11" key for Default Boot Override Options
Press "F12" key for Network Boot
For access via BIOS Serial Console
Press "ESC+9" for ROM-Based Setup Utility
Press "ESC+0" for System Maintenance Menu
Press "ESC+!" for Default Boot Override Options
Press "ESC+@" for Network Boot
Attempting Boot From CD-ROM
Attempting Boot From Hard Drive (C:)-\|/- <etc>
Consoles: internal video/keyboard BIOS drive A: is
disk0BIOS
drive C: is disk1BIOS drive D: is disk2BIOS drive
E: is disk3BIOS
637kB/3396796kB available memory
FreeBSD/x86 bootstrap loader, Revision 1.1(Fri Jul 21
02:03:08 UTC 2017
root@releng2.nyi.freebsd.org)|/-\|/- <etc>
Loading /boot/defaults/loader.conf/-\|/- <etc>
<Beast Image>
stack underflow message ???
\|/-(XEN) Bad console= option '' ???
Xen 4.7.2
(XEN) Xen version 4.7.2 (root@) (FreeBSD clang version 4.0.0
(tags/RELEASE_400/final 297347) (based on LLVM 4.0.0))
debug=n Thu Mar 15 18:36:39 UTC 2018
(XEN) Latest ChangeSet:
(XEN) Bootloader: FreeBSD Loader
(XEN) Command line: dom0_mem=2048M dom0_max_vcpus=6
dom0pvh=1 console=com1, vga com1=115200,8n1
guest_loglvl=all loglvl=all
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 3 MBR signatures
(XEN) Found 3 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f400 (usable)
(XEN) 000000000009f400 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cf62f000 (usable)
(XEN) 00000000cf62f000 - 00000000cf63c000 (ACPI data)
(XEN) 00000000cf63c000 - 00000000cf63d000 (usable)
(XEN) 00000000cf63d000 - 00000000d4000000 (reserved)
(XEN) 00000000fec00000 - 00000000fee10000 (reserved)
(XEN) 00000000ff800000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000082ffff000 (usable)
(XEN) ACPI: RSDP 000F4F00, 0024 (r2 HP )
(XEN) ACPI: XSDT CF630340, 00BC (r1 HP ProLiant 2 Ò 162E)
(XEN) ACPI: FACP CF630440, 00F4 (r3 HP ProLiant 2 Ò 162E)
(XEN) ACPI: DSDT CF630540, 20BD (r1 HP DSDT 1 INTL 20030228)
(XEN) ACPI: FACS CF62F100, 0040
(XEN) ACPI: SPCR CF62F140, 0050 (r1 HP SPCRRBSU 1 Ò 162E)
(XEN) ACPI: MCFG CF62F1C0, 003C (r1 HP ProLiant 1 0)
(XEN) ACPI: HPET CF62F200, 0038 (r1 HP ProLiant 2 Ò 162E)
(XEN) ACPI: FFFF CF62F240, 0064 (r2 HP ProLiant 2 Ò 162E)
(XEN) ACPI: SPMI CF62F2C0, 0040 (r5 HP ProLiant 1 Ò 162E)
(XEN) ACPI: ERST CF62F300, 01D0 (r1 HP ProLiant 1 Ò 162E)
(XEN) ACPI: APIC CF62F500, 015E (r1 HP ProLiant 2 0)
(XEN) ACPI: SRAT CF62F680, 0570 (r1 HP Proliant 1 Ò 162E)
(XEN) ACPI: FFFF CF62FC00, 0176 (r1 HP ProLiant 1 Ò 162E)
(XEN) ACPI: BERT CF62FD80, 0030 (r1 HP ProLiant 1 Ò 162E)
(XEN) ACPI: HEST CF62FDC0, 00BC (r1 HP ProLiant 1 Ò 162E)
(XEN) ACPI: DMAR CF62FE80, 0168 (r1 HP ProLiant 1 Ò 162E)
(XEN) ACPI: SSDT CF632600, 0125 (r3 HP CRSPCI0 2 HP 1)
(XEN) ACPI: SSDT CF632740, 0255 (r3 HP riser1a 2 INTL 20061109)
(XEN) ACPI: SSDT CF6329C0, 025D (r3 HP riser2a 2 INTL 20061109)
(XEN) ACPI: SSDT CF632C40, 03BB (r1 HP pcc 1 INTL 20090625)
(XEN) ACPI: SSDT CF633000, 0377 (r1 HP pmab 1 INTL 20090625)
(XEN) ACPI: SSDT CF633380, 105C (r1 INTEL PPM RCM 1 INTL 20061109)
(XEN) System RAM: 32757MB (33543992kB)
(XEN) SRAT: PXM 0 -> APIC 00 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 02 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 04 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 10 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 12 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 14 -> Node 0
(XEN) SRAT: Node 0 PXM 0 0-d0000000
(XEN) SRAT: Node 0 PXM 0 100000000-830000000
(XEN) NUMA: Using 20 for the hash shift.
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f4f80
(XEN) DMI 2.7 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x908
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:904,1:0], pm1x_evt[1:900,1:0]
(XEN) ACPI: wakeup_vec[cf62f10c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x16] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) Failed to get Error Log Address Range.
(XEN) HEST: Table parsing has been initialized
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 32 CPUs (26 hotplug CPUs)
(XEN) IRQ limits: 48 GSI, 1120 MSI/MSI-X
(XEN) Intel machine check reporting enabled
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2399.372 MHz processor.
(XEN) Initing memory sharing.
(XEN) alt table ffff82d0802bf2f0 -> ffff82d0802bfc44
(XEN) PCI: MCFG configuration 0: base d0000000 segment 0000 buses 00 - 3f
(XEN) PCI: MCFG area at d0000000 reserved in E820
(XEN) PCI: Using MCFG for segment 0000 bus 00-3f
(XEN) [VT-D]Disabling IOMMU due to Intel 5500/5520/X58 Chipset errata
#47, #53
(XEN) I/O virtualisation disabled
(XEN) nr_sockets: 5
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 64 KiB.
(XEN) mwait-idle: MWAIT substates: 0x1120
(XEN) mwait-idle: v0.4.1 model 0x2c
(XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Brought up 6 CPUs
(XEN) ACPI sleep modes: S3
(XEN) VPMU: disabled
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Dom0 has maximum 624 PIRQs
(XEN) NX (Execute Disable) protection active
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 -> 0x1e90da0
(XEN) Dom0 symbol map 0x1e90da0 -> 0x2167b80
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000814000000->0000000818000000 (507901 pages
to be allocated)
(XEN) Init. ramdisk: 000000082fdfd000->000000082fe00000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff82167b80
(XEN) Init. ramdisk: ffffffff82168000->ffffffff8216b000
(XEN) Phys-Mach map: ffffffff8216b000->ffffffff8256b000
(XEN) Start info: ffffffff8256b000->ffffffff8256c4b4
(XEN) Page tables: ffffffff8256d000->ffffffff82584000
(XEN) Boot stack: ffffffff82584000->ffffffff82585000
(XEN) TOTAL: ffffffff80000000->ffffffff82800000
(XEN) ENTRY ADDRESS: ffffffff80ec8000
(XEN) Dom0 has maximum 6 VCPUs
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) Presently, iommu must be enabled for PVH hardware domain
(XEN)
(XEN) ****************************************
(XEN)
(XEN) Reboot in five seconds...
Included kernel debugging with this install. No idea how to
drive that though.
Hope this is some use and thanks again for the help with this...
Regards,
Chris
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5ABFCF7C.1050903>