Date: Mon, 25 May 1998 08:59:05 +1000 From: Natalia Salzberg <natalia@stn-atlas.com.au> To: djv@bedford.net Cc: freebsd-questions@FreeBSD.ORG Subject: Re: internal PnP Modem under FreeBSD 2.2.6 Message-ID: <3568A639.41C6@stn-atlas.com.au> References: <199805220510.BAA13148@lucy.bedford.net>
next in thread | previous in thread | raw e-mail | index | archive | help
CyberPeasant wrote: > > Natalia Salzberg wrote: > > Dear All, > > > > I have a Pentuim II 266MHz running FreeBSD 2.2.6 on one partition and > > Win95 on another with an internal pnp modem (CommWave 336) on a isa slot > > > > I can get the kernel to see it but I dont know how to access the actual > > device... > > I set the modem to have irq 9 and port 0x2e8 (com4 type settings) but > > I cant seem to talk to the modem using /dev/cuaa3 (i tried this using > > tip to talk to the modem directly) > > I have attached the output from 'dmesg' too > > I hope someone corrects me if I'm wrong, but I believe you will > need to rebuild the kernel, activating the sio2 and sio3 devices. > You may need to add a line "controller pnp0" to the > kernel config file, as well. > the modem is on sio3 (irq 9 port 0x2e8) and 'controller pnp0' is also compiled in the kernel...i didnt activate sio2 because there is no such thing as sio2 on this machine (sio0 is where the mouse is, sio1 is spare, and sio3 is where the modem is (bios set)) > > > > chip2 <Intel 82371AB PCI-ISA bridge> rev 1 on pci0:2:0 > > chip3 <Intel 82371AB IDE interface> rev 1 on pci0:2:1 > > chip4 <Intel 82371AB USB interface> rev 1 int d irq 11 on pci0:2:2 > > chip5 <Intel 82371AB Power management controller> rev 1 on pci0:2:3 > > vga0 <VGA-compatible display device> rev 84 int a irq 12 on pci0:13:0 > > Probing for devices on PCI bus 1: > > Probing for PnP devices: > > CSN 1 Vendor ID: ESS1868 [0x68187316] Serial 0xffffffff > > CSN 2 Vendor ID: PCP2880 [0x80287040] Serial 0x01000000 > > sio4: probe failed > > sio4 (siopnp <PCP2880> sn 0x01000000) at 0x2e8 irq 9 drq -1 flags 0x0 id 20 > > Is this a probe on the PCI bus? > > > Probing for devices on the ISA bus: > > sc0 at 0x60-0x6f irq 1 on motherboard > > sc0: VGA color <16 virtual consoles, flags=0x0> > > ed0 not found at 0x280 > > fe0 not found at 0x300 > > sio0 at 0x3f8-0x3ff irq 4 on isa > > sio0: type 16550A > > sio1 at 0x2f8-0x2ff irq 3 on isa > > sio1: type 16550A > > Shouldn't the modem have been found /here/? i thought it should! -- Natalia Salzberg STN Atlas (Australia): mailto:natalia@stn-atlas.com.au UTS Programmer's Society: mailto:natalia@progsoc.uts.edu.au To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3568A639.41C6>