Date: Sun, 17 Jan 1999 20:53:31 +0100 (CET) From: Johan Larsson <gozer@ludd.luth.se> To: Randy Bush <randy@psg.com> Cc: freebsd-multimedia@FreeBSD.ORG Subject: Re: no sound with fxtv Message-ID: <Pine.NEB.4.05.9901172051410.8407-100000@speedy.ludd.luth.se> In-Reply-To: <m101wbU-0008G6C@rip.psg.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 17 Jan 1999, Randy Bush wrote: > in fxtv, i am still trying to sort out how to get sound from the video card > through the sound card. > > current of 98.12.31 > o hauppauge wintv plugged into cable > o awe-64 > o matrox millennium ii agp > > i suspect that the problem is really on the video card, or the bt drivers. > > o the awe-64 works fine with vat in multicast, as does the hauppauge with > a camera in vic. > > o i have the line-out of the hauppauge plugged into the line-in of the > awe-64 > > o in fxtv, when i switch channels or change audio input select, i hear a > click through the speakers > I am seeing the exact same behaviour here. But that's with a bt878 and an AOpen aw35 soundcard. I have absolutely no clue what's wrong :/ I hope someone can tell us =P > i have tried with luigi's drivers and snd (thanks Daniel Aaron Meyer > <meyerd1@fang.cs.sunyit.edu>). > > clues solicited. > > randy > > > FreeBSD 3.0-CURRENT #0: Sat Jan 9 11:05:57 PST 1999 > root@rip.psg.com:/usr/src/sys/compile/RIP > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 300682774 Hz > CPU: Pentium II (quarter-micron) (300.68-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x651 Stepping=1 > Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>> > real memory = 134217728 (131072K bytes) > config> quit > avail memory = 128040960 (125040K bytes) > Probing for devices on PCI bus 0: > chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0 > chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0 > chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.4.0 > chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3 > ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 15 on pci0.6.0 > ahc0: aic > 7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs > fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 15 on pci0.9.0 > fxp0: Ethernet address 00:a0:c9:df:c8:4e > bktr0: <BrookTree 878> rev 0x02 int a irq 10 on pci0.10.0 > bti2c0: <bt848 Hard/Soft I2C controller> > iicbb0: <I2C generic bit-banging driver> on bti2c0 > iicbus0: <Philips I2C bus> on iicbb0 master-only > Probing for devices on iicbus0: <80> <81> <a0> <a1> <c2> <c3> > smbus0: <System Management Bus> on bti2c0 > smb0: <SMBus general purpose I/O> on smbus0 > Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner. > Probing for devices on PCI bus 1: > vga0: <Matrox model 051f graphics accelerator> rev 0x00 int a irq 11 on pci1.0.0 > Probing for PnP devices: > CSN 1 Vendor ID: CTL00c3 [0xc3008c0e] Serial 0x1fd0a682 Comp ID: PNPb02f [0x2fb0d041] > pcm1 (SB16pnp <SB16 PnP> sn 0x1fd0a682) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa > Probing for devices on the ISA bus: > sc0 at 0x60-0x6f irq 1 on motherboard > sc0: VGA color <16 virtual consoles, flags=0x0> > sio0 at 0x3f8-0x3ff i > rq 4 flags 0x10 on isa > sio0: type 16550A > sio1 at 0x2f8-0x2ff irq 3 on isa > sio1: type 16550A > psm0 at 0x60-0x64 irq 12 on motherboard > psm0: model Generic PS/2 mouse, device ID 0 > pcm0 not probed due to drq conflict with pcm1 at 1 > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > fdc0: FIFO enabled, 8 bytes threshold > fd0: 1.44MB 3.5in > wl0 at 0x300-0x30f irq 7 on isa > wl0: address 08:00:6a:2b:dd:a7, NWID 0xaaaa > npx0 on motherboard > npx0: INT 16 interface > ccd0-5: Concatenated disk drivers > Waiting 15 seconds for SCSI devices to settle > changing root device to da0s1a > da1 at ahc0 bus 0 target 1 lun 0 > da1: <SEAGATE ST34573LW 5702> Fixed Direct Access SCSI-2 device > da1: 80.0MB/s transfers (40.0MHz, offset 15, 16bit), Tagged Queueing Enabled > da1: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) > da0 at ahc0 bus 0 target 0 lun 0 > da0: <SEAGATE ST34573LW 5702> Fixed Direct Access SCSI-2 device > da0: 80.0MB/s transfers (40.0MHz, offset 15, 16bit), Tagged Queueing Enabled > da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) > cd0 at ah > c0 bus 0 target 4 lun 0 > cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device > cd0: 20.0MB/s transfers (20.0MHz, offset 16) > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-multimedia" in the body of the message > > Johan -- * mailto:gozer@ludd.luth.se * http://www.ludd.luth.se/users/gozer/ * * Powered by FreeBSD. http://www.se.freebsd.org/ +-+-+-+-+-+-+-+-+ * To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.NEB.4.05.9901172051410.8407-100000>