Date: Tue, 23 Mar 1999 20:02:56 -0800 From: Amancio Hasty <hasty@rah.star-gate.com> To: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp> Cc: current@freebsd.org, nick.hibma@jrc.it Subject: Re: usb keyboard? Message-ID: <199903240402.UAA68013@rah.star-gate.com> In-Reply-To: Your message of "Wed, 24 Mar 1999 09:36:49 %2B0900." <199903240036.JAA16932@zodiac.mech.utsunomiya-u.ac.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
Cool !
kbdcontrol -k /dev/kbd1 < /dev/ttyv0
Appears to work 8)
Now I have to figure out how to add support for my mouse. Got no clue what
protocol does it use . All I know is that is Macally USB mouse is going to be
fun hunting for the mouse protocol 8)
Enclosed is the output of dmesg:
Enjoy,
Amancio
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #5: Wed Mar 24 19:42:30 PST 1999
root@muadib.star-gate.com:/usr/src/sys/compile/CIOLOCO
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 451025177 Hz
CPU: Pentium III (451.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x672 Stepping=2
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,P
AT,PSE36,<b18>,MMX,FXSR,<b25>>
real memory = 134217728 (131072K bytes)
avail memory = 127070208 (124092K bytes)
Preloaded elf kernel "kernel" at 0xc0347000.
Preloaded splash_image_data "/boot/matrix.bmp" at 0xc034709c.
Preloaded elf module "vesa.ko" at 0xc03470ec.
Preloaded elf module "splash_bmp.ko" at 0xc0347188.
VESA: v0.20, 2560k memory, flags:0x731e0000, mode table:0xc0d78022 (50c000)
VESA: NVidia
module_register_init: module_register(splash_bmp, c03435dc, 0) error 19
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
uhci0: <Intel 82371AB/EB (PIIX4) USB Host Controller> rev 0x01 int d irq 10 on
pci0.7.2
usb0: USB version 1.0, interrupting at 10
intpm0: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
intpm0: I/O mapped 5000 ALLOCED IRQ 0 intr IRQ 9 enabled revision 0
intsmb0: <Intel PIIX4 SMBUS Interface>
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 4000
bktr0: <BrookTree 848> rev 0x11 int a irq 11 on pci0.15.0
bti2c0: <bt848 Hard/Soft I2C controller>
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus1: <System Management Bus> on iicsmb0
smb1: <SMBus general purpose I/O> on smbus1
iic0: <I2C general purpose I/O> on iicbus0
smbus2: <System Management Bus> on bti2c0
smb2: <SMBus general purpose I/O> on smbus2
Hauppauge WinCast/TV, Philips NTSC tuner, dbx stereo.
pn0: <82c168/82c169 PNIC 10/100BaseTX> rev 0x20 int a irq 11 on pci0.20.0
pn0: Ethernet address: 00:a0:cc:40:f0:5f
pn0: autoneg complete, link status good (half-duplex, 10Mbps)
Probing for devices on PCI bus 1:
vga0: <VGA-compatible display device> rev 0x04 int a irq 11 on pci1.0.0
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
kbd0 at atkbd0
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa
wdc0: unit 0 (wd0): <Maxtor 90845D4>, DMA, 32-bit, multi-block-16
wd0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (atapi): <ATAPI 40X CDROM DRIVE/VER-3.4A>, removable, accel, dma,
iordis
wdc0: ATAPI CD-ROMs not configured
wdc1 not found at 0x170
ppc0 at 0x378 irq 7 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus 0
ppi0: <generic parallel i/o> on ppbus 0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
usbd_match
usb0: <Intel 82371AB/EB (PIIX4) USB Host Controller>
usbd_attach
usbd_new_device bus=0xc0d7c000 depth=0 lowspeed=0
usbd_new_device: adding unit addr=1, rev=100, class=9, subclass=0, protocol=0,
maxpacket=64, ls=0
usbd_new_device: new dev (addr 1), dev=0xc0d87e00, parent=0xc0d82c40
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
usbd_set_config_index: (addr 1) attr=0x40, selfpowered=1, power=0, powerquirk=0
usbd_set_config_index: set config 1
usbd_set_config_index: setting new config 1
uhub0: 2 ports with 2 removable, self powered
usbd_init_port: adding hub port=1 status=0x0301 change=0x0001
usbd_init_port: adding hub port=2 status=0x0301 change=0x0001
uhub_explore: status change hub=1 port=1
usbd_new_device bus=0xc0d7c000 depth=1 lowspeed=512
usbd_new_device: adding unit addr=2, rev=100, class=0, subclass=0, protocol=0,
maxpacket=8, ls=1
usbd_new_device: new dev (addr 2), dev=0xc0d87b00, parent=0xc0d75be0
usbd_probe_and_attach: no device specific driver found
usbd_set_config_index: (addr 2) attr=0x80, selfpowered=0, power=100,
powerquirk=0
usbd_set_config_index: set config 1
usbd_set_config_index: setting new config 1
ums0
ums0: vendor 0x0618 product 0x0101, rev 1.00/0.14, addr 2, iclass 3/1
ums0: 6 buttons and Z dir.
ums_attach: sc=0xc0d96400
ums_attach: X 8/8
ums_attach: Y 8/8
ums_attach: Z 24/8
ums_attach: B1 0/1
ums_attach: B2 1/1
ums_attach: B3 2/1
ums_attach: B4 3/1
ums_attach: B5 4/1
ums_attach: B6 5/1
ums_attach: size=4, id=0
uhub_explore: status change hub=1 port=2
usbd_new_device bus=0xc0d7c000 depth=1 lowspeed=512
usbd_new_device: adding unit addr=3, rev=100, class=0, subclass=0, protocol=0,
maxpacket=8, ls=1
usbd_new_device: new dev (addr 3), dev=0xc0d87980, parent=0xc0d75be0
usbd_probe_and_attach: no device specific driver found
usbd_set_config_index: (addr 3) attr=0xa0, selfpowered=0, power=100,
powerquirk=0
usbd_set_config_index: set config 1
usbd_set_config_index: setting new config 1
ukbd0
ukbd0: Microsoft product 0x000b, rev 1.00/1.04, addr 3, iclass 3/1
ukbd:set_leds: state=0xc029b0b0 leds=0
kbd1 at ukbd0
changing root device to wd0s1a
ffs_mountfs: superblock updated for soft updates
ukbd:set_leds: state=0xc029b0b0 leds=1
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199903240402.UAA68013>