Date: Fri, 19 Apr 2002 06:56:56 +0800 From: weeguan@hem.passagen.se (Lim Wee Guan) To: questions@freebsd.org Subject: Adaptec 3940UWD -- No BIOS banner at Boot Message-ID: <20020419065656.A477@nexus>
next in thread | raw e-mail | index | archive | help
Hello all,
I have just put a Adaptec 3940UWD (AIC-7880 based) into my PIII-550
running on an ASUS P3BF mainboard. The card works fine in FreeBSD and
Windows once the OS has taken control, but on the machines I have
tried it on, there is no Adaptec BIO banner at the boot time, and as a
result, the system cannot be booted via this card.
I have tried everything from flashing up my M/B BIOS to trying every
option in the BIOS config.
I understand that this is not really FreeBSD related, as the problem
occurs before it even starts, but I'm grasping at straws here... ;)
Many thanks in advance.
The dmesg are appended below:
host> dmesg | grep ahc
ahc0: <Adaptec 3940 Ultra SCSI adapter> port 0xa800-0xa8ff mem 0xd3800000-0xd380
0fff irq 11 at device 4.0 on pci2
ahc1: <Adaptec 3940 Ultra SCSI adapter> port 0xa400-0xa4ff mem 0xd3000000-0xd300
0fff irq 10 at device 5.0 on pci2
da1 at ahc0 bus 0 target 4 lun 0
host> dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Sat Apr 13 18:57:32 SGT 2002
weeguan@host.org:/usr/src/sys/compile/HOST
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (551.25-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073725440 (1048560K bytes)
avail memory = 1041301504 (1016896K bytes)
Preloaded elf kernel "kernel" at 0xc03c2000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00f0e80
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Intel PIIX4 ATA controller> at 4.1
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 4.2
chip0: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x1229) at 9.0 irq 14
pci0: <unknown card> (vendor=0x8086, dev=0x1229) at 10.0 irq 15
dpt0: <DPT Caching SCSI RAID Controller> port 0xb400-0xb41f irq 10 at device 11.0 on pci0
dpt0: DPT PM2044UW FW Rev. 07H1, 1 channel, 64 CCBs
pcib2: <DEC 21050 PCI-PCI bridge> at device 12.0 on pci0
pci2: <PCI bus> on pcib2
ahc0: <Adaptec 3940 Ultra SCSI adapter> port 0xa800-0xa8ff mem 0xd3800000-0xd3800fff irq 11 at device 4.0 on pci2
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec 3940 Ultra SCSI adapter> port 0xa400-0xa4ff mem 0xd3000000-0xd3000fff irq 10 at device 5.0 on pci2
aic7880: Ultra Wide Channel B, SCSI Id=7, 16/255 SCBs
orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xd0000-0xd17ff,0xd4000-0xd57ff,0xd8000-0xd8fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 4MP> HP ENHANCED PCL5,PJL,POSTSCRIPT
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pca0 at port 0x40 on isa0
sbc0: <Creative ViBRA16C> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
pcm0: <SB16 DSP 4.13> on sbc0
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.20 initialized. Default = block all, Logging = enabled
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at dpt0 bus 0 target 0 lun 0
da0: <IBM DCAS-32160W S65A> Fixed Direct Access SCSI-2 device
da0: 2063MB (4226213 512 byte sectors: 255H 63S/T 263C)
cd0 at dpt0 bus 0 target 3 lun 0
cd0: <MATSHITA CD-ROM CR-8005 2.0d> Removable CD-ROM SCSI-2 device
cd0: Attempt to query device size failed: NOT READY, Medium not present
da1 at ahc0 bus 0 target 4 lun 0
da1: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
module_register: module miibus/ukphy already exists!
linker_file_sysinit "miibus.ko" failed to register! 17
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd000-0xd03f mem 0xd5000000-0xd50fffff,0xd5800000-0xd5800fff irq 14 at device 9.0 on pci0
fxp0: Ethernet address 00:02:b3:36:eb:c4
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xb800-0xb83f mem 0xd4000000-0xd401ffff,0xd4800000-0xd4800fff irq 15 at device 10.0 on pci0
fxp1: Ethernet address 00:02:b3:3c:bd:7c
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
module_register: module netgraph already exists!
linker_file_sysinit "netgraph.ko" failed to register! 17
tun0: promiscuous mode enabled
--
Lim, Wee Guan | PGP Fingerprint
weeguan@hem.passagen.se | 430F EF64 2C43 A672 67B3
ICQ: 46537067 | BFE5 6DAA B0C1 E9B1 6332
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020419065656.A477>