Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 15 Oct 2000 18:24:47 -0400
From:      "Chris Prance" <cprance@mindspring.com>
To:        <freebsd-questions@FreeBSD.org>
Subject:   HELP!!!
Message-ID:  <FFEOJNBAOMJGJIEOBINNIEJMCAAA.cprance@mindspring.com>

next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.

------=_NextPart_000_0000_01C036D5.329BA910
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

To whomever it may concern,

I NEED HELP, ahah, I knew that already.  Sorry to the point.  I'm having
problems upgrading from 3.4 stable to 4.0 stable.  I have included my
configu file and the error message I recieved upon running 'make buildkernel
KERNEL=MYKERNEL'  any answers or suggestions whould be greatly appreciated.

Thanks,
Chris Prance

------=_NextPart_000_0000_01C036D5.329BA910
Content-Type: application/octet-stream;
	name="MYKERNEL"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="MYKERNEL"

#=0A=
# GENERIC -- Generic kernel configuration file for FreeBSD/i386=0A=
#=0A=
# For more information on this file, please read the handbook section on=0A=
# Kernel Configuration Files:=0A=
#=0A=
#    http://www.FreeBSD.org/handbook/kernelconfig-config.html=0A=
#=0A=
# The handbook is also available locally in /usr/share/doc/handbook=0A=
# if you've installed the doc distribution, otherwise always see the=0A=
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the=0A=
# latest information.=0A=
#=0A=
# An exhaustive list of options and more detailed explanations of the=0A=
# device lines is also present in the ./LINT configuration file. If you =
are=0A=
# in doubt as to the purpose or necessity of a line, check first in LINT.=0A=
#=0A=
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.15 2000/10/12 01:47:16 =
msmith Exp $=0A=
=0A=
machine		i386=0A=
#cpu		I386_CPU=0A=
#cpu		I486_CPU=0A=
cpu		I586_CPU=0A=
#cpu		I686_CPU=0A=
ident		MYKERNEL=0A=
maxusers	32=0A=
=0A=
#makeoptions	DEBUG=3D-g		#Build kernel with gdb(1) debug symbols=0A=
=0A=
options 	MATH_EMULATE		#Support for x87 emulation=0A=
options 	INET			#InterNETworking=0A=
options 	INET6			#IPv6 communications protocols=0A=
options		IPFIREWALL		#Firewall=0A=
options 	FFS			#Berkeley Fast Filesystem=0A=
options 	FFS_ROOT		#FFS usable as root device [keep this!]=0A=
options 	SOFTUPDATES		#Enable FFS soft updates support=0A=
options 	MFS			#Memory Filesystem=0A=
options 	MD_ROOT			#MD is a potential root device=0A=
options 	NFS			#Network Filesystem=0A=
options 	NFS_ROOT		#NFS usable as root device, NFS required=0A=
options 	MSDOSFS			#MSDOS Filesystem=0A=
options 	CD9660			#ISO 9660 Filesystem=0A=
options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required=0A=
options 	PROCFS			#Process filesystem=0A=
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]=0A=
options 	SCSI_DELAY=3D15000	#Delay (in ms) before probing SCSI=0A=
options 	UCONSOLE		#Allow users to grab the console=0A=
options 	USERCONFIG		#boot -c editor=0A=
options 	VISUAL_USERCONFIG	#visual boot -c editor=0A=
options 	KTRACE			#ktrace(1) support=0A=
options 	SYSVSHM			#SYSV-style shared memory=0A=
options 	SYSVMSG			#SYSV-style message queues=0A=
options 	SYSVSEM			#SYSV-style semaphores=0A=
options 	P1003_1B		#Posix P1003_1B real-time extensions=0A=
options 	_KPOSIX_PRIORITY_SCHEDULING=0A=
options		ICMP_BANDLIM		#Rate limit bad replies=0A=
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev=0A=
=0A=
# To make an SMP kernel, the next two are needed=0A=
#options 	SMP			# Symmetric MultiProcessor Kernel=0A=
#options 	APIC_IO			# Symmetric (APIC) I/O=0A=
=0A=
device		isa=0A=
device		eisa=0A=
device		pci=0A=
=0A=
# Floppy drives=0A=
#device		fdc0	at isa? port IO_FD1 irq 6 drq 2=0A=
#device		fd0	at fdc0 drive 0=0A=
#device		fd1	at fdc0 drive 1=0A=
=0A=
# ATA and ATAPI devices=0A=
device		ata0	at isa? port IO_WD1 irq 14=0A=
device		ata1	at isa? port IO_WD2 irq 15=0A=
device		ata=0A=
device		atadisk			# ATA disk drives=0A=
device		atapicd			# ATAPI CDROM drives=0A=
#device		atapifd			# ATAPI floppy drives=0A=
#device		atapist			# ATAPI tape drives=0A=
#options 	ATA_STATIC_ID		#Static device numbering=0A=
#options 	ATA_ENABLE_ATAPI_DMA	#Enable DMA on ATAPI devices=0A=
=0A=
# SCSI Controllers=0A=
#device		ahb		# EISA AHA1742 family=0A=
#device		ahc		# AHA2940 and onboard AIC7xxx devices=0A=
#device		amd		# AMD 53C974 (Teckram DC-390(T))=0A=
#device		isp		# Qlogic family=0A=
#device		ncr		# NCR/Symbios Logic=0A=
#device		sym		# NCR/Symbios Logic (newer chipsets)=0A=
#options		SYM_SETUP_LP_PROBE_MAP=3D0x40=0A=
				# Allow ncr to attach legacy NCR devices when =0A=
				# both sym and ncr are configured=0A=
=0A=
#device		adv0	at isa?=0A=
#device		adw=0A=
#device		bt0	at isa?=0A=
#device		aha0	at isa?=0A=
#device		aic0	at isa?=0A=
=0A=
# SCSI peripherals=0A=
#device		scbus		# SCSI bus (required)=0A=
#device		da		# Direct Access (disks)=0A=
#device		sa		# Sequential Access (tape etc)=0A=
#device		cd		# CD=0A=
#device		pass		# Passthrough device (direct SCSI access)=0A=
=0A=
# RAID controllers interfaced to the SCSI subsystem=0A=
#device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID=0A=
#device		dpt		# DPT Smartcache - See LINT for options!=0A=
=0A=
# RAID controllers=0A=
#device		ida		# Compaq Smart RAID=0A=
#device		amr		# AMI MegaRAID=0A=
#device		mlx		# Mylex DAC960 family=0A=
#device		twe		# 3ware Escalade=0A=
=0A=
# atkbdc0 controls both the keyboard and the PS/2 mouse=0A=
device		atkbdc0	at isa? port IO_KBD=0A=
device		atkbd0	at atkbdc? irq 1 flags 0x1=0A=
device		psm0	at atkbdc? irq 12=0A=
=0A=
device		vga0	at isa?=0A=
=0A=
# splash screen/screen saver=0A=
pseudo-device	splash=0A=
=0A=
# syscons is the default console driver, resembling an SCO console=0A=
device		sc0	at isa? flags 0x100=0A=
=0A=
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver=0A=
#device		vt0	at isa?=0A=
#options 	XSERVER			# support for X server on a vt console=0A=
#options 	FAT_CURSOR		# start with block cursor=0A=
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT =
lines=0A=
#options 	PCVT_SCANSET=3D2		# IBM keyboards are non-std=0A=
=0A=
# Floating point support - do not disable.=0A=
device		npx0	at nexus? port IO_NPX irq 13=0A=
=0A=
# Power management support (see LINT for more options)=0A=
#device		apm0    at nexus? disable flags 0x20 # Advanced Power Management=0A=
=0A=
# PCCARD (PCMCIA) support=0A=
#device		card=0A=
#device		pcic0	at isa? irq 0 port 0x3e0 iomem 0xd0000=0A=
#device		pcic1	at isa? irq 0 port 0x3e2 iomem 0xd4000 disable=0A=
=0A=
# Serial (COM) ports=0A=
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4=0A=
#device		sio1	at isa? port IO_COM2 irq 3=0A=
#device		sio2	at isa? disable port IO_COM3 irq 5=0A=
#device		sio3	at isa? disable port IO_COM4 irq 9=0A=
=0A=
# Parallel port=0A=
device		ppc0	at isa? irq 7=0A=
device		ppbus		# Parallel port bus (required)=0A=
device		lpt		# Printer=0A=
device		plip		# TCP/IP over parallel=0A=
device		ppi		# Parallel port interface device=0A=
#device		vpo		# Requires scbus and da=0A=
=0A=
=0A=
# PCI Ethernet NICs.=0A=
#device		de		# DEC/Intel DC21x4x (``Tulip'')=0A=
#device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)=0A=
#device		tx		# SMC 9432TX (83c170 ``EPIC'')=0A=
#device		vx		# 3Com 3c590, 3c595 (``Vortex'')=0A=
#device		wx		# Intel Gigabit Ethernet Card (``Wiseman'')=0A=
=0A=
# PCI Ethernet NICs that use the common MII bus controller code.=0A=
#device		miibus		# MII bus support=0A=
#device		dc		# DEC/Intel 21143 and various workalikes=0A=
#device		pcn		# AMD Am79C79x PCI 10/100 NICs=0A=
device		rl		# RealTek 8129/8139=0A=
#device		sf		# Adaptec AIC-6915 (``Starfire'')=0A=
#device		sis		# Silicon Integrated Systems SiS 900/SiS 7016=0A=
#device		ste		# Sundance ST201 (D-Link DFE-550TX)=0A=
#device		tl		# Texas Instruments ThunderLAN=0A=
#device		vr		# VIA Rhine, Rhine II=0A=
#device		wb		# Winbond W89C840F=0A=
#device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')=0A=
=0A=
# ISA Ethernet NICs.=0A=
#device		ed0	at isa? port 0x280 irq 10 iomem 0xd8000=0A=
#device		ex=0A=
#device		ep=0A=
#device		fe0	at isa? port 0x300=0A=
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really=0A=
# exists only as a PCMCIA device, so there is no ISA attatement needed=0A=
# and resources will always be dynamically assigned by the pccard code.=0A=
#device		wi=0A=
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below =
will=0A=
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP=0A=
# mode (the factory default). If you set the switches on your ISA=0A=
# card for a manually chosen I/O address and IRQ, you must specify=0A=
# those paremeters here.=0A=
#device		an=0A=
# Xircom Ethernet=0A=
#device		xe=0A=
# The probe order of these is presently determined by =
i386/isa/isa_compat.c.=0A=
#device		ie0	at isa? port 0x300 irq 10 iomem 0xd0000=0A=
#device		le0	at isa? port 0x300 irq 5 iomem 0xd0000=0A=
#device		lnc0	at isa? port 0x280 irq 10 drq 0=0A=
#device		cs0	at isa? port 0x300=0A=
#device		sn0	at isa? port 0x300 irq 10=0A=
=0A=
# Pseudo devices - the number indicates how many units to allocated.=0A=
pseudo-device	loop		# Network loopback=0A=
pseudo-device	ether		# Ethernet support=0A=
pseudo-device	sl	1	# Kernel SLIP=0A=
pseudo-device	ppp	1	# Kernel PPP=0A=
pseudo-device	tun		# Packet tunnel.=0A=
pseudo-device	pty		# Pseudo-ttys (telnet etc)=0A=
pseudo-device	md		# Memory "disks"=0A=
pseudo-device	gif	4	# IPv6 and IPv4 tunneling=0A=
pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)=0A=
=0A=
# The `bpf' pseudo-device enables the Berkeley Packet Filter.=0A=
# Be aware of the administrative consequences of enabling this!=0A=
pseudo-device	bpf		#Berkeley packet filter=0A=
=0A=
# USB support=0A=
#device		uhci		# UHCI PCI->USB interface=0A=
#device		ohci		# OHCI PCI->USB interface=0A=
#device		usb		# USB Bus (required)=0A=
#device		ugen		# Generic=0A=
#device		uhid		# "Human Interface Devices"=0A=
#device		ukbd		# Keyboard=0A=
#device		ulpt		# Printer=0A=
#device		umass		# Disks/Mass storage - Requires scbus and da=0A=
#device		ums		# Mouse=0A=
# USB Ethernet, requires mii=0A=
#device		aue		# ADMtek USB ethernet=0A=
#device		cue		# CATC USB ethernet=0A=
#device		kue		# Kawasaki LSI USB ethernet=0A=

------=_NextPart_000_0000_01C036D5.329BA910
Content-Type: application/octet-stream;
	name="error.log"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="error.log"

=0A=
--------------------------------------------------------------=0A=
>>> Rebuilding kernel(s)=0A=
--------------------------------------------------------------=0A=
=3D=3D=3D> MYKERNEL=0A=
mkdir -p /usr/obj/usr/src/sys=0A=
cd /usr/src/sys/i386/conf;  =
PATH=3D/usr/obj/usr/src/i386/usr/sbin:/usr/obj/usr/src/i386/usr/bin:/usr/=
obj/usr/src/i386/usr/games:/sbin:/bin:/usr/sbin:/usr/bin  config -r -d =
/usr/obj/usr/src/sys/MYKERNEL MYKERNEL=0A=
Don't forget to do a ``make depend''=0A=
Kernel build directory is /usr/obj/usr/src/sys/MYKERNEL=0A=
cd /usr/obj/usr/src/sys/MYKERNEL;  =
MAKESRCPATH=3D/usr/src/sys/dev/aic7xxx/aicasm  make -f =
/usr/src/sys/dev/aic7xxx/aicasm/Makefile=0A=
Warning: Object directory not changed from original =
/usr/obj/usr/src/sys/MYKERNEL=0A=
yacc -d /usr/src/sys/dev/aic7xxx/aicasm/aicasm_gram.y=0A=
mv y.tab.c aicasm_gram.c=0A=
cc -O -pipe -nostdinc -I/usr/obj/usr/src/sys/MYKERNEL/../../.. -I. =
-I/usr/include   -c aicasm_gram.c=0A=
lex -t  /usr/src/sys/dev/aic7xxx/aicasm/aicasm_scan.l > aicasm_scan.c=0A=
cc -O -pipe -nostdinc -I/usr/obj/usr/src/sys/MYKERNEL/../../.. -I. =
-I/usr/include   -c aicasm_scan.c=0A=
cc -O -pipe -nostdinc -I/usr/obj/usr/src/sys/MYKERNEL/../../.. -I. =
-I/usr/include   -c /usr/src/sys/dev/aic7xxx/aicasm/aicasm.c=0A=
cc -O -pipe -nostdinc -I/usr/obj/usr/src/sys/MYKERNEL/../../.. -I. =
-I/usr/include   -c /usr/src/sys/dev/aic7xxx/aicasm/aicasm_symbol.c=0A=
cc -O -pipe -nostdinc -I/usr/obj/usr/src/sys/MYKERNEL/../../.. -I. =
-I/usr/include    -o aicasm aicasm_gram.o aicasm_scan.o aicasm.o =
aicasm_symbol.o  -ll=0A=
cd /usr/obj/usr/src/sys/MYKERNEL;  MAKEOBJDIRPREFIX=3D/usr/obj  =
COMPILER_PATH=3D/usr/obj/usr/src/i386/usr/libexec:/usr/obj/usr/src/i386/u=
sr/bin  =
LIBRARY_PATH=3D/usr/obj/usr/src/i386/usr/lib:/usr/obj/usr/src/i386/usr/li=
b  OBJFORMAT_PATH=3D/usr/obj/usr/src/i386/usr/libexec  =
PERL5LIB=3D/usr/obj/usr/src/i386/usr/libdata/perl/5.00503  =
DESTDIR=3D/usr/obj/usr/src/i386  INSTALL=3D"sh =
/usr/src/tools/install.sh"  =
PATH=3D/usr/obj/usr/src/i386/usr/sbin:/usr/obj/usr/src/i386/usr/bin:/usr/=
obj/usr/src/i386/usr/games:/sbin:/bin:/usr/sbin:/usr/bin MACHINE=3Di386 =
make KERNEL=3Dkernel depend=0A=
cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  =
-Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  =
-fformat-extensions -ansi  -nostdinc -I- -I. -I/usr/src/sys =
-I/usr/src/sys/../include  -D_KERNEL -include opt_global.h -elf  =
-mpreferred-stack-boundary=3D2 /usr/src/sys/i386/i386/genassym.c=0A=
*** Error code 1=0A=
=0A=
Stop.=0A=
*** Error code 1=0A=
=0A=
Stop.=0A=
*** Error code 1=0A=
=0A=
Stop.=0A=

------=_NextPart_000_0000_01C036D5.329BA910--



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?FFEOJNBAOMJGJIEOBINNIEJMCAAA.cprance>