Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 15 Oct 2004 12:35:11 +0200
From:      =?ISO-8859-1?Q?S=F8ren_Schmidt?= <sos@DeepCore.dk>
To:        Kenneth Vestergaard Schmidt <kvs@binarysolutions.dk>
Cc:        freebsd-current@freebsd.org
Subject:   Re: Promise SATAII 150 TX4
Message-ID:  <416FA7DF.7010804@DeepCore.dk>
In-Reply-To: <20041015093637.GM1126@binarysolutions.dk>
References:  <867jpt5lj2.fsf@borg.borderworlds.dk> <416EB73B.8040900@DeepCore.dk> <20041015093637.GM1126@binarysolutions.dk>

next in thread | previous in thread | raw e-mail | index | archive | help
Kenneth Vestergaard Schmidt wrote:

> Adding the PCI ID's does get the card recognized, but it doesn't find
> any drives:
>=20
>   atapci0: <Promise PDC40518 SATA150 controller> port 0xc400-0xc4ff,0xc=
000-0xc07f mem 0xe9000000-0xe901ffff,0xe9020000-0xe9020fff irq 11 at devi=
ce 9.0 on pci1
>   atapci0: failed: rid 0x20 is memory, requested 4
>   atapci0: Reserved 0x20000 bytes for rid 0x20 type 3 at 0xe9000000
>   atapci0: Reserved 0x1000 bytes for rid 0x1c type 3 at 0xe9020000
>   atapci0: [MPSAFE]
>   ata2: channel #0 on atapci0
>   ata2: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff
>   ata2: [MPSAFE]
>=20
> The last three lines are repeated for ata3-5 as well.
>=20
> Later, the following shows up:
>=20
>   Interrupt storm detected on "irq11: atapci0"; throttling interrupt so=
urce
>   ata0-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x46 cable=3D80pin
>   ata0-slave: setting PIO4 on Intel ICH4 chip
>   ata0-slave: setting UDMA100 on Intel ICH4 chip
>   ad1: <MAXTOR 6L040L2/A93.0500> ATA-5 disk at ata0-slave
>   ad1: 38172MB (78177792 sectors), 77557 C, 16 H, 63 S, 512 B
>   ad1: 16 secs/int, 1 depth queue, UDMA100
>=20
> (ata0-slave/ad1 belongs to atapci1, which is just an onboard ICH4)
>=20
> Does this ring a bell and inspire a quick fix, or do you need the hardw=
are
> to fix this?

The SATAII HW is significantly different AFAIK that it needs driver=20
changes/support to work properly. I'll ask my contacts at Promise for=20
more info and docs...

--=20

-S=F8ren




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?416FA7DF.7010804>