Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 5 Jan 2015 08:18:15 -0600
From:      Adam Vande More <amvandemore@gmail.com>
To:        Matthias Apitz <guru@unixarea.de>, Arthur Chance <freebsd@qeng-ho.org>,  Gregory Orange <gregory.orange@calorieking.com>,  FreeBSD Questions <freebsd-questions@freebsd.org>
Subject:   Re: CURRENT: Intel Haswell KMS support?
Message-ID:  <CA+tpaK3QOD7T6igfu-quuK-wiAT2B0szzFth9vD0Tttsr1yskQ@mail.gmail.com>
In-Reply-To: <20150105084400.GA2822@unixarea.DDR.dd>
References:  <20141231203011.51831755.ohartman@zedat.fu-berlin.de> <20141231200235.GA3957@unixarea.DDR.dd> <20141231214835.0f46afc4.ohartman@zedat.fu-berlin.de> <54A52D47.10306@qeng-ho.org> <54A9F80A.2010507@calorieking.com> <54AA4CD9.50808@qeng-ho.org> <20150105084400.GA2822@unixarea.DDR.dd>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On Mon, Jan 5, 2015 at 2:44 AM, Matthias Apitz <guru@unixarea.de> wrote:

> El d=C3=ADa Monday, January 05, 2015 a las 08:35:37AM +0000, Arthur Chanc=
e
> escribi=C3=B3:
>
> > To use the vt driver on my system I have the following two lines in
> > /boot/loader.conf
> >
> > kern.vty=3Dvt
> > i915kms_load=3D"YES"
> >
> > Try that (and reboot of course) and see what happens.
>
> Be carefully with the last line (i915kms_load=3D"YES") and prepared to
> boot from another media to reset it again, because some hardware does
> not boot with this.
>
>         matthias
>

If there are problems booting with it, then simply using the loader prompt
to not load the module is generally an easier solution.

--=20
Adam



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?CA+tpaK3QOD7T6igfu-quuK-wiAT2B0szzFth9vD0Tttsr1yskQ>