Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 11 Jun 2004 21:57:36 -0400
From:      Mike Tancsa <mike@sentex.net>
To:        "Eric Sabban" <eric@lame.net>
Cc:        questions@freebsd.org
Subject:   Re: 3WARE: Drive sector ECC error corrected
Message-ID:  <rfokc0tcb9394j4t5eu5jehp4j0vq5pq8o@4ax.com>
In-Reply-To: <200406110946.i5B9kBN6024343@goliath.lame.net>
References:  <200406110946.i5B9kBN6024343@goliath.lame.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 11 Jun 2004 02:46:09 -0700, in sentex.lists.freebsd.questions
you wrote:

>I'm currently running 3ware 8506-12 cards on freebsd 4.9 using the built=
 in
>twe driver. Today (and previously) I've run into a situation where a =
volume
>stops responding to any read or write requests.
>Here is the AEN log:

Strange, we get the odd problem like that we some maxtor drives, but
the unit recovers and all continues. =20

If you update to RELENG_4 or 4.10 there are some newer drivers.  Not
sure if it would help or not.  Perhaps open a support case on the
3ware web site. I have found them quite helpful in the past.

	---Mike

>=20
>
><tr><td WIDTH=3D"3%" BGCOLOR=3D"#f9bb00">.</td><td>18:44:28 Sat
>29-May-2004</td><td>Drive sector ECC error corrected on port 7 on =
controller
>ID:0. (0x23)</td></tr>
>
>=20
>
>Here is my dmesg:
>
>Copyright (c) 1992-2003 The FreeBSD Project.
>
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>
>        The Regents of the University of California. All rights =
reserved.
>
>FreeBSD 4.9-RELEASE-p2 #4: Thu Feb  5 14:24:16 GMT 2004
>
>    root@build.globat.com:/usr/obj/usr/src/sys/SMP-GLOBAT
>
>Timecounter "i8254"  frequency 1193182 Hz
>
>CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2790.72-MHz 686-class CPU)
>
>  Origin =3D "GenuineIntel"  Id =3D 0xf25  Stepping =3D 5
>
>=20
>Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P=
GE,MCA
>,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
>  Hyperthreading: 2 logical CPUs
>
>real memory  =3D 2146959360 (2096640K bytes)
>
>avail memory =3D 2086326272 (2037428K bytes)
>
>Programming 24 pins in IOAPIC #0
>
>IOAPIC #0 intpin 2 -> irq 0
>
>Programming 24 pins in IOAPIC #1
>
>Programming 24 pins in IOAPIC #2
>
>FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs
>
> cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
>
> cpu1 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000
>
> cpu2 (AP):  apic id:  6, version: 0x00050014, at 0xfee00000
>
> cpu3 (AP):  apic id:  7, version: 0x00050014, at 0xfee00000
>
> io0 (APIC): apic id:  2, version: 0x00178020, at 0xfec00000
>
> io1 (APIC): apic id:  3, version: 0x00178020, at 0xfec80000
>
> io2 (APIC): apic id:  4, version: 0x00178020, at 0xfec80400
>
>Preloaded elf kernel "kernel" at 0xc04b8000.
>
>Warning: Pentium 4 CPU: PSE disabled
>
>Pentium Pro MTRR support enabled
>
>md0: Malloc disk
>
>Using $PIR table, 20 entries at 0xc00fde80
>
>npx0: <math processor> on motherboard
>
>npx0: INT 16 interface
>
>pcib0: <Host to PCI bridge> on motherboard
>
>pci0: <PCI bus> on pcib0
>
>pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2541) at 0.1
>
>pcib1: <PCI to PCI bridge (vendor=3D8086 device=3D2543)> at device 2.0 =
on pci0
>
>pci1: <PCI bus> on pcib1
>
>pci1: <unknown card> (vendor=3D0x8086, dev=3D0x1461) at 28.0
>
>pcib2: <PCI to PCI bridge (vendor=3D8086 device=3D1460)> at device 29.0 =
on pci1
>
>IOAPIC #1 intpin 4 -> irq 2
>
>pci2: <PCI bus> on pcib2
>
>twe0: <3ware Storage Controller> port 0x7000-0x700f mem
>0xfc800000-0xfcffffff,0xfc200000-0xfc20000f irq 2 at device 2.0 on pci2
>
>twe0: 12 ports, Firmware FE7S 1.05.00.063, BIOS BE7X 1.08.00.048
>
>pci1: <unknown card> (vendor=3D0x8086, dev=3D0x1461) at 30.0
>
>pcib3: <PCI to PCI bridge (vendor=3D8086 device=3D1460)> at device 31.0 =
on pci1
>
>pci3: <PCI bus> on pcib3
>
>pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2544) at 2.1
>
>pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on =
pci0
>
>IOAPIC #0 intpin 21 -> irq 5
>
>IOAPIC #0 intpin 20 -> irq 10
>
>IOAPIC #0 intpin 23 -> irq 11
>
>pci4: <PCI bus> on pcib4
>
>pci4: <ATI Mach64-GR graphics accelerator> at 3.0 irq 5
>
>fxp0: <Intel 82550 Pro/100 Ethernet> port 0x8400-0x843f mem
>0xfe000000-0xfe01ffff,0xfe041000-0xfe041fff irq 10 at device 4.0 on pci4
>
>fxp0: Ethernet address 00:02:b3:e9:0d:28
>
>inphy0: <i82555 10/100 media interface> on miibus0
>
>inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>
>em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port
>0x8440-0x847f mem 0xfe020000-0xfe03ffff irq 11 at device 5.0 on pci4
>
>em0:  Speed:N/A  Duplex:N/A
>
>isab0: <PCI to ISA bridge (vendor=3D8086 device=3D2480)> at device 31.0 =
on pci0
>
>isa0: <ISA bus> on isab0
>
>atapci0: <Intel ICH3 ATA100 controller> port
>0x6c60-0x6c6f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
>
>ata0: at 0x1f0 irq 14 on atapci0
>
>ata1: at 0x170 irq 15 on atapci0
>
>pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2483) at 31.3 irq 0
>
>orm0: <Option ROMs> at iomem =
0xc0000-0xc7fff,0xc8000-0xc97ff,0xe3000-0xe3fff
>on isa0
>
>pmtimer0 on isa0
>
>fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on =
isa0
>
>fdc0: FIFO enabled, 8 bytes threshold
>
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>
>kbd0 at atkbd0
>
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
>
>sc0: <System console> at flags 0x100 on isa0
>
>sc0: VGA <16 virtual consoles, flags=3D0x100>
>
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>
>sio0: type 16550A, console
>
>sio1 at port 0x2f8-0x2ff irq 3 on isa0
>
>sio1: type 16550A
>
>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
>
>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
>
>ppc0: FIFO with 16/16/9 bytes threshold
>
>lpt0: <Printer> on ppbus0
>
>lpt0: Interrupt-driven port
>
>ppi0: <Parallel I/O> on ppbus0
>
>APIC_IO: Testing 8254 interrupt delivery
>
>APIC_IO: routing 8254 via IOAPIC #0 intpin 2
>
>SMP: AP CPU #1 Launched!
>
>SMP: AP CPU #2 Launched!
>
>SMP: AP CPU #3 Launched!
>
>ad2: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata1-master UDMA100
>
>acd0: CDROM <SR244W> at ata0-master PIO4
>
>twed0: <Unit 0, RAID5, Normal> on twe0
>
>twed0: 354550MB (726120320 sectors)
>
>twed1: <Unit 6, RAID5, Rebuilding> on twe0
>
>twed1: 763124MB (1562879488 sectors)
>
>twe0: command interrupt
>
>Mounting root from ufs:/dev/ad2s1a
>
>=20



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?rfokc0tcb9394j4t5eu5jehp4j0vq5pq8o>