Date: Mon, 08 Apr 2013 19:17:10 +0300 From: Raphael Kubo da Costa <rakuco@FreeBSD.org> To: freebsd-wireless@freebsd.org Subject: Re: updates to ar9300_hal / driver, please test Message-ID: <86zjx9atfd.fsf@orwell.Elisa> References: <CAJ-VmomVQofkj82mF-hWPgqEySk3nvi6Dr5T04Ry26eCbXNXDQ@mail.gmail.com> <CAJ-VmomE=B9-bXgAnPifc2GotDBHH-ydH_ddR6_TcyRgD-KZyw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Adrian Chadd <adrian@freebsd.org> writes: > On 4 April 2013 21:44, Adrian Chadd <adrian@freebsd.org> wrote: > >> ar9300 support: >> >> * updated to the latest internal HAL; >> * added ar9300 tx power configuration support, so you can configure >> lower tx power if you'd like. > > I've added in the bluetooth coexistence code, the bluetooth MCI > coexistence code and removed the SoC (ie, embedded inside SoCs, rather > than standalone NIC) support. When it's time to build wifi for AR933x, > AR934x, AR955x, I'll re-enable it for those builds. > > Now, if you have an AR9485 or AR946x, please test this latest driver. > I haven't _enabled_ the bluetooth coexistence code so bluetooth either > will run badly, or it won't run at all (on AR9462 and later.) But it > shouldn't have broken anything. AR9485 here. I updated qcamain_open_hal_public to commit 89885db and sys/dev/ath is at r249255. Everything still works fine in my very common and not-demanding workflow (ie. connecting to a WPA2 AP and using Bluetooth with a BT-USB Broadcom adapter).
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86zjx9atfd.fsf>