Date: Sun, 16 Feb 2003 03:17:56 -0000 From: "Paulo Melo" <pmelo@fe.uc.pt> To: "FreeBSD Mobile" <freebsd-mobile@FreeBSD.ORG> Subject: Re: Problems with serial port on Xircom RBEM56G Message-ID: <00fc01c2d56a$0054c3c0$0a00a8c0@casa>
next in thread | raw e-mail | index | archive | help
Hi all,
I understand the serial part of this Cardbus card is not working at the
moment. Anyone knows if the Ethernet part of this device is working? I had
it working on Linux (and is now working on Windows) on a Compaq Armada 1750
, but I can't seem to make it work on 5.0 RELEASE (I needed to disable
ACPI - hint.acpi.0.disabled="1"
- to get FBSD 5 to boot on this machine).
Below I present the results of running a verbose boot with
hw.cardbus.debug=1:
----------------
CPU: Pentium II/Pentium II Xeon/Celeron (299.34-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
real memory = 335478784 (319 MB)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0064f000 - 0x13fe7fff, 328830976 bytes (80281 pages)
avail memory = 319303680 (304 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x484
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:4d38 Rev = 1.0
pnpbios: Event flag at fe2f6
pnpbios: OEM ID 42b1110e
Other BIOS signatures found:
Initializing GEOMetry subsystem
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on
motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base 50000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0003, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00002020, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00002000, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[90]: type 4, range 32, base 00000d00, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 7fffe000, size 12, enabled
found-> vendor=0x104c, dev=0xac1c, revid=0x01
bus=0, slot=17, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 7ffff000, size 12, enabled
found-> vendor=0x104c, dev=0xac1c, revid=0x01
bus=0, slot=17, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x50000000-0x53ffffff
at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x1000-0x1fff
pcib1: memory decode 0x40000000-0x410fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base 40000000, size 24, enabled
map[14]: type 4, range 32, base 00001000, size 8, enabled
map[18]: type 1, range 32, base 41000000, size 12, enabled
found-> vendor=0x1002, dev=0x4c42, revid=0xdc
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x2020-0x202f at device 7.1 on
pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x2020
ata0: mask=03 ostat0=50 ostat2=00
ata0-slave: ATAPI 14 eb
ata0-master: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=09
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x2028
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2000-0x201f irq 11
at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
cbb0: <TI1225 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at device
17.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1225 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at device
17.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
pnpbios: 18 devices, largest 250 bytes
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0
pnpbios: handle 1 device ID PNP0401 (0104d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: adding irq mask 0x10
pnpbios: handle 2 device ID PNP0501 (0105d041)
PNP0511: adding io range 0x3e8-0x3ef, size=0x8, align=0
PNP0511: adding irq mask 0x10
pnpbios: handle 3 device ID PNP0511 (1105d041)
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
pnpbios: handle 4 device ID PNP0700 (0007d041)
ESS0006: adding io range 0x250-0x257, size=0x8, align=0
pnpbios: handle 5 device ID ESS0006 (06007316)
CPQb0ac: adding io range 0x220-0x22f, size=0x10, align=0
CPQb0ac: adding io range 0x388-0x38b, size=0x4, align=0
CPQb0ac: adding io range 0x300-0x301, size=0x2, align=0
CPQb0ac: adding irq mask 0x20
CPQb0ac: adding dma mask 0x1
CPQb0ac: adding dma mask 0x2
pnpbios: handle 6 device ID CPQb0ac (acb0110e)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0x13ffffff, size=0x13f00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: adding irq mask 0x2000
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
PNP0000: adding irq mask 0x4
pnpbios: handle 9 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: adding irq mask 0x1
pnpbios: handle 10 device ID PNP0100 (0001d041)
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x80-0x8f, size=0x10, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: adding dma mask 0x10
pnpbios: handle 11 device ID PNP0200 (0002d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 12 device ID PNP0800 (0008d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: adding io range 0x72-0x73, size=0x2, align=0
PNP0b00: adding irq mask 0x100
pnpbios: handle 13 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: adding irq mask 0x2
pnpbios: handle 14 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 15 device ID PNP0f13 (130fd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 16 device ID PNP0a03 (030ad041)
PNP0c02: adding fixed memory32 range 0xfffc0000-0xffffffff, size=0x40000
PNP0c02: adding io range 0x22-0x3f, size=0x1e, align=0
PNP0c02: adding io range 0x44-0x5f, size=0x1c, align=0
PNP0c02: adding io range 0x62-0x63, size=0x2, align=0
PNP0c02: adding io range 0x65-0x6f, size=0xb, align=0
PNP0c02: adding io range 0x74-0x74, size=0x1, align=0
PNP0c02: adding io range 0x75-0x75, size=0x1, align=0
PNP0c02: adding io range 0x76-0x76, size=0x1, align=0
PNP0c02: adding io range 0x77-0x77, size=0x1, align=0
PNP0c02: adding io range 0x90-0x91, size=0x2, align=0
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0
PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0
PNP0c02: adding io range 0xa2-0xbf, size=0x1e, align=0
PNP0c02: adding io range 0xe0-0xe1, size=0x2, align=0
PNP0c02: adding io range 0xe2-0xe3, size=0x2, align=0
PNP0c02: adding io range 0x100-0x107, size=0x8, align=0
PNP0c02: adding io range 0x260-0x263, size=0x4, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0xf00-0xf3f, size=0x40, align=0
PNP0c02: adding io range 0xd00-0xd0f, size=0x10, align=0
pnpbios: handle 18 device ID PNP0c02 (020cd041)
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0
pnpbios: handle 19 device ID PNP0e03 (030ed041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this
adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0511> can't assign resources (irq)
unknown: <PNP0511> at port 0x3e8-0x3ef irq 4 on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <ESS0006> failed to probe at port 0x250-0x25f on isa0
adv1: Invalid baseport of 0x220 specified. Nearest valid baseport is 0x230.
Failing probe.
unknown: <CPQb0ac> failed to probe at port
0x300-0x301,0x388-0x38b,0x220-0x22f irq 5 drq 1,0 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100.
Failing probe.
adv1: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100.
Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100.
Failing probe.
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100.
Failing probe.
adv1: Invalid baseport of 0x65 specified. Nearest valid baseport is 0x100.
Failing probe.
unknown: <PNP0800> failed to probe at port 0x65-0x74 on isa0
unknown: <PNP0b00> can't assign resources (port)
unknown: <PNP0b00> at port 0x70-0x71 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330.
Failing probe.
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x22-0x3f iomem 0xfffc0000-0xffffffff on isa0
adv1: Invalid baseport of 0x3e0 specified. Nearest valid baseport is 0x330.
Failing probe.
unknown: <PNP0e03> failed to probe at port 0x3e0-0x3ef on isa0
BIOS Geometries:
0:022aef3f 0..554=555 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
found-> vendor=0x115d, dev=0x0003, revid=0x03
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=255
Product version: 5.0
Product name: Xircom | CardBus Ethernet 10/100 + Modem 56 | CBEM56G | 1.03 |
Manufacturer ID: 0501030181
Functions: Network Adaptor, Multi-Functioned
Function Extension: 04060010a4efb670
Function Extension: 0102
Function Extension: 0280969800
Function Extension: 0200e1f505
Function Extension: 0301
Function Extension: 0303
Function Extension: 0501
cardbus0: Invalid BAR number: 27(06)
CIS reading done
dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem
0x88000000-0x880000ff,0x88000100-0x8800017f irq 11 at device 0.0 on cardbus0
dc0: Ethernet address: 06:00:10:a4:ef:b6
dc0: MII without any PHY!
device_probe_and_attach: dc0 attach returned 6
found-> vendor=0x115d, dev=0x0103, revid=0x03
class=07-00-02, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
Product version: 5.0
Product name: Xircom | CardBus Ethernet 10/100 + Modem 56 | CBEM56G | 1.03 |
Manufacturer ID: 0501001081
Functions: Serial Port, Multi-Functioned
Function Extension: 00020f5c
Function Extension: 0206003f1c03030f070001b5
Function Extension: 1306000b000200b5
cardbus0: Invalid BAR number: 27(06)
CIS reading done
sio4: irq maps: 0x1 0x1 0x1 0x1
sio4: probe failed test(s): 0 1 4 6 9
cardbus0: <unknown card> (vendor=0x115d, dev=0x0103) at 0.1 irq 11
cbb0: CardBus card activation failed
ad0: success setting UDMA2 on Intel chip
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad0: <IBM-DBCA-204860/BC3UA87F> ATA-4 disk at ata0-master
ad0: 4108MB (8415225 sectors), 8905 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata0-slave: success setting PIO4 on generic chip
acd0: <TOSHIBA CD-ROM XM-1802B/1222> CDROM drive at ata0 as slave
acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
GEOM: Configure ad0s1, start 15482880 length 2090188800 end 2105671679
GEOM: Configure ad0s2, start 3158507520 length 1150087680 end 4308595199
GEOM: Configure ad0s3, start 32256 length 15450624 end 15482879
GEOM: Configure ad0s4, start 2105671680 length 1052835840 end 3158507519
GEOM: Add ad0s2 hot[0] start 512 length 276 end 787
GEOM: Configure ad0s2a, start 52428800 length 157286400 end 209715199
GEOM: Configure ad0s2b, start 0 length 52428800 end 52428799
GEOM: Configure ad0s2c, start 0 length 1150087680 end 1150087679
GEOM: Configure ad0s2d, start 209715200 length 940372480 end 1150087679
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
splash: image decoder found: green_saver
------
and now, for pciconf -vl
------
agp0@pci0:0:0: class=0x060000 card=0x05000e11 chip=0x71908086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03
hdr=0x01
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX AGPset PCI-to-PCI bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M ISA Bridge'
class = bridge
subclass = PCI-ISA
atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01
hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M IDE Controller'
class = mass storage
subclass = ATA
uhci0@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01
hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M USB Interface'
class = serial bus
subclass = USB
none0@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
class = bridge
subclass = PCI-unknown
cbb0@pci0:17:0: class=0x060700 card=0xb1210e11 chip=0xac1c104c rev=0x01
hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1225 PC card CardBus Controller'
class = bridge
subclass = PCI-CardBus
cbb1@pci0:17:1: class=0x060700 card=0xb1210e11 chip=0xac1c104c rev=0x01
hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1225 PC card CardBus Controller'
class = bridge
subclass = PCI-CardBus
none1@pci1:0:0: class=0x030000 card=0xb10e0e11 chip=0x4c421002 rev=0xdc
hdr=0x00
vendor = 'ATI Technologies'
device = 'Rage 3D LT Pro AGP 133MHz (BGA-312 Package)'
class = display
subclass = VGA
------
Thanks in advance,
Paulo Melo
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00fc01c2d56a$0054c3c0$0a00a8c0>