Date: Sat, 17 Nov 2007 17:56:14 -0500 From: Chuck Robey <chuckr@chuckr.org> To: Joshua Isom <jrisom@gmail.com> Cc: Gary Kline <kline@tao.thought.org>, Yeef <yeef.cn@gmail.com>, freebsd-questions Questions <freebsd-questions@freebsd.org> Subject: Re: What do I put in fstab to get my DVD/CDROM burner to work? Message-ID: <473F718E.3040106@chuckr.org> In-Reply-To: <f51a49e0e8c4d389561ac22218d10d30@gmail.com> References: <20071117022321.GA92031@thought.org> <200711162121.25252.freysman@comcast.net> <20071116222207.X84300@tripel.monochrome.org> <20071117045033.GB93143@thought.org> <197f543d0711162056g6ddaf54y16a3c2e9c789a500@mail.gmail.com> <f51a49e0e8c4d389561ac22218d10d30@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Joshua Isom wrote: > > On Nov 16, 2007, at 10:56 PM, Yeef wrote: > >> this is work for me freebsd 6.2-RELEASE >> >> /dev/acd0 /cdrom cd9660 ro,noauto 0 0 >> >> you should use root mount it. > > Or set vfs.usermount to 1, if I remember right. I can't recall what's > the proper method for setting it at boot, rc.conf or loader.conf. The > default is 0, which is what I have it set to, more to annoy me than > security(personal server behind a buggy router/firewall). > > I have a dvd-rw and cd-rw in the same box, and I haven't recalled any > problems with access(except from dvd speed which I'm hoping for an > answer or fix for) or writing. > >> On Nov 17, 2007 12:50 PM, Gary Kline <kline@tao.thought.org> wrote: >>> On Fri, Nov 16, 2007 at 10:24:30PM -0500, Chris Hill wrote: >>> >>> I think I have this page bookmarked; can't find it. I'll try >>> "rw" and "ro". Can either you or David explain why I get a >>> popup error: Can't mount volume. [?] When I clicked on the >>> Details, it says: >>> >>> mount_cd9660: /dev/acd1: Operation not permitted >>> >>> I click on "System" (upper left) -> Preferences -> >>> "Removable Drives and Media Prederences" and select every >>> peermissions box. Nothing. (I'm using a data disk, not >>> audio.) Gary, I've watched for this to go awhile before i went and jumped in, to ask my question ... it's about my cdrom drive, whic is a sony, one that's been 100% reliable for me, I used it regularly under linux with k3b to burn stuff. Now, under FreeBSD, k3b won't even recognize it as a ro or rw cd drive at all. I can coax burncd to burn bootable disks successfully with it, but after the command completes, all further accesses to the drive return "device busy", and I have to reboot FreeBSD in order to even eject the cd. The only way I even knew the disk was ok was because afterwards, it tried to boot the machine from the disk image of a FreeBSD boot disk (which is what I was burning, for a different machine, an AMD64 next to it). Lucky that this machine is even binarily compatible (the Intel box is a 64 bit processor, so it boots AMD64 fine, but I didn't install it that way). Anyhow, how could I either coax k3b to recognize it, or get burncd to let the disk go after it's finished with it?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?473F718E.3040106>