Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 13 Apr 2001 11:15:02 -0500 (CDT)
From:      Alec Kloss <ajk@paw-in-eye.net>
To:        freebsd-questions@freebsd.org
Subject:   4-STABLE (Apr 12) panic
Message-ID:  <200104131615.f3DGF2W11685@hamlet.d2si.com>

next in thread | raw e-mail | index | archive | help
Any thoughts from anyone about this panic?  It's 4-STABLE from the evening
of the 10th.  It occurred during system startup right after installing
a new world.  The system is up and running okay now, so I'm not in a 
hurry, but if anyone has some insight, it would be appreciated.  

The machine has an Adaptec 29160 with two 9 GB Quantum Atlas 10K drives, 
an Adaptec 3940 with an external Plextor burner, and three Western
Digital 30 GB IDE disks running in ATA66 with a vinum RAID-5 configuration.

A panic occurred before this one, but the machine was headless at the time
so I didn't catch anything useful and nothing was logged.  The first panic
was 4-STABLE from a few months back.  I was already planning on installing
the more recent 4-STABLE yesterday evening, so I took the panic as an 
opportunity to install.  Anyway, the system was doing the following things
when it paniced.  

a) managing a remote X server
b) running setiathome
c) transferring mp3s (NFS) from the vinum array to a remote machine 
   running xmms.
d) copying eventhing on a CD9660 CD to the vinum array.

So, the machine paniced doing these things (easy to notice, the remote X
server stopped as did the music).  I took it as an opportunity to shut
the machine off, install a head, boot single user, fsck everything except
the vinum array, install the new world, build a new kernel, reboot, and
whammo.  

Let me know if there's anything else a kind soul would like to know.



Apr 12 17:30:44 hamlet ntpd[180]: ntpd 4.0.99b Tue Apr 10 23:32:11 CDT 2001 (1)
Apr 12 17:30:44 hamlet ntpd[180]: using kernel phase-lock loop 2040
Apr 12 17:30:44 hamlet /usr/local/sbin/named[178]: the default for the 'auth-nxd
omain' option is now 'no'
Apr 12 17:35:01 hamlet /kernel:
Apr 12 17:35:01 hamlet /kernel:
Apr 12 17:35:01 hamlet /kernel: Fatal trap 12: page fault while in kernel mode
Apr 12 17:35:01 hamlet /kernel: fault virtual address   = 0x2c
Apr 12 17:35:01 hamlet /kernel: fault code              = supervisor read, page
not present
Apr 12 17:35:01 hamlet /kernel: instruction pointer     = 0x8:0xc01588b6
Apr 12 17:35:01 hamlet /kernel: stack pointer           = 0x10:0xc8f10c38
Apr 12 17:35:01 hamlet /kernel: frame pointer           = 0x10:0xc8f10c38
Apr 12 17:35:01 hamlet /kernel: code segment            = base 0x0, limit 0xffff
f, type 0x1b
Apr 12 17:35:01 hamlet /kernel: = DPL 0, pres 1, def32 1, gran 1
Apr 12 17:35:01 hamlet /kernel: processor eflags        = interrupt enabled, res
ume, IOPL = 0
Apr 12 17:35:01 hamlet /kernel: current process         = 288 (mount)
Apr 12 17:35:01 hamlet /kernel: interrupt mask          = none
Apr 12 17:35:01 hamlet /kernel: trap number             = 12
Apr 12 17:35:01 hamlet /kernel: panic: page fault
Apr 12 17:35:01 hamlet /kernel:
Apr 12 17:35:01 hamlet /kernel: syncing disks... 89 87 57 36 7 6 6 6 6 6 6 6 6 6
 6 6 6 6 6 6
Apr 12 17:35:01 hamlet /kernel: giving up on 6 buffers
Apr 12 17:35:01 hamlet /kernel: Uptime: 4m14s
Apr 12 17:35:01 hamlet /kernel: Copyright (c) 1992-2001 The FreeBSD Project.
Apr 12 17:35:01 hamlet /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989
, 1991, 1992, 1993, 1994


Some possibility useful stuff from dmesg: 

CPU: AMD Duron(tm) Processor (701.60-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x630  Stepping = 0
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
  AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory  = 134152192 (131008K bytes)
avail memory = 127131648 (124152K bytes)
Preloaded elf kernel "kernel" at 0xc0362000.

Kernel config:

machine		i386
cpu		I586_CPU
cpu		I686_CPU
ident		HAMLET
maxusers	64

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	MATH_EMULATE		#Support for x87 emulation
options 	INET			#InterNETworking
#options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options         SOFTUPDATES
options 	MFS			#Memory Filesystem
options 	MD_ROOT			#MD is a potential root device
options         MD_NSECT=80000
options 	NFS			#Network Filesystem
options 	NFS_ROOT		#NFS usable as root device, NFS required
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=2000 	#Delay (in ms) before probing SCSI
options 	UCONSOLE		#Allow users to grab the console
options 	USERCONFIG		#boot -c editor
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extentions
options 	_KPOSIX_PRIORITY_SCHEDULING
options		ICMP_BANDLIM		#Rate limit bad replies
options         KBD_INSTALL_CDEV
options         AHC_ALLOW_MEMIO

# To make an SMP kernel, the next two are needed
#options 	SMP			# Symmetric MultiProcessor Kernel
#options 	APIC_IO			# Symmetric (APIC) I/O

device		isa
device		eisa
device		pci

# Floppy drives
device		fdc0	at isa? port IO_FD1 irq 6 drq 2
device		fd0	at fdc0 drive 0
device		fd1	at fdc0 drive 1

# ATA and ATAPI devices
device		ata0	at isa? port IO_WD1 irq 14
device		ata1	at isa? port IO_WD2 irq 15
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
device		atapifd			# ATAPI floppy drives
device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering
#options 	ATA_ENABLE_ATAPI_DMA	#Enable DMA on ATAPI devices

# SCSI Controllers
#device		ahb		# EISA AHA1742 family
device		ahc		# AHA2940 and onboard AIC7xxx devices
#device		amd		# AMD 53C974 (Teckram DC-390(T))
#device		dpt		# DPT Smartcache - See LINT for options!
#device		isp		# Qlogic family
#device		ncr		# NCR/Symbios Logic
#device		sym		# NCR/Symbios Logic (newer chipsets)

#device		adv0	at isa?
#device		adw
#device		bt0	at isa?
#device		aha0	at isa?
#device		aic0	at isa?

# SCSI peripherals
device		scbus		# SCSI bus (required)
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1
device		psm0	at atkbdc? irq 12

device		vga0	at isa?

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa?

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device		apm0    at nexus? flags 0x20 # Advanced Power Management

# PCCARD (PCMCIA) support
#device		card
#device		pcic0	at isa? irq 10 port 0x3e0 iomem 0xd0000
#device		pcic1	at isa? irq 11 port 0x3e2 iomem 0xd4000 disable

# Serial (COM) ports
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 irq 3
device		sio2	at isa? disable port IO_COM3 irq 5
device		sio3	at isa? disable port IO_COM4 irq 9

# Parallel port
device		ppc0	at isa? irq 7
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da


# PCI Ethernet NICs.
#device		de		# DEC/Intel DC21x4x (``Tulip'')
#device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
#device		tx		# SMC 9432TX (83c170 ``EPIC'')
device		vx		# 3Com 3c590, 3c595 (``Vortex'')
#device		wx		# Intel Gigabit Ethernet Card (``Wiseman'')

# PCI Ethernet NICs that use the common MII bus controller code.
device		miibus		# MII bus support
#device		dc		# DEC/Intel 21143 and various workalikes
device		rl		# RealTek 8129/8139
#device		sf		# Adaptec AIC-6915 (``Starfire'')
#device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
#device		ste		# Sundance ST201 (D-Link DFE-550TX)
#device		tl		# Texas Instruments ThunderLAN
#device		vr		# VIA Rhine, Rhine II
#device		wb		# Winbond W89C840F
device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.
#device		ed0	at isa? port 0x280 irq 10 iomem 0xd8000
#device		ex
#device		ep
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attatement needed
# and resources will always be dynamically assigned by the pccard code.
device		wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those paremeters here.
#device		an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device		ie0	at isa? port 0x300 irq 10 iomem 0xd0000
#device		fe0	at isa? port 0x300
#device		le0	at isa? port 0x300 irq 5 iomem 0xd0000
#device		lnc0	at isa? port 0x280 irq 10 drq 0
#device		cs0	at isa? port 0x300
#device		sn0	at isa? port 0x300 irq 10
# requires PCCARD (PCMCIA) support to be activated
#device		xe0	at isa?

# Pseudo devices - the number indicates how many units to allocated.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
#pseudo-device	sl	2	# Kernel SLIP
#pseudo-device	ppp	4	# Kernel PPP
pseudo-device	tun     8	# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	md		# Memory "disks"
pseudo-device   vn
#pseudo-device	gif	4	# IPv6 and IPv4 tunneling
#pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf		#Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		usb		# USB Bus (required)
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
device          uscanner
# USB Ethernet, requires mii
device		aue		# ADMtek USB ethernet
device		cue		# CATC USB ethernet
device		kue		# Kawasaki LSI USB ethernet

# Sound support
#device          snd0
#device          sb0     at isa? port 0x220 irq 5 drq 1
#device          sbxvi0  at isa? drq 5
#device          sbmidi0 at isa? port 0x330

# Alternate sound support
#device          pcm0    at isa? irq 10 drq 1 flags 0x0
#device          sbc0    at isa? port 0x220 irq 5 drq 1 flags 0x15

# TCP options

options         IPFIREWALL
options         IPFIREWALL_VERBOSE
options         IPFIREWALL_FORWARD
options         IPFIREWALL_VERBOSE_LIMIT=100
options         IPDIVERT
options         IPFILTER
options         IPFILTER_LOG
options         IPSTEALTH

options         ICMP_BANDLIM
options         DUMMYNET
options         BRIDGE

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200104131615.f3DGF2W11685>