Date: 12 Mar 2000 19:21:51 +0100 From: Eric Jacoboni <jaco@titine.fr.eu.org> To: current@FreeBSD.ORG Subject: Current and ep driver : sloooow ! Message-ID: <878zzogibk.fsf@titine.fr.eu.org>
next in thread | raw e-mail | index | archive | help
Hi,
I've upgraded my desktop to Current. All is ok (small problems with
the ata driver but it works fine with the old wd driver) but my
network is slow to death :
Here are the results of a ping to my laptop (under current too) :
--- alex.titine.fr.eu.org ping statistics ---
306 packets transmitted, 147 packets received, 51% packet loss
round-trip min/avg/max/stddev = 4044.251/60604.022/101000.012/26950.039 ms
Here are the relevant lines of /sbin/dmesg :
ep0: <3Com 3C509-TPO EtherLink III> at port 0x300-0x30f irq 11 on isa0
ep0: Ethernet address 00:20:af:c4:92:fc
Here are the lines from /sbin/ifconfig ep0
ep0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
ether 00:20:af:c4:92:fc
media: 10baseT/UTP
supported media: 10baseT/UTP
and here is the netstat -rn command :
Routing tables
Internet:
Destination Gateway Flags Netif Expire
default 212.27.50.254 UGSc tun0
127.0.0.1 127.0.0.1 UH lo0
192.168.2 link#1 UC ep0 =>
192.168.2.100 0:80:c8:bc:91:94 UHLW ep0 626
212.27.50.254 212.27.51.46 UH tun0
Under 3.4-Stable, all was ok, and my laptop (with a NE2K compatible
PCMCIA card) works fine with others networks at work.
My kernel config file only contains the line
device ep
I wonder why this happens. Any idea ?
--
---------------------------------------------------------
Éric Jacoboni « No sport, cigars! » (W. Churchill)
---------------------------------------------------------
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?878zzogibk.fsf>