Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 27 Oct 2015 17:05:00 +0100
From:      "Ranjan1018 ." <214748mv@gmail.com>
To:        freebsd-usb@freebsd.org
Subject:   Non working USB stick in FreeBSD.
Message-ID:  <CACyC=qYACm5EeswCwX6rBZ6nqCR3=yVszbg0ZYHWXmBPFN6HiA@mail.gmail.com>

next in thread | raw e-mail | index | archive | help
I have a 64GB USB stick that works correctly in Windows and Linux but not
in FreeBSD. The problem is during the write.

In FreeBSD I have tested the stick with the command:

# dd if=/dev/zero of=/dev/daX bs=1m

and, after some time, I received these errors in i386 and amd64:

# uname -a

FreeBSD qbic 10.1-STABLE FreeBSD 10.1-STABLE #0: Sat May  9 07:53:21 CEST
2015     root@ativ:/usr/obj/i386.i386/root/TEMP/i386_SRC/src/sys/KSTACK_PAGES_4
 i386

dmesg output:

ugen2.4: <USB> at usbus2

umass2: <USB USB, class 0/0, rev 2.00/1.00, addr 4> on usbus2

umass2:  SCSI over Bulk-Only; quirks = 0xc100

umass2:4:2:-1: Attached to scbus4

da2 at umass-sim2 bus 2 scbus4 target 0 lun 0

da2: <USB USB PMAP> Removable Direct Access SPC-4 SCSI device

da2: Serial Number ABCDEF000000000000001B61

da2: 40.000MB/s transfers

da2: 64000MB (131072000 512 byte sectors: 255H 63S/T 8158C)

da2: quirks=0x2<NO_6_BYTE>

(da2:umass-sim2:2:0:0): WRITE(10). CDB: 2a 00 00 fe 58 80 00 00 80 00

(da2:umass-sim2:2:0:0): CAM status: CCB request completed with an error

(da2:umass-sim2:2:0:0): Retrying command

(da2:umass-sim2:2:0:0): WRITE(10). CDB: 2a 00 00 fe 58 80 00 00 80 00

(da2:umass-sim2:2:0:0): CAM status: CCB request completed with an error

(da2:umass-sim2:2:0:0): Retrying command

(da2:umass-sim2:2:0:0): WRITE(10). CDB: 2a 00 00 fe 58 80 00 00 80 00

(da2:umass-sim2:2:0:0): CAM status: CCB request completed with an error

(da2:umass-sim2:2:0:0): Retrying command

(da2:umass-sim2:2:0:0): WRITE(10). CDB: 2a 00 00 fe 58 80 00 00 80 00

(da2:umass-sim2:2:0:0): CAM status: CCB request completed with an error

(da2:umass-sim2:2:0:0): Retrying command

(da2:umass-sim2:2:0:0): WRITE(10). CDB: 2a 00 00 fe 58 80 00 00 80 00

(da2:umass-sim2:2:0:0): CAM status: CCB request completed with an error

(da2:umass-sim2:2:0:0): Error 5, Retries exhausted

# uname -a

FreeBSD microserver 10.2-STABLE FreeBSD 10.2-STABLE #4 r289314M: Wed Oct 14
15:38:08 CEST 2015     root@microserver:/usr/obj/usr/src/sys/GENERIC  amd64

dmesg output:

ugen0.4: <USB> at usbus0

umass0: <USB USB, class 0/0, rev 2.00/1.00, addr 4> on usbus0

umass0:  SCSI over Bulk-Only; quirks = 0xc100

umass0:7:0:-1: Attached to scbus7

da0 at umass-sim0 bus 0 scbus7 target 0 lun 0

da0: <USB USB PMAP> Removable Direct Access SPC-4 SCSI device

da0: Serial Number ABCDEF000000000000001B61

da0: 40.000MB/s transfers

da0: 64000MB (131072000 512 byte sectors: 255H 63S/T 8158C)

da0: quirks=0x2<NO_6_BYTE>

(da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 fe 58 80 00 00 80 00

(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error

(da0:umass-sim0:0:0:0): Retrying command

(da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 fe 58 80 00 00 80 00

(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error

(da0:umass-sim0:0:0:0): Retrying command

(da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 fe 58 80 00 00 80 00

(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error

(da0:umass-sim0:0:0:0): Retrying command

(da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 fe 58 80 00 00 80 00

(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error

(da0:umass-sim0:0:0:0): Retrying command

(da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 fe 58 80 00 00 80 00

(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error

(da0:umass-sim0:0:0:0): Error 5, Retries exhausted

# uname -a

FreeBSD ativ 11.0-CURRENT FreeBSD 11.0-CURRENT #10 r289378M: Thu Oct 15
21:57:57 CEST 2015     root@ativ:/usr/obj/usr/src/sys/GENERIC  amd64

dmesg output:

ugen1.3: <USB> at usbus1

umass0: <USB USB, class 0/0, rev 2.00/1.00, addr 3> on usbus1

umass0:  SCSI over Bulk-Only; quirks = 0xc100

umass0:3:0: Attached to scbus3

da0 at umass-sim0 bus 0 scbus3 target 0 lun 0

da0: <USB USB PMAP> Removable Direct Access SPC-4 SCSI device

da0: Serial Number ABCDEF000000000000001B61

da0: 40.000MB/s transfers

da0: 64000MB (131072000 512 byte sectors)

da0: quirks=0x2<NO_6_BYTE>

(da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 fe 58 80 00 00 80 00

(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error

(da0:umass-sim0:0:0:0): Retrying command

(da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 fe 58 80 00 00 80 00

(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error

(da0:umass-sim0:0:0:0): Retrying command

(da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 fe 58 80 00 00 80 00

(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error

(da0:umass-sim0:0:0:0): Retrying command

(da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 fe 58 80 00 00 80 00

(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error

(da0:umass-sim0:0:0:0): Retrying command

(da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 fe 58 80 00 00 80 00

(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error

(da0:umass-sim0:0:0:0): Error 5, Retries exhausted

What can I do ?


Thanks in advance,

Maurizio



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CACyC=qYACm5EeswCwX6rBZ6nqCR3=yVszbg0ZYHWXmBPFN6HiA>