Date: Wed, 22 Oct 2014 09:03:27 +0200 From: Matthieu Volat <mazhe@alkumuna.eu> To: =?utf-8?Q?Jean-S=C3=A9bastien_P=C3=A9dron?= <dumbbell@FreeBSD.org> Cc: freebsd-stable@freebsd.org Subject: Re: VT switch to console disabled once X starts Message-ID: <6143A443-555A-472F-A9B7-CFF8356D4C4E@alkumuna.eu> In-Reply-To: <5446A203.9000703@FreeBSD.org> References: <2553F6A9-0363-491B-9585-E12AD32CF0F6@alkumuna.eu> <5446801E.5000405@FreeBSD.org> <20141021195528.1a1eac62@freedom> <5446A203.9000703@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
> Le 21 oct. 2014 =C3=A0 20:12, Jean-S=C3=A9bastien P=C3=A9dron = <dumbbell@FreeBSD.org> a =C3=A9crit : >=20 > On 21.10.2014 19:55, Matthieu Volat wrote: >>> And is this with vt(4) only? In other words, does it work as = expected >>> with syscons? >>=20 >> I have the problem with both syscons and vt (vga). >=20 > Hmmm, the behavior you describe happens with Intel or Radeon GPUs when > using syscons only. But it's unexpected with the NVIDIA driver, no > matter the console driver you use... Yes, I am very puzzled by this... >=20 > I have no NVIDIA hardware at hand. Was the dmesg you posted taken = before > or after X was started? I should have been, but I'm not sure at which point dmesg.boot is = trunkated, here is the dmesg of a fresh reboot with xdm: Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.1-RC2-p1 #0: Tue Oct 21 06:36:05 UTC 2014 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 VT: running with driver "vga". CPU: Intel(R) Xeon(R) CPU W3520 @ 2.67GHz (2666.72-MHz = K8-class CPU) Origin =3D "GenuineIntel" Id =3D 0x106a5 Family =3D 0x6 Model =3D = 0x1a Stepping =3D 5 = Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> = Features2=3D0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PD= CM,DCA,SSE4.1,SSE4.2,POPCNT> AMD Features=3D0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=3D0x1<LAHF> VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID TSC: P-state invariant, performance statistics real memory =3D 8592031744 (8194 MB) avail memory =3D 8236482560 (7854 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <HPQOEM TYLSBURG> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 2 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 6 ioapic0: Changing APIC ID to 1 ioapic1: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard random: <Software, Yarrow> initialized module_register_init: MOD_LOAD (vesa, 0xffffffff80d92420, 0) error 19 kbd1 at kbdmux0 acpi0: <HPQOEM SLIC-WKS> on motherboard acpi0: Power Button (fixed) acpi0: reservation of fed40000, 12c1ffe (3) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cff00000 (3) failed cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: hpet0 attach returned 12 pcib0: <ACPI Host-PCI bridge> on acpi0 pci63: <ACPI PCI bus> on pcib0 pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci3: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci15: <ACPI PCI bus> on pcib3 vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem = 0xe2000000-0xe2ffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 24 = at device 0.0 on pci15 nvidia0: <Quadro FX 580> on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io vgapci0: Boot video device pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci40: <ACPI PCI bus> on pcib4 pci0: <base peripheral, interrupt controller> at device 16.0 (no driver = attached) pci0: <base peripheral, interrupt controller> at device 16.1 (no driver = attached) pci0: <base peripheral, interrupt controller> at device 17.0 (no driver = attached) pci0: <base peripheral, interrupt controller> at device 17.1 (no driver = attached) pci0: <base peripheral, interrupt controller> at device 20.0 (no driver = attached) pci0: <base peripheral, interrupt controller> at device 20.1 (no driver = attached) pci0: <base peripheral, interrupt controller> at device 20.2 (no driver = attached) uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xd000-0xd01f = irq 20 at device 26.0 on pci0 usbus0 on uhci0 uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xd020-0xd03f = irq 21 at device 26.1 on pci0 usbus1 on uhci1 uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xd040-0xd05f = irq 22 at device 26.2 on pci0 usbus2 on uhci2 ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem = 0xe3204800-0xe3204bff irq 22 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 hdac0: <Intel 82801JI HDA Controller> mem 0xe3200000-0xe3203fff irq 21 = at device 27.0 on pci0 pcib5: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci28: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 21 at device 28.5 on pci0 pci1: <ACPI PCI bus> on pcib6 bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. = 0x5784100> mem 0xe3100000-0xe310ffff irq 17 at device 0.0 on pci1 bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, = 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: f4:ce:46:2d:aa:a6 uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xd060-0xd07f = irq 20 at device 29.0 on pci0 usbus4 on uhci3 uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xd080-0xd09f = irq 21 at device 29.1 on pci0 usbus5 on uhci4 uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xd0a0-0xd0bf = irq 22 at device 29.2 on pci0 usbus6 on uhci5 ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem = 0xe3204c00-0xe3204fff irq 20 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci55: <ACPI PCI bus> on pcib7 pci55: <serial bus, FireWire> at device 5.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel ICH8 AHCI SATA controller> port = 0xd100-0xd107,0xd110-0xd113,0xd108-0xd10f,0xd114-0xd117,0xd0c0-0xd0df = mem 0xe3204000-0xe32047ff irq 18 at device 31.2 on pci0 ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on = acpi0 qpi0: <QPI system bus> on motherboard orm0: <ISA Option ROM> at iomem 0xe9000-0xeffff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 fuse-freebsd: version 0.4.4, FUSE ABI 7.8 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <Realtek ALC262 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC262 (Analog)> at nid 21 and 24,25,26 on hdaa0 pcm1: <Realtek ALC262 (Front Analog Headphones)> at nid 27 on hdaa0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 ugen0.1: <Intel> at usbus0 ugen1.1: <Intel> at usbus1 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 ugen3.1: <Intel> at usbus3 ugen4.1: <Intel> at usbus4 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST3500418AS HP34> ATA-8cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 cd0: <hp CDDVDW TS-H653R 0E00> Removable CD-ROM SCSI-0 device=20 cd0: Serial Number R3786GBSB3631300 cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO = 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present = - tray closed SATA 2.x device ada0: Serial Number 9VM9ERCY ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! Timecounter "TSC-low" frequency 1333361188 Hz quality 1000 Root mount waiting for: usbus7 usbus3 Root mount waiting for: usbus7 usbus3 uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered Trying to mount root from zfs:zroot []... ugen6.2: <vendor 0x0461> at usbus6 ums0: <vendor 0x0461 USB Optical Mouse, class 0/0, rev 2.00/2.00, addr = 2> on usbus6 ums0: 3 buttons and [XYZ] coordinates ID=3D0 And nothing more if I switch to ttyv0... Could it be related to the fact = this is a quadro nvidia card? vgapci0@pci0:15:0:0: class=3D0x030000 card=3D0x063a10de = chip=3D0x065910de rev=3D0xa1 hdr=3D0x00 vendor =3D 'NVIDIA Corporation' device =3D 'G96 [Quadro FX 580]' class =3D display subclass =3D VGA >=20 > Your Xorg.log shows no error either. >=20 I also have a friend that happens to have a HP laptop using freebsd 9.3 = which has the same problem, coincidence? -- Matthieu Volat=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6143A443-555A-472F-A9B7-CFF8356D4C4E>