Date: Sat, 25 May 2013 02:17:24 +0800 From: Martin Wilke <miwi@freebsd.org> To: "perl@FreeBSD.org" <perl@FreeBSD.org> Subject: Fwd: p5-Search-Saryer-0.40_1 failed on amd64 9 Message-ID: <9717F59A-D5B2-468F-8C97-723F124B790E@freebsd.org> References: <201305241813.r4OIDH0w003269@pointyhat.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Begin forwarded message: > From: Portbuild user <portbuild@FreeBSD.org> > Subject: p5-Search-Saryer-0.40_1 failed on amd64 9 > Date: May 25, 2013 2:13:17 AM GMT+08:00 > To: miwi@freebsd.org, itetcu@FreeBSD.org >=20 > You can also find this build log at >=20 > = http://pointyhat.freebsd.org/errorlogs/amd64-errorlogs/a.9.20130524083024.= pointyhat/p5-Search-Saryer-0.40_1.log >=20 > building p5-Search-Saryer-0.40_1 on beefy3.isc.freebsd.org > in directory /a/pkgbuild/9/20130524083024.pointyhat/chroot/5469 > building for: 9.1-RELEASE amd64 > maintained by: perl@FreeBSD.org > port directory: /usr/ports/textproc/p5-Search-Saryer > Makefile ident: $FreeBSD: head/textproc/p5-Search-Saryer/Makefile = 300897 2012-07-14 14:29:18Z beat $ > build started at Fri May 24 18:07:05 UTC 2013 > FETCH_DEPENDS=3D > PATCH_DEPENDS=3Dperl-5.14.2_3.tbz > EXTRACT_DEPENDS=3Dperl-5.14.2_3.tbz > BUILD_DEPENDS=3Dgamin-0.1.10_5.tbz gettext-0.18.1.1_1.tbz = gio-fam-backend-2.34.3.tbz glib-2.34.3.tbz libffi-3.0.13.tbz = libiconv-1.14_1.tbz pcre-8.32.tbz perl-5.14.2_3.tbz python27-2.7.5.tbz = sary-1.2.0_2.tbz > RUN_DEPENDS=3Dgamin-0.1.10_5.tbz gettext-0.18.1.1_1.tbz = gio-fam-backend-2.34.3.tbz glib-2.34.3.tbz libffi-3.0.13.tbz = libiconv-1.14_1.tbz pcre-8.32.tbz perl-5.14.2_3.tbz python27-2.7.5.tbz = sary-1.2.0_2.tbz > PKG_DEPENDS=3D > prefixes: LOCALBASE=3Dusr/local > add_pkg > add_pkg > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 1: = make checksum>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= > =3D> Search-Saryer-0.40.tar.gz doesn't seem to exist in = /tmp/distfiles/. > =3D> Attempting to fetch = ftp://ftp-master.freebsd.org/pub/FreeBSD/ports/distfiles//Search-Saryer-0.= 40.tar.gz > Search-Saryer-0.40.tar.gz 5162 B 2430 = kBps > =3D=3D=3D> Fetching all distfiles required by p5-Search-Saryer-0.40_1 = for building > =3D> SHA256 Checksum OK for Search-Saryer-0.40.tar.gz. > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 2: = make extract>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > add_pkg perl-5.14.2_3.tbz > adding dependencies > adding package perl-5.14.2_3.tbz > Removing stale symlinks from /usr/bin... > Skipping /usr/bin/perl > Skipping /usr/bin/perl5 > Done. > Creating various symlinks in /usr/bin... > Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl > Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl5 > Done. > Cleaning up /etc/make.conf... Done. > Spamming /etc/make.conf... Done. > =3D=3D=3D> Fetching all distfiles required by p5-Search-Saryer-0.40_1 = for building > =3D=3D=3D> Extracting for p5-Search-Saryer-0.40_1 > =3D> SHA256 Checksum OK for Search-Saryer-0.40.tar.gz. > =3D=3D=3D> p5-Search-Saryer-0.40_1 depends on file: = /usr/local/bin/perl5.14.2 - found > Deleting perl-5.14.2_3 > Removing stale symlinks from /usr/bin... > Removing /usr/bin/perl > Removing /usr/bin/perl5 > Done. > Cleaning up /etc/make.conf... Done. > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 3: = make patch>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > add_pkg perl-5.14.2_3.tbz > adding dependencies > adding package perl-5.14.2_3.tbz > Removing stale symlinks from /usr/bin... > Skipping /usr/bin/perl > Skipping /usr/bin/perl5 > Done. > Creating various symlinks in /usr/bin... > Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl > Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl5 > Done. > Cleaning up /etc/make.conf... Done. > Spamming /etc/make.conf... Done. > =3D=3D=3D> Patching for p5-Search-Saryer-0.40_1 > =3D=3D=3D> p5-Search-Saryer-0.40_1 depends on file: = /usr/local/bin/perl5.14.2 - found > =3D=3D=3D> Applying FreeBSD patches for p5-Search-Saryer-0.40_1 > Deleting perl-5.14.2_3 > Removing stale symlinks from /usr/bin... > Removing /usr/bin/perl > Removing /usr/bin/perl5 > Done. > Cleaning up /etc/make.conf... Done. > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 4: = make build>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > add_pkg gamin-0.1.10_5.tbz gettext-0.18.1.1_1.tbz = gio-fam-backend-2.34.3.tbz glib-2.34.3.tbz libffi-3.0.13.tbz = libiconv-1.14_1.tbz pcre-8.32.tbz perl-5.14.2_3.tbz python27-2.7.5.tbz = sary-1.2.0_2.tbz > adding dependencies > adding package gamin-0.1.10_5.tbz > Removing stale symlinks from /usr/bin... > Skipping /usr/bin/perl > Skipping /usr/bin/perl5 > Done. > Creating various symlinks in /usr/bin... > Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl > Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl5 > Done. > Cleaning up /etc/make.conf... Done. > Spamming /etc/make.conf... Done. >=20 > =3D=3D=3D=3D > Note that some of the standard modules are provided as separate > ports since they require extra dependencies: >=20 > bsddb databases/py-bsddb > gdbm databases/py-gdbm > sqlite3 databases/py-sqlite3 > tkinter x11-toolkits/py-tkinter >=20 > Install them as needed. > =3D=3D=3D=3D >=20 > No schema files found: doing nothing. >=20 > = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D >=20 > Gamin will only provide realtime notification of changes for at most n = files, > where n is the minimum value between (kern.maxfiles * 0.7) and > (kern.maxfilesperproc - 200). Beyond that limit, files will be polled. >=20 > If you often open several large folders with Nautilus, you might want = to > increase the kern.maxfiles tunable (you do not need to set > kern.maxfilesperproc, since it is computed at boot time from = kern.maxfiles). >=20 > For a typical desktop, add the following line to /boot/loader.conf, = then > reboot the system: >=20 > kern.maxfiles=3D"25000" >=20 > The behavior of gamin can be controlled via the various gaminrc files. > See http://www.gnome.org/~veillard/gamin/config.html on how to create > these files. In particular, if you find gam_server is taking up too = much > CPU time polling for changes, something like the following may help > in one of the gaminrc files: >=20 > # reduce polling frequency to once per 10 seconds > # for UFS file systems in order to lower CPU load > fsset ufs poll 10 >=20 > = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D >=20 > adding package gettext-0.18.1.1_1.tbz > skipping gettext-0.18.1.1_1, already added > adding package gio-fam-backend-2.34.3.tbz > adding package glib-2.34.3.tbz > skipping glib-2.34.3, already added > adding package libffi-3.0.13.tbz > skipping libffi-3.0.13, already added > adding package libiconv-1.14_1.tbz > skipping libiconv-1.14_1, already added > adding package pcre-8.32.tbz > skipping pcre-8.32, already added > adding package perl-5.14.2_3.tbz > skipping perl-5.14.2_3, already added > adding package python27-2.7.5.tbz > skipping python27-2.7.5, already added > adding package sary-1.2.0_2.tbz > =3D=3D=3D> p5-Search-Saryer-0.40_1 depends on file: = /usr/local/bin/perl5.14.2 - found > =3D=3D=3D> p5-Search-Saryer-0.40_1 depends on shared library: = sary.10 - found > =3D=3D=3D> Configuring for p5-Search-Saryer-0.40_1 > Checking if your kit is complete... > Looks good > Writing Makefile for Search::Saryer > Writing MYMETA.yml > =3D=3D=3D> Building for p5-Search-Saryer-0.40_1 > cp Saryer.pm blib/lib/Search/Saryer.pm > /usr/local/bin/perl5.14.2 /usr/local/lib/perl5/5.14.2/ExtUtils/xsubpp = -typemap /usr/local/lib/perl5/5.14.2/ExtUtils/typemap Saryer.xs > = Saryer.xsc && mv Saryer.xsc Saryer.c > cc -c -O2 -pipe -fno-strict-aliasing -O2 -pipe -fno-strict-aliasing = -DVERSION=3D\"0.40\" -DXS_VERSION=3D\"0.40\" -DPIC -fPIC = "-I/usr/local/lib/perl5/5.14.2/mach/CORE" Saryer.c > Saryer.xs:20:18: error: sary.h: No such file or directory > Saryer.xs: In function 'XS_Search__Saryer_perl_saryer_new': > Saryer.xs:40: error: 'SarySearcher' undeclared (first use in this = function) > Saryer.xs:40: error: (Each undeclared identifier is reported only once > Saryer.xs:40: error: for each function it appears in.) > Saryer.xs:40: error: 'saryer' undeclared (first use in this function) > Saryer.xs: In function 'XS_Search__Saryer_perl_saryer_destroy': > Saryer.xs:60: error: 'SarySearcher' undeclared (first use in this = function) > Saryer.xs:60: error: 'ps' undeclared (first use in this function) > Saryer.xs:63: error: expected expression before ')' token > Saryer.xs: In function 'XS_Search__Saryer_perl_saryer_enable_cache': > Saryer.xs:71: error: 'SarySearcher' undeclared (first use in this = function) > Saryer.xs:71: error: 'ps' undeclared (first use in this function) > Saryer.xs:74: error: expected expression before ')' token > Saryer.xs: In function 'XS_Search__Saryer_perl_saryer_search': > Saryer.xs:84: error: 'SarySearcher' undeclared (first use in this = function) > Saryer.xs:84: error: 'ps' undeclared (first use in this function) > Saryer.xs:85: error: 'gboolean' undeclared (first use in this = function) > Saryer.xs:85: error: expected ';' before 'ret' > Saryer.xs:88: error: expected expression before ')' token > Saryer.xs:89: error: 'ret' undeclared (first use in this function) > Saryer.xs: In function 'XS_Search__Saryer_perl_saryer_icase_search': > Saryer.xs:106: error: 'SarySearcher' undeclared (first use in this = function) > Saryer.xs:106: error: 'ps' undeclared (first use in this function) > Saryer.xs:107: error: 'gboolean' undeclared (first use in this = function) > Saryer.xs:107: error: expected ';' before 'ret' > Saryer.xs:110: error: expected expression before ')' token > Saryer.xs:111: error: 'ret' undeclared (first use in this function) > Saryer.xs: In function 'XS_Search__Saryer_perl_saryer_get_next_line': > Saryer.xs:126: error: 'SarySearcher' undeclared (first use in this = function) > Saryer.xs:126: error: 'ps' undeclared (first use in this function) > Saryer.xs:127: error: 'SaryInt' undeclared (first use in this = function) > Saryer.xs:127: error: expected ';' before 'len' > Saryer.xs:131: error: expected expression before ')' token > Saryer.xs:132: error: 'len' undeclared (first use in this function) > Saryer.xs:132: warning: assignment makes pointer from integer without = a cast > Saryer.xs: In function = 'XS_Search__Saryer_perl_saryer_get_next_context_lines': > Saryer.xs:149: error: 'SarySearcher' undeclared (first use in this = function) > Saryer.xs:149: error: 'ps' undeclared (first use in this function) > Saryer.xs:150: error: 'SaryInt' undeclared (first use in this = function) > Saryer.xs:150: error: expected ';' before 'len' > Saryer.xs:154: error: expected expression before ')' token > Saryer.xs:155: error: 'len' undeclared (first use in this function) > Saryer.xs:155: warning: assignment makes pointer from integer without = a cast > Saryer.xs: In function = 'XS_Search__Saryer_perl_saryer_get_next_tagged_region': > Saryer.xs:172: error: 'SarySearcher' undeclared (first use in this = function) > Saryer.xs:172: error: 'ps' undeclared (first use in this function) > Saryer.xs:176: error: expected expression before ')' token > Saryer.xs:177: warning: assignment makes pointer from integer without = a cast > Saryer.xs: In function = 'XS_Search__Saryer_perl_saryer_count_occurrences': > Saryer.xs:193: error: 'SarySearcher' undeclared (first use in this = function) > Saryer.xs:193: error: 'ps' undeclared (first use in this function) > Saryer.xs:196: error: expected expression before ')' token > Saryer.xs: In function = 'XS_Search__Saryer_perl_saryer_sort_occurrences': > Saryer.xs:207: error: 'SarySearcher' undeclared (first use in this = function) > Saryer.xs:207: error: 'ps' undeclared (first use in this function) > Saryer.xs:210: error: expected expression before ')' token > *** [Saryer.o] Error code 1 >=20 > Stop in = /work/a/ports/textproc/p5-Search-Saryer/work/Search-Saryer-0.40. > *** [do-build] Error code 1 >=20 > Stop in /a/ports/textproc/p5-Search-Saryer. > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > build of /usr/ports/textproc/p5-Search-Saryer ended at Fri May 24 = 18:13:15 UTC 2013 >=20 +-----------------oOO--(_)--OOo-------------------------+ With best Regards, Martin Wilke (miwi_(at)_FreeBSD.org) Mess with the Best, Die like the Rest
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9717F59A-D5B2-468F-8C97-723F124B790E>