Date: Fri, 4 Jun 2004 01:14:23 -0400 From: Rob Clark <robclark@tds.net> To: Rob Clark <robclark@tds.net> Cc: acardenas@bsdperu.org Subject: Re: 4.10-STABLE - ADSL PPPoE Message-ID: <20040604011423.6febd81b.robclark@tds.net> In-Reply-To: <20040603201016.20f069de.robclark@tds.net> References: <20040603222417.730AD43D5A@mx1.FreeBSD.org> <20040603201016.20f069de.robclark@tds.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 3 Jun 2004 20:10:16 -0400 Rob Clark <robclark@tds.net> wrote: > On Thu, 03 Jun 2004 18:16:00 > <acardenas@bsdperu.org> wrote: > > > Dear all, > > > > I update my system 4.10-STABLE(27 May) to FreeBSD > > 4.10-STABLE(June 2) without problems but now my > > connection ADSL does not work , previously worked > > correctly, and the connections with loopback 127.0.0.1 > > delay much, example ssh/ftp/ 127.0.0.1 delay 30 - 40 > > seconds. > > > > [ppp.log messages] > > > > Jun 3 14:54:35 HellFire ppp[56]: tun0: Phase: deflink: > > Disconnected! Jun 3 14:54:35 HellFire ppp[56]: tun0: > > Phase: deflink: carrier -> hangup Jun 3 14:54:35 > > HellFire ppp[56]: tun0: Phase: deflink: Connect time: 5 > > secs: 0 octets in, 0 octets out Jun 3 14:54:35 HellFire > > ppp[56]: tun0: Phase: deflink: 0 packets in, 0 packets > > out Jun 3 14:54:35 HellFire ppp[56]: tun0: Phase: > > total 0 bytes/sec, peak 0 bytes/sec on Thu Jun 3 > > 14:54:30 2004 Jun 3 14:54:35 HellFire ppp[56]: tun0: > > Phase: deflink: hangup -> opening Jun 3 14:54:35 > > HellFire ppp[56]: tun0: Phase: deflink: Enter pause (0) > > for redialing. Jun 3 14:54:35 HellFire ppp[56]: tun0: > > Chat: deflink: Redial timer expired. Jun 3 14:54:35 > > HellFire ppp[56]: tun0: Phase: deflink: Connected! Jun > > 3 14:54:35 HellFire ppp[56]: tun0: Phase: deflink: > > opening -> dial Jun 3 14:54:35 HellFire ppp[56]: tun0: > > Phase: deflink: dial -> carrier > > > > (repeatedly) > > > > Device rl0(Realtek 8139) > > > > Does it can be bug? > > > > ACMhUnTeR > > > > > > I seen this same behavior today (06.03.04) after updating > sources. My last update was 05.27.04 and everything worked > fine at that point in the branch. > > PPPoE on today's stable doesn't load the netgraph > modules: > > netgraph.ko > ng_ether.ko > ng_pppoe.ko > ng_socket.ko > > when PPPoE is started. > > I reverted to sources to 05.27.04 date, did buildworld and > PPPoE is working again by adding the following to my > supfile: > *default date=2004.05.27.23.00.00 > > > If I can help in narrowing down the date of failure please > let me know. > > Thanks, > Rob > Apologies for following up on my own post, but i've narrowed down the failure window a bit. Other updates tried: *default date=2004.05.27.23.00.00 /* works */ *default date=2004.06.01.00.00.00 /* works */ *default date=2004.06.02.00.00.00 /* breaks */ cvsupping from date=2004.06.01.00.00.00 to date=2004.06.02.00.00.00 is where the breakage occurs. Here is an excerpt from the cvsup log showing the files involved: Updating collection src-all/cvs Edit src/share/man/man4/ng_ether.4 Add delta 1.4.2.13 2004.06.01.22.55.24 archie Edit src/share/man/man4/ng_hole.4 Add delta 1.10.2.2 2004.06.01.14.50.38 ru Edit src/sys/i386/i386/mp_machdep.c Add delta 1.115.2.21 2004.06.01.18.09.58 jhb Edit src/sys/netgraph/ng_ether.c Add delta 1.2.2.15 2004.06.01.22.55.24 archie Edit src/sys/netinet/ip_output.c Add delta 1.99.2.45 2004.06.01.07.38.56 maxim Edit src/sys/sys/param.h Add delta 1.61.2.43 2004.06.01.03.49.13 hrs Edit src/usr.bin/calendar/calendars/calendar.birthday Add delta 1.12.2.6 2004.06.01.09.45.56 tanimura Checkout src/usr.sbin/arlcontrol/Makefile Checkout src/usr.sbin/arlcontrol/arlcontrol.8 Shutting down connection to server Finished successfully Best Regards, Rob
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040604011423.6febd81b.robclark>