Date: Tue, 13 Mar 2012 08:01:12 -0700 From: Adrian Chadd <adrian@freebsd.org> To: saint <saint_bxg@126.com> Cc: freebsd-wireless@freebsd.org Subject: Re: Freebsd9.0 TDMA: stuck beacon problem Message-ID: <CAJ-Vmokz9CRQ%2BKu-T=G6PUgPk66oHs2gG_iVf5xvc3K3HC1v5g@mail.gmail.com> In-Reply-To: <4ef315ef.141dd.1360bee4368.Coremail.saint_bxg@126.com> References: <4ef315ef.141dd.1360bee4368.Coremail.saint_bxg@126.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi! The 11n chipset TDMA support in 8.x was unfortunately very broken (it made the wrong assumptions about timer resolution and configuration which changed between the AR5212-era MAC and the AR5416 11n era MAC.) Figuring out what's wrong with TDMA is on my TODO list but I don't have the time at the present moment, I'm afraid. Someone popped up a few months ago and made TDMA mostly work again with the 11n NICs but I forget whether it made it into -HEAD or not. Maybe try TDMA on -HEAD. Don't enable 11n. That won't work. :) Adrian 2012/3/13 saint <saint_bxg@126.com>: > Hi Adrian: > =A0 =A0This is Michael. > =A0 =A0I'm trying to implement TDMA connection with two Atheros cards(AR5= 416 and AR9285) working on freebsd 9.0-release. > =A0 =A0After reading the handbook, I added the build option IEEE80211_SUP= PORT_TDMA, and modified loader.conf as: > if_ath_load=3D"YES" > if_ath_pci_load=3D"YES" > =A0 =A0I rebuilt and reinstalled the kernel, reboot ... > =A0 =A0After that, the ath driver can be loaded and I could configure two= cards as adhoc mode and connect each other successfully. =A0:) > =A0 =A0But, when I configured the card as tdma mode and set it as a maste= r(tdmaslot 0), a few seconds later, the screen was full of: > "ath0: stuck beacon; resetting( bmiss count 4)" > > > =A0 =A0config commands: > ifconfig wlan0 create wlandev ath0 wlanmode tdma > ifconfig wlan0 ssid freebsd-tdma tdmaslotlen 2500 tdmaslot 0 > ifconfig wlan0 up =A0(after this, "ath0: stuck beacon..." appears) > > > =A0 =A0If I set the card as a slave( tdmaslot 1), no these output message= s. :( > =A0 =A0I tried to find the result from the code, it pointed to ath_hal_nu= mtxpending(). (That means there are still frames pending in the QCU(AR5416)= ). But I didn't know why. > =A0 =A0I searched it on the internet, many people experienced it, but non= e of them was the same case as mine. > > > =A0 =A0Then I reinstalled the OS with freebsd8.2-release. There was no "a= th0: stuck beacon..." =A0:) > =A0 =A0But under freebsd8.2, I could not connect two cards as tdma mode e= ither(no beacons send out). Oh~~ :(:( > =A0 =A0Card not support? OS not support? TDMA not support in 9.0 release? > =A0 =A0Could you give me some advise, thanks a lot! > > > Best Wishes > > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.or= g"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmokz9CRQ%2BKu-T=G6PUgPk66oHs2gG_iVf5xvc3K3HC1v5g>