Date: Fri, 18 Nov 2005 12:37:42 -0300 From: Mauricio Brunstein <mbrunstein@gmail.com> To: Ben Pratt <ben@thegeekzone.com>, freebsd-questions@freebsd.org Subject: Re: Cant login using ssh; no password prompt Message-ID: <598229640511180737v17d8e6dcr11c65fbb672b76c6@mail.gmail.com> In-Reply-To: <437DEC67.9020905@thegeekzone.com> References: <598229640511180650m5c90683bqa1b82fcc0b0fc1d6@mail.gmail.com> <437DEC67.9020905@thegeekzone.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi ben! Thank you for oyur answer. The resolv.conf file have this line: nameserver 192.168.1.1 At this address there is an OpenBSD 3.7 firewall which running a cache DNS from my provider. When I was using olders versions of ssh from the loca= l network I had to wait more to the password prompt until I've configured the /etc/hosts file in the new box. Bun never happened a situation like this one. Thank you for all, Mauro On 11/18/05, Ben Pratt <ben@thegeekzone.com> wrote: > I have seen this before and every time it turns out to be that DNS isn't > working on the box. Please make sure that you are able to access a DNS > server from the box by trying to ping google.com or something. > > Good luck, > > Ben > > Mauricio Brunstein wrote: > > Hi! > > > > I've installed a new box with FreeBSD 6.0 (workbench) and cant login > > to it by means of ssh from the internal or external network. The box > > is installed from the release version, and worked fine using the > > console. I also had accessed other hosts form there using ssh. I did > > not patch the box in any way, is just the 6.0 release version. I can > > not login to that box form a local OpenBSD 3.7 box, a 5.4 box (as > > shown below) or using putty 0.57 from the Internet (the putty window > > closes after some time without asking me for a password) . > > > > Anybody have and idea of what could be happening? > > > > Thank you in advance, > > Mauro > > > > Form a 5.4 Box, > > > > mauro@Server:~> uname -a > > FreeBSD Server.blstar 5.4-RELEASE-p8 FreeBSD 5.4-RELEASE-p8 #0: Sun > > Oct 16 04:00:03 ART 2005 mauro@:/usr/obj/usr/src/sys/GENERIC i386 > > > > I issue the following command: > > > > mauro@Server:~> ssh -vvv workbench > > OpenSSH_3.8.1p1 FreeBSD-20040419, OpenSSL 0.9.7e-p1 25 Oct 2004 > > debug1: Reading configuration data /etc/ssh/ssh_config > > debug2: ssh_connect: needpriv 0 > > debug1: Connecting to workbench.blstar [192.168.1.34] port 22. > > debug1: Connection established. > > debug1: identity file /home/mauro/.ssh/identity type -1 > > debug1: identity file /home/mauro/.ssh/id_rsa type -1 > > debug1: identity file /home/mauro/.ssh/id_dsa type -1 > > debug1: Remote protocol version 2.0, remote software version > > OpenSSH_4.2p1 FreeBSD-20050903 > > debug1: match: OpenSSH_4.2p1 FreeBSD-20050903 pat OpenSSH* > > debug1: Enabling compatibility mode for protocol 2.0 > > debug1: Local version string SSH-2.0-OpenSSH_3.8.1p1 FreeBSD-20040419 > > debug1: SSH2_MSG_KEXINIT sent > > debug1: SSH2_MSG_KEXINIT received > > debug2: kex_parse_kexinit: > > diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1 > > debug2: kex_parse_kexinit: ssh-dss,ssh-rsa > > debug2: kex_parse_kexinit: > > aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-= cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr > > debug2: kex_parse_kexinit: > > aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-= cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr > > debug2: kex_parse_kexinit: > > hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-= 96,hmac-md5-96 > > debug2: kex_parse_kexinit: > > hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-= 96,hmac-md5-96 > > debug2: kex_parse_kexinit: none,zlib > > debug2: kex_parse_kexinit: none,zlib > > debug2: kex_parse_kexinit: > > debug2: kex_parse_kexinit: > > debug2: kex_parse_kexinit: first_kex_follows 0 > > debug2: kex_parse_kexinit: reserved 0 > > debug2: kex_parse_kexinit: > > diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-h= ellman-group1-sha1 > > debug2: kex_parse_kexinit: ssh-dss > > debug2: kex_parse_kexinit: > > aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcf= our,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr= ,aes256-ctr > > debug2: kex_parse_kexinit: > > aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcf= our,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr= ,aes256-ctr > > debug2: kex_parse_kexinit: > > hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-= 96,hmac-md5-96 > > debug2: kex_parse_kexinit: > > hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-= 96,hmac-md5-96 > > debug2: kex_parse_kexinit: none,zlib@openssh.com > > debug2: kex_parse_kexinit: none,zlib@openssh.com > > debug2: kex_parse_kexinit: > > debug2: kex_parse_kexinit: > > debug2: kex_parse_kexinit: first_kex_follows 0 > > debug2: kex_parse_kexinit: reserved 0 > > debug2: mac_init: found hmac-md5 > > debug1: kex: server->client aes128-cbc hmac-md5 none > > debug2: mac_init: found hmac-md5 > > debug1: kex: client->server aes128-cbc hmac-md5 none > > debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent > > debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP > > debug2: dh_gen_key: priv key bits set: 129/256 > > debug2: bits set: 536/1024 > > debug1: SSH2_MSG_KEX_DH_GEX_INIT sent > > debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY > > debug3: check_host_in_hostfile: filename /home/mauro/.ssh/known_hosts > > debug3: check_host_in_hostfile: match line 3 > > debug1: Host 'workbench.blstar' is known and matches the DSA host key. > > debug1: Found key in /home/mauro/.ssh/known_hosts:3 > > debug2: bits set: 497/1024 > > debug1: ssh_dss_verify: signature correct > > debug2: kex_derive_keys > > debug2: set_newkeys: mode 1 > > debug1: SSH2_MSG_NEWKEYS sent > > debug1: expecting SSH2_MSG_NEWKEYS > > debug2: set_newkeys: mode 0 > > debug1: SSH2_MSG_NEWKEYS received > > debug1: SSH2_MSG_SERVICE_REQUEST sent > > debug2: service_accept: ssh-userauth > > debug1: SSH2_MSG_SERVICE_ACCEPT received > > debug2: key: /home/mauro/.ssh/identity (0x0) > > debug2: key: /home/mauro/.ssh/id_rsa (0x0) > > debug2: key: /home/mauro/.ssh/id_dsa (0x0) > > debug1: Authentications that can continue: publickey,keyboard-interacti= ve > > debug3: start over, passed a different list publickey,keyboard-interact= ive > > debug3: preferred publickey,keyboard-interactive,password > > debug3: authmethod_lookup publickey > > debug3: remaining preferred: keyboard-interactive,password > > debug3: authmethod_is_enabled publickey > > debug1: Next authentication method: publickey > > debug1: Trying private key: /home/mauro/.ssh/identity > > debug3: no such identity: /home/mauro/.ssh/identity > > debug1: Trying private key: /home/mauro/.ssh/id_rsa > > debug3: no such identity: /home/mauro/.ssh/id_rsa > > debug1: Trying private key: /home/mauro/.ssh/id_dsa > > debug3: no such identity: /home/mauro/.ssh/id_dsa > > debug2: we did not send a packet, disable method > > debug3: authmethod_lookup keyboard-interactive > > debug3: remaining preferred: password > > debug3: authmethod_is_enabled keyboard-interactive > > debug1: Next authentication method: keyboard-interactive > > debug2: userauth_kbdint > > debug2: we sent a keyboard-interactive packet, wait for reply > > Connection closed by 192.168.1.34 > > mauro@Server:~> > > _______________________________________________ > > freebsd-questions@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd= .org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?598229640511180737v17d8e6dcr11c65fbb672b76c6>