Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 18 Mar 2002 01:08:30 -0500
From:      Brendan McAlpine <bmcalpine@macconnect.com>
To:        Patrick O'Reilly <bsd@perimeter.co.za>, <questions@FreeBSD.ORG>
Subject:   Re: HELP!!  problem with new bsd mail server [solved kind of]
Message-ID:  <B8BAEE8E.BA45%bmcalpine@macconnect.com>
In-Reply-To: <001601c1ce41$1b8ff5a0$0200000a@perimeter.co.za>

next in thread | previous in thread | raw e-mail | index | archive | help
Is there a way to change this without re-compiling the kernel?

What do you think it should be set to?

Brendan

> From: "Patrick O'Reilly" <bsd@perimeter.co.za>
> Date: Mon, 18 Mar 2002 07:52:33 +0200
> To: "Brendan McAlpine" <bmcalpine@macconnect.com>, "Doug Reynolds"
> <mav@wastegate.net>, <questions@FreeBSD.ORG>
> Subject: Re: HELP!!  problem with new bsd mail server [solved kind of]
> 
> maxusers in the Kernel config ???
> 
> ----- Original Message -----
> From: "Brendan McAlpine" <bmcalpine@macconnect.com>
> To: "Doug Reynolds" <mav@wastegate.net>; "Patrick O'Reilly"
> <peri@perimeter.co.za>; <questions@FreeBSD.ORG>
> Sent: Monday, March 18, 2002 12:34 AM
> Subject: Re: HELP!! problem with new bsd mail server [solved kind of]
> 
> 
>> Ok
>> 
>> Here is what I've found so far.  Thanks for all the help to date.  It is
>> very much appreciated.
>> 
>> I found that when I shut down qmail, the server returned to normal.
> After a
>> thorough search through qmail files and after several hours of testing,
> the
>> problem seems to be occurring when the concurrent connections (pop and
> smtp)
>> gets up to about 100.  At that point the network card stops working.
>> 
>> I am using the generic 4.3 kernel.  Once I lowered qmails concurrent
>> connections setting (to 20, very low) the server operated just fine.
>> However, when it gets busy during business hours, mail is going to be
> queued
>> up, not a good thing.
>> 
>> Are there any settings in the kernel that I should be changing to allow
> this
>> machine to handle more concurrent connections without freaking out?
>> 
>> Thanks for any advice.
>> 
>> Brendan
>>> From: "Doug Reynolds" <mav@wastegate.net>
>>> Reply-To: "Doug Reynolds" <mav@wastegate.net>
>>> Date: Sun, 17 Mar 2002 11:39:32 -0500
>>> To: "Brendan McAlpine" <bmcalpine@macconnect.com>, "Patrick O'Reilly"
>>> <peri@perimeter.co.za>, "questions@FreeBSD.ORG"
> <questions@FreeBSD.ORG>
>>> Subject: Re: HELP!!  problem with new bsd mail server [solved kind of]
>>> 
>>> On Sun, 17 Mar 2002 11:24:33 -0500, Brendan McAlpine wrote:
>>> 
>>>> Thanks Patrick.  Sorry for the lack of info.
>>>> 
>>>> At this point, all I want is for the machine to run a full 24 hours
> without
>>>> going deaf to network connections.
>>>> 
>>>> Its very strange.  The machine is running FreeBSD4.5 and I'm running
> qmail,
>>>> qmailadmin, and sqwebmail.  Apache is serving up the qmailadmin and
>>>> sqwebmail cgi's.
>>>> 
>>>> The machine is a brand new, dual 1GHZ pentium running RAID 5 across 3
> large
>>>> SCSI disks.
>>>> 
>>>> Every 3 or 4 hours the machine goes "deaf" to its network set up and
> no
>>>> incoming or outbound traffic can get through.  When it goes deaf it
> can't
>>>> even ping the switch its connected to.
>>>> 
>>>> At first I thought the problem was because of the dual ethernet
> cards.  So I
>>>> disabled one of them in the bios settings.  The machine ran better.
> After
>>>> 24 hours or so, it started going deaf every 4 or 5 hours again.
>>>> 
>>>> Since this is happening on a more or less random schedule, I can't
> pin down
>>>> what the problem is.  Something is causing the machine to less its
>>>> networking ability for about 10 minutes at a time every 4 or 5 hours.
>>>> 
>>>> BTW, I checked my log files and nothing is being logged as errors
> when the
>>>> downtime occurs.  The only errors in there are:
>>>> 
>>>> /kernel: stray irq 7
>>>> 
>>>> I'm unsure of how to move from here....please help.....
>>> 
>>> first thing you need to give us is a dmesg and tell us what kinda
>>> network card(s) you are running..
>>> 
>>> the stray irq 7 sounds like a conflict
>>> 
>>> try turning off your LPT1 printer port in the BIOS (if you aren't
> using
>>> it) and see if that helps
>>> 
>>> ---
>>> doug reynolds | the maverick | mav@wastegate.net
>>> 
>>> PGP Public Key Fingerprint: 7FEC 10AA 056B F8DE  AC1E 6965 FBBE 9601
>>> 
>>> 
>>> 
>> 
>> 
>> To Unsubscribe: send mail to majordomo@FreeBSD.org
>> with "unsubscribe freebsd-questions" in the body of the message
>> 
> 
> 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B8BAEE8E.BA45%bmcalpine>