Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 05 Nov 2004 17:41:54 +0100
From:      Gabor MICSKO <gmicsko@szintezis.hu>
To:        freebsd-current@freebsd.org
Subject:   5.3-RC2: Fatal trap 19: non-maskable interrupt trap while in kernel mode
Message-ID:  <1099672914.7059.13.camel@alderaan.trey.hu>

next in thread | raw e-mail | index | archive | help

--=-dU7aMsznt0UvubNPaMV/
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable

I've tried to install FreeBSD 5.3-RC2, FreeBSD 5.3-RC*, FreeBSD
5.2.1-RELEASE, FreeBSD 5.2-RELEASE on my amd64 based laptop, but at boot
kernel is paniced.=20

NMI ISA a1, EISA ff
RAM parity error, likely hardware failure.

Fatal trap 19: non-maskable interrupt trap while

I tried to boot with boot -h, but seems console code broken (with
FreeBSD 5.3-RC*, FreeBSD 5.2.1-RELEASE, FreeBSD 5.2-RELEASE too)...

 Copyright (C) 1985, 2004,
  Trustees of Columbia University in the City of New York.
Type ? or HELP for help.
(/home/trey/) C-Kermit>connect
Connecting to /dev/ttyS0, speed 9600
 Escape character: Ctrl-\ (ASCII 28, FS): enabled
Type the escape character followed by C to get back,
or followed by ? to see other options.
----------------------------------------------------
=C4=84=C4=B9=C4=85-=C4=BE=C4=84O(*7,=C3=AB+,K&j=C4=84#K=C5=A0=C4=84K=C4=84$=
k=C4=BD=C5=9E=C4=98=C2=AD"=C2=AD,=C4=BE=C2=A8O=C5=A1(=C4=84
/,=C5=B9#**7=C5=B9=C3=8B=C5=B9+**7,=C3=8B=C5=B97**7=C5=B9=C3=8B=C5=B9=C5=A4=
+**7=C5=B9=C3=8B=C5=B9=C5=A4#"=C2=A82=C2=A8k=C5=9E=C2=AD=C5=BD
                                                                           =
       _+J=C4=84*=C4=8C=C2=AD(=C4=BE=C2=AD=C4=BA=C4=85 =C4=BE=C4=84(=C5=A0(=
=C4=BE=C5=A4=C2=AD J=C5=A0(
                                                                           =
                                =C2=AD(=C5=BC=C4=84=C2=AD=C5=BC=C5=A0-=C5=
=A0=C5=A4-%'=C5=A4=C3=AB=E2=94=90!
                                                                           =
                                                 ,
                                                                           =
                                                  o.J=C4=84=C2=AD      #,++=
=C2=AD+&>=C4=84-#(


I treid to install DragonFly BSD 1.0A-RELEASE. With Dfly, the serial
console working:

C-Kermit 8.0.211, 10 Apr 2004, for Linux
 Copyright (C) 1985, 2004,
  Trustees of Columbia University in the City of New York.
Type ? or HELP for help.
(/home/trey/!download/ISOs/) C-Kermit>connect
Connecting to /dev/ttyS0, speed 9600
 Escape character: Ctrl-\ (ASCII 28, FS): enabled
Type the escape character followed by C to get back,
or followed by ? to see other options.
----------------------------------------------------
Copyright (c) 2003, 2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved.
DragonFly 1.0A-RELEASE #1: Wed Jul 14 18:55:41 GMT 2004
    root@:/usr/obj/usr/src/sys/GENERIC
CPU: Mobile AMD Athlon(tm) 64 Processor 3000+ (1804.11-MHz 686-class
CPU)
  Origin =3D "AuthenticAMD"  Id =3D 0xf4a  Stepping =3D 10
=20
Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,M=
CA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=3D0xe0500000<<b20>,AMIE,<b29>,DSP,3DNow!>
real memory  =3D 267321344 (261056K bytes)
avail memory =3D 249167872 (243328K bytes)
Preloaded elf kernel "/kernel" at 0xc061e000.
Preloaded elf module "/modules/acpi.ko" at 0xc061e21c.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fdf20
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <PTLTD   RSDT> on motherboard
installed MI handler for int 10
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (154.8C)
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib1: couldn't read bus number from cfg space
pcib1: trying bus number 1
pci1: <ACPI PCI bus> on pcib1
pci1: <ATI model 4e50 graphics accelerator> at 0.0 irq 9
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_ec0: <Embedded Controller: GPE 0xb> port 0x66,0x62 on acpi0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 8385 host to PCI bridge> mem 0xe0000000-0xefffffff at device
0.0 on pci0
pcib2: <PCI to PCI bridge (vendor=3D1106 device=3Db188)> at device 1.0 on
pci0
pci2: <PCI bus> on pcib2
pci2: <ATI model 4e50 graphics accelerator> at 0.0 irq 9
fwohci0: vendor=3D104c, dev=3D8026
fwohci0: <1394 Open Host Controller Interface> mem
0xd0000000-0xd0003fff,0xd0008000-0xd00087ff irq 11 at device 6.0 on pci0
installed MI handler for int 11
fwohci0: OHCI version 1.10 (ROM=3D1)
NMI ISA a1, EISA ff
RAM parity error, likely hardware failure.

Fatal trap 19: non-maskable interrupt trap while in kernel mode
instruction pointer     =3D 0x8:0xc01dfdee
stack pointer           =3D 0x10:0xc0640c24
frame pointer           =3D 0x10:0xc0640c44
code segment            =3D base 0x0, limit 0xfffff, type 0x1b
                        =3D DPL 0, pres 1, def32 1, gran 1
processor eflags        =3D interrupt enabled, IOPL =3D 0
current process         =3D 0 (swapper)
current thread          =3D pri 12
interrupt mask          =3D net tty bio cam
kernel: type 19 trap, code=3D0
Stopped at      fwohci_init+0xfa:       movl    %ecx,%edi
db> tr
fwohci_init(c9f92000,c67eb470) at fwohci_init+0xfa
fwohci_pci_attach(c67eb470,c67eb470,c67eb398,c0640cb4,0) at
fwohci_pci_attach+0x1eb
device_probe_and_attach(c67eb470) at device_probe_and_attach+0xf2
bus_generic_attach(c67eb398,c67eb398,0,5c,c67ea540) at
bus_generic_attach+0x16
pci_attach(c67eb398,c67eb398,c67ea540,0,1) at pci_attach+0xb3
device_probe_and_attach(c67eb398) at device_probe_and_attach+0xf2
bus_generic_attach(c67ea540,c67ea540,c0482d18,0,c67ea540) at
bus_generic_attach+0x16
nexus_pcib_attach(c67ea540,c67ea540,c67ea468,0,1) at
nexus_pcib_attach+0x1f
device_probe_and_attach(c67ea540) at device_probe_and_attach+0xf2
bus_generic_attach(c67ea468,c67ea420,c0640d5c,c0268302,c67ea468) at
bus_generic_attach+0x16
nexus_attach(c67ea468,c67ea468,c6818ea8,64b000,1) at nexus_attach+0xd
device_probe_and_attach(c67ea468) at device_probe_and_attach+0xf2
root_bus_configure(c67ea420,c0477fa0,0,4) at root_bus_configure+0x16
configure(0,63dc00,64b000,0,c0137e3c) at configure+0x22
mi_startup(63d000,0,0,0,0) at mi_startup+0x90
begin() at begin+0x43
db> ps
  pid   proc     addr    uid  ppid  pgrp  flag stat wmesg   wchan   cmd
    1 c6774e60 c677cda0    0     0     0 400204  1                =20
swapper
    0 c04adc80 c0640da0    0     0     0 400204  2                =20
swapper
cpu 0 tdrunqmask 00001000 curthread 0xc04adde0 reqflags 0022
      INCOMMING IPIQS:
  tdq     thread    pid flags  pri(act)        sp    wmesg comm
   12 0xc6779de0  -1 00000e02  44( 12) 0xc677fd88        - taskqueue
   12 0xc6779d00  -1 00000e02  44( 12) 0xc9f91d88        - acpi_thermal

  tdq     thread    pid flags  pri(act)        sp    wmesg comm
   32 0xff800344  -1 00000000  44( 12) 0xff807d8c        - idle_0
   32 0xc04adde0   0 00000001  12( 12) 0xc0640d90        - swapper
   32 0xc04fa528  -1 00010c00 112( 16) 0xc0f57d88        - ithread 22
   32 0xc04fa390  -1 00010c00 110( 14) 0xc0f5ad88        - ithread 20
   32 0xc6779ec0   1 00000600  42( 10) 0xc677cd3c        - swapper
   32 0xc6779de0  -1 00000e02  44( 12) 0xc677fd88        - taskqueue
   32 0xc04fa1f8  -1 00010c00 110( 14) 0xc7ebfd88        - ithread 18
   32 0xc04fa2c4  -1 00010c00 110( 14) 0xc9f82d88        - ithread 19
   32 0xc04fa45c  -1 00010c00 110( 14) 0xc9f85d88        - ithread 21
   32 0xc04f9b98  -1 00010c00 124( 28) 0xc9f8dd88        - ithread 10
   32 0xc6779d00  -1 00000e02  44( 12) 0xc9f91d88        - acpi_thermal
   32 0xc04f9c64  -1 00010c00 124( 28) 0xc9f9cd88        - ithread 11
CURCPU 0 CURTHREAD 0xc04adde0 (0)
db>

OpenBSD 3.6 and NetBSD 2.0-BETA, Linux*, Windows is ok.=20

amd64mobile# uname -a
OpenBSD amd64mobile.trey.hu 3.6 GENERIC#136 amd64
amd64mobile# dmesg
OpenBSD 3.6 (GENERIC) #136: Fri Sep 17 12:28:10 MDT 2004
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem =3D 266924032 (260668K)
avail mem =3D 219246592 (214108K)
using 6567 buffers containing 26898432 bytes (26268K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Mobile AMD Athlon(tm) 64 Processor 3000+, 1804.34 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL=
USH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully
associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "VIA K8HTB Host" rev 0x01
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M10 NP" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Texas Instruments TSB43AB21 FireWire" rev 0x00 at pci0 dev 6 function 0
not configured
re0 at pci0 dev 8 function 0 "Realtek 8169" rev 0x10: irq 5, address
00:90:f5:32:10:37
rgephy0 at re0 phy 7: RTL8169S/8110S media interface, rev. 0 PHY
"ENE CB-1410 CardBus" rev 0x01 at pci0 dev 12 function 0 not configured
vendor "Winbond", unknown product 0x8481 (class mass storage subclass
miscellaneous, rev 0x01) at pci0 dev 14 function 0 not configured
vendor "Winbond", unknown product 0x8482 (class mass storage subclass
miscellaneous, rev 0x01) at pci0 dev 14 function 1 not configured
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB 2.0" rev 0x82: irq 5
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
"VIA VT8235 ISA" rev 0x00 at pci0 dev 17 function 0 not configured
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2040AT>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CDRW/DVD SN-324F, U204> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 10
ac97: codec id 0x414c4740 (Avance Logic <40>)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auvia0
"VIA VT82C686 Modem" rev 0x80 at pci0 dev 17 function 6 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=3D0x0 rrootdev=3D0x300 rawdev=3D0x302

>> NetBSD/amd64 BIOS Boot, Revision 3.1
>> (mthomas@cerealbox.englab.brocade.com, Thu Apr 22 15:33:58 PDT 2004)
>> Memory: 638/260032 k
>
> boot
booting hd0a:netbsd
5804048+631560+601496 [440784+264071]=3D0x8635b8
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 2.0_BETA (GENERIC) #0: Thu Apr 22 16:47:08 PDT 2004
      =20
mthomas@cerealbox.englab.brocade.com:/u2/netbsd-2-0/amd64/obj/sys/arch/amd6=
4/compile/GENERIC
total memory =3D 254 MB
avail memory =3D 237 MB
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (                     )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Mobile AMD Athlon(tm) 64 Processor 3000+, 1804.25 MHz
cpu0: features:
e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 1 MB 64b/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully
associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully
associative
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 16 page colors
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type ISA
ioapic0 at mainbus0 apid 1 (I/O APIC)
ioapic0: pa 0xfec00000, version 3, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x3188 (rev. 0x01)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb188 (rev.
0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: ATI Technologies product 0x4e50 (rev.
0x00)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
Texas Instruments TSB43AA21 OHCI IEEE 1394 Host Controller (Firewire
serial bus, interface 0x10) at pci0 dev 6 function 0 not configured
Realtek Semiconductor 8169 10/100/1000 Ethernet (ethernet network,
revision 0x10) at pci0 dev 8 function 0 not configured
ENE Technology, Inc. CB1410 Cardbus Controller (CardBus bridge, revision
0x01) at pci0 dev 12 function 0 not configured
Winbond Electronics product 0x8481 (miscellaneous mass storage, revision
0x01) at pci0 dev 14 function 0 not configured
Winbond Electronics product 0x8482 (miscellaneous mass storage, revision
0x01) at pci0 dev 14 function 1 not configured
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB
Controller (rev. 0x80)
uhci0: interrupting at ioapic0 pin 16 (irq 9)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB
Controller (rev. 0x80)
uhci1: interrupting at ioapic0 pin 17 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB
Controller (rev. 0x80)
uhci2: interrupting at ioapic0 pin 18 (irq 10)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
VIA Technologies VT8237 EHCI USB Controller (USB serial bus, interface
0x20, revision 0x82) at pci0 dev 16 function 3 not configured
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8235 (Apollo KT400) PCI-ISA Bridge (rev. 0x00)
viaide0 at pci0 dev 17 function 1
viaide0: VIA Technologies VT8235 ATA133 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at viaide0 channel 1
auvia0 at pci0 dev 17 function 5: VIA VT8235 AC'97 (rev 0x50)
auvia0: interrupting at ioapic0 pin 18 (irq 10)
auvia0: ac97: Avance Logic ALC202 codec; headphone, 20 bit DAC, 18 bit
ADC, Realtek 3D
auvia0: ac97: ext id 607<AC97_22,AMAP,SPDIF,DRA,VRA>
audio0 at auvia0: full duplex, mmap, independent
VIA Technologies VT82C686A MC-97 Modem Controller (miscellaneous
communications, revision 0x80) at pci0 dev 17 function 6 not configured
pchb1 at pci0 dev 24 function 0
pchb1: Advanced Micro Devices AMD64 HyperTransport configuration (rev.
0x00)
pchb2 at pci0 dev 24 function 1
pchb2: Advanced Micro Devices AMD64 Address Map configuration (rev.
0x00)
pchb3 at pci0 dev 24 function 2
pchb3: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb4 at pci0 dev 24 function 3
pchb4: Advanced Micro Devices AMD64 Miscellaneous configuration (rev.
0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
ioapic0: enabling
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <FUJITSU MHT2040AT>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using
DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CDRW/DVD SN-324F, , U204> cdrom
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using
DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
Fri Nov  5 17:54:04 CET 2004
swapctl: adding /dev/wd0b as swap device at priority 0
Starting file system checks:
/dev/rwd0a: file system is clean; not checking
Setting tty flags.
Setting sysctl variables:
Starting network.
/etc/rc: WARNING: $hostname not set.
IPv6 mode: host
Configuring network interfaces:.
Building databases...
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Starting syslogd.
Checking for core dump...
savecore: no core dump
Mounting all filesystems...
Clearing /tmp.
Checking quotas: done.
Starting virecover.
Starting local daemons:.
Updating motd.
Starting inetd.
Starting cron.
Fri Nov  5 17:54:08 CET 2004

NetBSD/amd64 (Amnesiac) (console)

login:root
Password:
Last login: Fri Nov  5 17:52:43 2004 on console
Nov  5 17:54:33  login: ROOT LOGIN (root) ON console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 2.0_BETA (GENERIC) #0: Thu Apr 22 16:47:08 PDT 2004

Welcome to NetBSD!

Nov  5 17:54:33  login: ROOT LOGIN (root) ON console
Terminal type is vt100.
We recommend creating a non-root account and using su(1) for root
access.
# uname -a
NetBSD  2.0_BETA NetBSD 2.0_BETA (GENERIC) #0: Thu Apr 22 16:47:08 PDT
2004=20
mthomas@cerealbox.englab.brocade.com:/u2/netbsd-2-0/amd64/obj/sys/arch/amd6=
4/compile/GENERIC amd64

Any idea?



--=20
Micsk=C3=B3 G=C3=A1bor
HP Accredited Platform Specialist, System Engineer (APS, ASE)
Szint=C3=A9zis Computer Rendszerh=C3=A1z Rt.     =20
H-9021 Gy=C5=91r, Tihanyi =C3=81rp=C3=A1d =C3=BAt 2.
Tel: +36-96-502-216
Fax: +36-96-318-658
E-mail: gmicsko@szintezis.hu
Web: http://www.hup.hu/
GPG Key fingerprint: 6FA1 D8BF 3C73 0570 ED5D  82AC A3BE 4E6A CF95 5F50

--=-dU7aMsznt0UvubNPaMV/
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: Ez az =?ISO-8859-1?Q?=FCzenetr=E9sz?=
	=?ISO-8859-1?Q?_digit=E1lis?= =?ISO-8859-1?Q?_al=E1=EDr=E1ssal?= van
	=?ISO-8859-1?Q?ell=E1tva?=

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQBBi61So75Oas+VX1ARAp+OAKC+1FgOSt4vyukEbe2byBakia2IugCgl6aE
PYwnlv3FQWZJ161/gNwl1vI=
=gouF
-----END PGP SIGNATURE-----

--=-dU7aMsznt0UvubNPaMV/--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1099672914.7059.13.camel>